Re: questions
Wiley Horne-- So. Calif.
>Hi Howard,
I don't own any of the Fujihiro brand chisels sold by Hida. I will quickly add that I have acquaintances who are Japanese tool experts, and who have a high regard for these chisels.
The Imai chisels I have are from the line which was sold at one time by Misugi Designs. These were identified as 'sword steel' or 'special white steel'. The only point of my post was to suggest that people interested in buying the Imai chisels from Iida-san (Tomohito) might wish to ask him about the steel and about the handling--if their purpose is to obtain the original 'sword steel' product. You want to get what you're paying for.
That said, I believe the Fujihiro chisels sold by Hida to be functionally excellent, judging from the opinions of people that I know who have owned and used these chisels for a long time.
And just a philosophical point....Comparisons between chisels are necessarily going to be anecdotal--small samples, different test situations, etc. So peoples' experiences differ, even for what appears to be the same article. For example, my experience with the Imai sword steel chisels has been that they are remarkably tough customers, and I have done lots of mortising with them in figured hardwoods at bevel angles less than 30 degrees, and without babying them at all. On the other hand, Jim Shaver showed a photo on this forum within the last two months of an Imai sword steel mortise chisel which lost a big chip out of the edge while he was chopping into a burr section of white oak (if I remember correctly).
Wiley