Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

Coffin Smoother

Posts

Coffin Smoother

#1

Coffin Smoother

Mike G. in SC

>Hi Folks,

Haven't visited in a while.Been rather busy and hoping to get busier. I Saw a Lignum body Coffin smoother today and almost bought it until I noticed it seemed a little out of square,like someone tried to flatten the sole and got it out of square. Other than that,the plane looks in good condition with tapered iron, cap iron and wedge. Is this plane a good purchase or should I pass on it. The price is reasonable at 30.00,I think.

Thanks,Mike G. in SC

Re: Coffin Smoother

#2

Re: Coffin Smoother

Stephen Shepherd in the State of Deseret

>Mike,

Is it a two piece with a lignum vitae sole? Or is it solid lignum vitae? Either way probably not a bad price. Does it look old?

Stephen

Re: Coffin Smoother

#3

Re: Coffin Smoother

Mike G. in SC

>Hi Stephen,

It is solid Lignum and it looks pretty old. The cap iron needs some work,but the iron isn't in bad shape except for the usual mushrooming of the end from hammer blows. It has a maker's mark,but I can't recall what it is at the moment. Thanks for your response.

Mike G. in SC

Re: Coffin Smoother

#4

Re: Coffin Smoother

Todd Hughes

>...If it is really Lignum I would have to say it is a pretty uncommon plane. I have seen more then a couple lignum planes but if I remember right always larger jack planes, all were craftsman made. Tradtionaly it is thought it was often shipwrights that made these since they had access to Lignum... Does seem that most I have seen were Razee stlye which were supposed to be favored by shipwrights too....don't know

...If made by a profesional named maker of planes and made out of lignum it would be in my opinon a pretty rare plane and probably pretty desirable, I would snap it up in a second if in that condition and for that price.

....Not to doubt you but look at it good to make sure it is Lignum and not just beech that is darkened...somtimes beech sort of looks like lignum a little if oiled and dirty though of course the lignum is very much more heavy ....Todd

Re: Coffin Smoother

#5

Re: Coffin Smoother

Mike G. in SC

>Thanks Todd. I'm pretty sure it's Lignum. I should have been more specific. The Iron and Cap iron are what are marked. The body isn't marked.

Thanks again,Mike G. in SC

Re: Coffin Smoother

#6

Re: Coffin Smoother

Mike G. in SC

>Well, I went back and bought the coffin smoother. The body is definitely Lignum. The Iron and Cap Iron are marked " William Ash & Co."

I saw another coffin smoother there,but in Beech as well as a couple of other molding planes I wouldn't mind having.

Mike G. in SC