Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Adding UHMW to a shoot board

Posts

Adding UHMW to a shoot board

#1

Adding UHMW to a shoot board

Dominic in Buck's County PA

>Hi gang,

While cleaning up the shop over the past weekend I came across this sheet of UHMW (or is it UHMV?...whatever!) that I purchased from PeachTree USA several years back. It was meant as a face for a tablesaw jig that never got made. It fell behind some boards and was forgotten until this weekend.

I took one look at it and then my shoot board and decided it was time for a retrofit. I cut it to size and countersunk (8) holes for brass screws.

I had a chance to use this while I was making some tool hangers for my tool cabinet. It worked even better than I had hoped. My LN#9 glides right over it like it was on ice!

Thanks for viewing!

Photobucket

See ya around,

Dominic

Re: Adding UHMW to a shoot board

#2

Actually it's UHMWPE...

Scott Burr in Ben Lomond, CA

>But who cares! Nice addition to you shooting board Dom. Please make sure those screws are well countersunk, we can't be scratching up that #9.

I'm incorporating a bit of into the corebox for my LV tail vise.

Re: Adding UHMW to a shoot board

#3

Re: micro adjust

paul womack

>Can you post details of the interesting looking angle adjuster on that board?

BugBear

Re: Adding UHMW to a shoot board

#4

Question.........

Bill Tindall, E.TN

>The hardware at the top can't just "glide by". What do these screws or whatever do? Seems that there are some extra "features" here you haven't revealed.

Re: Adding UHMW to a shoot board

#5

Micro adjust for fence

Dominic in Buck's County PA

>Hi Bill,

I didn't mention the fence hardware because I thought they were "old news". That's a micro adjust for the fence. It's just a captured allen head socket screw that bears against a metal plate on the fence. I got the idea for this from tablesaw jigs I used to cut segments for bowls.

See ya around,

Dominic

Re: Adding UHMW to a shoot board

#6

Re: Actually it's UHMWPE...

Dominic in Buck's County PA

>Scott,

Thanks champ! And oh yeah, those screws are well below the surface! I tried it out with a crappy old No5 body I had first to make sure it would not scratch it.

See ya around,

Dominic

Re: Adding UHMW to a shoot board

#7

Re: micro adjust

Dominic in Buck's County PA

>I'll take some more photos tonight.

Re: Adding UHMW to a shoot board

#8

Re: Adding UHMW to a shoot board

Victor Parisian

>Very well done. yes post details of the micro adjust.

Victor in Hot and Sticky Humid Houston

Re: Adding UHMW to a shoot board

#9

Micro Adjust photos

Dominic in Buck's County PA

>Here are the photos that detail the "micro adjust" feature on my shoot board.

I use a 3/4" x 3/4" x 1 1/2" block of red oak with a 3/16" T-Nut installed as a jacking screw base. A 3/16" socket head cap screw is threaded into this base and bears against a metal angle clip attached to the fence. The pivot screw for the fence is attached to the base via another 3/16" socket head cap screw. A 3/16" T-Nut is installed in the base of the sled to receive it.

The fence pivots freely and I use a square to get it to as close to 90 deg as I can. Then I advance the screw and make it bear against the metal plate on the fence. This limits the travel. I take some test cuts and the when it looks good I secure the fence with a screw. In my next version it will be a bolt/nut that is in an oversized hole.

That's pretty much it.

Photobucket

Photobucket

Photobucket

See ya around,

Dominic

Re: Adding UHMW to a shoot board

#10

Re: Micro Adjust photos  *LINK*

Derek Cohen (in Perth, Australia)

>In my next version it will be a bolt/nut that is in an oversized hole.

Hi Dominic

Some excellent thought went into that design of yours. Well done! Why do you want to change the micro-adjustable section?

I did the micro-adjustable oversized hole thing about a year or so ago, and think it is the way to go (not necessarily the design, but the adjustability factor). It helps with long-term maintenance of the board.

Below is a link to recent examples on my website. I did post these before but not on Wood Central.







Regards from Perth

Derek


Advances in a ramped shooting board

Re: Adding UHMW to a shoot board

#11

Re: micro adjust

paul womack

>I see a screw and a bolt holding down the fence; it looks like the screw forms a "fixed" pivot point.

How is the bolt installed to allow adjustment?

BugBear

Re: Adding UHMW to a shoot board

#12

Re: micro adjust

Dominic in Buck's County PA

>You wrote:

"I see a screw and a bolt holding down the fence; it looks like the screw forms a "fixed" pivot point.

How is the bolt installed to allow adjustment?"

The 3/16" socket head cap screw (the one with the washer) is the pivot point. The phillips head screw just locks the fence down after it is dead on. The socket head cap screw is about 1 3/8" long and goes through the fence and shoot board. On the underside of the shoot board there is a T-nut installed that recieves the 3/16" socket head cap screw.

Re: Adding UHMW to a shoot board

#13

Re: Micro Adjust photos

Dominic in Buck's County PA

>Derek,

Once I get my fence "dead on" 90 degrees I lock it in position using a screw driven in from the top. This was a "down and dirty solution" but not very helpful when it comes time to replace the fence. The wooden knob/bolt arrangement you made is more what I was thinking of. When it comes time to adjust the fence, or replace it, simply back off the nut. The good news is that I can retrofit my shoot board pretty easily.

Thanks again for the compliments. And I have to say that your shoot board is MUCh prettier than mine! :>) Do you make all you shop jigs from Jarrah?

See ya around,

Dominic

Re: Adding UHMW to a shoot board

#14

source

paul womack

>The phillips head screw just locks the fence down after it is dead on.

So; the fence is free to pivot until the phillips screw is tightened.

But it appears that the phillips screw is a pretty good fit in its hole; how does the fence move, even when the screw isn't tight?

I believe that it does - I just can't figure how!

BugBear

Re: Adding UHMW to a shoot board

#15

Re: source

Dominic in Buck's County PA

>Because I don't drive the screw home until I have the fence at 90deg. The hole in the fence is pre-drilled and counter sunk. There is no corresponding hole in the base. So I set the fence at 90 deg, and then drive the screw in.

Re: Adding UHMW to a shoot board

#16

facets

paul womack

>There is no corresponding hole in the base. So I set the fence at 90 deg, and then drive the screw in.

Ah! It's the first point I didn't have - no predrilled hole in the base.

BugBear