Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

18th century shop size

Posts

18th century shop size

#1

18th century shop size

mike muzzarelli

>What size were shops in the 18th century. I am interested in 1 or 2 man shops.

Re: 18th century shop size

#2

Re: 18th century shop size

Bjenk Ellefsen

>I can tell you how big "boutiques" had to be in Paris in 1768.

At least 12 feet high to allow the handling of a typical board which was about 12 feet in length. 15 to 18 feet deep so that there is at least 3 feet of space at the front of the workbenches, 9 feet of workbench and six feet at the end so that each worker can place the wood and their work. The width is determined by the lot where the boutique is located and the number of workbenches that the owner wants to put inside. Benches are about 18 to 20 inches wide and as much space between each workbenches for the workers so that they have about 3'4" each compared with how many workers you have and that will determine the width of the boutique.

All units are in French "pouce" and "pieds".

:)

Re: 18th century shop size

#3

Re: 18th century shop size

Dean J in MN

>Christopher Townsend's home and workshop at 74 Bridge Street (lot 51) had a shop which was 12 feet by 20 feet. This is the home John Townsend was born and raised.

John Townsend, Newport Cabinetmaker, The Metropolitan Museum of Art (ISBN 1-58839-145-0) has this and some other data about the Townsend's homes and shops.

-Dean

Re: 18th century shop size

#4

Christopher Townsend's shop

Jim in VA

>Christopher Townsend, father of John Townsend, in Newport had a shop that was approximately 12 feet by 20. In the attached photo, you see the workshop that was (is) attached to the house on the left. Arguably, some of the most beautiful furniture in America came out of shops like these. Although it seems small by modern standards, it must be remembered that there no room was set aside for tablesaws, router tables, sanders, etc. Whenever I think my shop is too small, I contemplate Christopher's shop and I am ashamed of my greed for space.

It's my understanding that workshops in Philadelphia (and certainly in England) often employed many more craftsman and were much larger. But you asked about 1 or 2 man shops. Christopher's shop fits that bill.


img

Re: 18th century shop size

#5

Re: Christopher Townsend's house

Jim in VA

>Photo of the house...workshop addition is to the right.


img

Re: 18th century shop size

#6

So, about the size of a one-car garage

Bill Houghton, Sebastopol, CA

>Meaning, if I had the courage to get rid of my power tools, I could make furniture like that...right. Kind of like the old joke, "Doctor, will I be able to play the violin after the operation? I've always wanted to."

But at least I could do it in the space I've got.

Did this include wood storage, or was there a separate woodshed?

Re: 18th century shop size

#7

Re: Christopher Townsend's house

Stephen Shepherd in the State of Deseret

>Look at all of those windows and 2 doors on the street, which direction does the shop (street side) face?

Stephen

Re: 18th century shop size

#8

Re: Christopher Townsend's house

Jim in VA

>If I recall correctly, the house (and thus the street side of the workshop) faces north. Of course, the workshop being only one room wide would also have a southern exposure. I'm guessing the big windows were added later. I don't know about the doors.

Re: 18th century shop size

#9

Re: So, about the size of a one-car garage

Jim in VA

>I hear ya Bill. For just building furniture, I'd be willing to give us every power tool except for my bandsaw. And maybe my lathe. And I've thought about doing just that, except that my workshop is also used for a wide variety of tasks...such as building bookcases and cabinets for the family room. I really don't want to give up my TS, routers, and sanders for those types of projects.

As far as Christopher's wood storage goes, I recall reading that there were several small outbuildings on the property but cannot find a reference to those right now.

Re: 18th century shop size

#10

it varied

Adam Cherubini

>I don't think there's a definitive answer to how large 18th c shops were as a rule. There were large industrial shops with many workers and tiny craft shops. Rural shops and urban shops may have been large or small. I have reason to believe that some shops in early Philadelphia shared living space with the master's family. They may have been very small, taking up the space in the front of a joined up house. As folks grew wealthier, shops became outbuildings or work space was rented elsewhere.

The Dominy shop is pretty small. Is it 12'x20 or so? That has 2 benches. I think my shops is 16x14 or so. It has 2 benches, a tool chest, 2 sets of saw horse and a grindstone in it. Recent guests found it comfortable enough for an afternoon of saw sharpening.

I think the nature of the tools sort of lend themselves to small spaces. You run a short tool over a long board, not a long board over a short tool. So I think a 12x20' power tool shop may be ridiculous, where a 12x20 hand tool shop would be princely.

Adam

Re: 18th century shop size

#11

joiner, framer, or cabinet maker?

paul womack

>