Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Stanley Works *LINK*

Posts

Stanley Works *LINK*

#1

Stanley Works *LINK*

Wiley Horne-- So. Calif.

>This is beginning to get around, as a result of an excellent blog by Chris Schwarz. See link.

Wiley


Stanley reenters plane market

Re: Stanley Works *LINK*

#2

Wow, this is WEIRD!

Dominic in Buck's County PA

>My buddy and I were just talking at lunch today about this very thing. his exact words were, "I wish Stanley would get back into making high quality hand planes! And it would be awesome if they would start making Bedrocks again!"

Note to self: See if he can do that with lottery numbers of the Stock Exchange....

Seriously, this is pretty cools news. Hopefully they won't loose sight of the goal and just reproduce updated yet mediocre versions of classic planes.

See ya around,

Dominic

Re: Stanley Works *LINK*

#3

Re: Wow, this is WEIRD!

wilbur

>So if these new Stanley planes really are going to be competition for Lie-Nielsen and Lee Valley:

1. What is this going to to the the collector market, especially if Stanley winds up rereleasing the Bedrock line and the #1 Bailey?

B. What the heck is Patrick Leach going to do with his website?

:@)

Re: Stanley Works *LINK*

#4

Re: Wow, this is WEIRD!

Dominic in Buck's County PA

>You know, I doubt they'd make a No1. I think they'll go for more "main stream" planes (along the lines of the ones mentioned in the blog).

Just as a side question here: I wonder how many No1's LN sells each year? Can't be that many. Right?

As far as the Bedrocks go, Stanley will have to try pretty damn hard to be as good as the old ones, or as sweet as the LNs!

I gotta wonder about the new adjusters they were talking about. It's not that I think LV has anything to worry about. IMHO they've got the inside track when it comes to innovations (not to mention customer service).

All in all it should be interesting to see what Stanley comes up with,...to say the least.

Dominic

Re: Stanley Works *LINK*

#5

Re: Stanley Works *LINK*

Bill Houghton, Sebastopol, CA

>You can get on their e-mail list of promotions and new product announcements at the link below. Of course that means all kinds of dreck about FatMax measuring tapes, but maybe there'll be some gold in there.

Not that I need more planes....


This linky, bottom right corner

Re: Stanley Works *LINK*

#6

Thanks Wiley! That new 92 looks cool...

Scott Burr in Ben Lomond, CA

>The Stanley family of shoulder planes are a personal favorite of mine.

I wonder what the ruled marking on the side are for. Hopefully they maintained the low profile/cg which is why I like them.

They should include some old design elements IMHO like the eclipse type cutouts on the sides of the planes. One thing I do like is the shape is that of the old Defiance style. I always like that.

Re: Stanley Works *LINK*

#7

Re: Wow, this is WEIRD!

Wiley Horne-- So. Calif.

>This is an interesting development. Stanley clearly must think the market for 'good' handplanes is big enough for another competitor. It'll be interesting to see which retailers will carry these planes. Home Depot? Lowes?

What I can't figure out.....I don't see too many guys down at HD that look like they're game for a $150+ No. 4 or No. 5. Or even know what one is. Or have sharpening stones, etc.

So is Stanley thinking Woodcraft maybe?

Wiley

Re: Stanley Works *LINK*

#8

Re: Wow, this is WEIRD!

Pam Niedermayer, Austin, TX

>They've spent millions establishing the brand, may as well try to take further advantage of it. Just think of all the power tool guys who only know the Stanley name and the fact that, crummy as the most recent current models are, they're still carried in places like WoodCraft.

Pam

Re: Stanley Works *LINK*

#9

Re: Stanley Works

Victor Parisian

>So how are they going to mount the lazer cutting guides and the digital readout for the depth of cut?

Curious minds etc...

Victor - in HOt and sticky-Humid Houston

Re: Stanley Works *LINK*

#10

Will the English Stanley Planes still be available

Patrick Gibbons, Katy, TX

>

Re: Stanley Works *LINK*

#11

Re: Stanley Works

Patrick Gibbons, Katy, TX

>Stanley has their own factories in England and Mexico so they should be able to control the quality. It looks like they want to produce with tighter specs and they've thought the product design through. Build quality from Mexico is excellent. I think this is a real niche that they can fill. Up til now the only competition in the lower end was Record, English Stanley, Anant, Groz, Footprint and the used tool fixer-upper market. In my estimate, the used tool was the best way to go, but it required learning a set of skills to put the plane into working order. I'll be the first to admit that many of my fixer-uppers seem to be only a little better after I've fixed them up than before. My first bench plane was an English Stanley #3 that I souped up with an aftermarket blade, cap iron and rosewood handles. I've always felt I put more money in than the worth of the results I got back out. I hope these planes live up to the anticipation.

Re: Stanley Works *LINK*

#12

Re: Wow, this is WEIRD!

Eric in Los Gatos

>According to the article they will not be carried at big box and hardware stores. Just Woodcraft, et al.

Eric in Los Gatos

Re: Stanley Works *LINK*

#13

Rockler, not Woodcraft??

David Cockey

>I expect Rockler will carry the new Stanley planes. They currently carry several of the Stanley "Made in England" planes but no premium ones such as Lie-Nielsen or Veritas.

Woodcraft currently carries Lie-Nielsen planes as well as the inexpensive, Made in India, Groz planes. I don't believe they currently carry any Stanley items. So if they added the new Stanleys there plane line-up might be getting crowded with three price levels.

Other likely distributors are "tool stores", particularly those who currently carry Stanley planes. In south-east Michigan Performance Tool is a likely seller.

Re: Stanley Works *LINK*

#14

Re: Rockler, not Woodcraft??

James Watriss

>What I've seen up this way is that Woodcraft has L-N, Stanley, and Groz. (They've really been pushing the Groz in the monthly flyers, too.)

Rockler had Groz, then picked up Stanley after Groz got lambasted in print, and last time I was in, they had a few Clifton planes in stock.

I dunno about these things. If the machining is right, they could be nice, but I'm wondering about the virtues of the solid frog design they came up with. That's a big solid block, and if internal stresses warp it at all, there's no way to take it out, flatten it, and align it properly with the body of the plane. The adjustable mouth idea on the #4 sounds interesting for various reasons... Most of the work I do with my #4 (or #3, personal preference) is all over the map... some quick and dirty, and some is very fine. Adjustable throat is easier to machine, I'd think, than an adjustable frog. I'll take a look when they're out. But I'm already pretty well stocked with vintage Stanley, so I doubt I'll nibble.

For me, I like the vintage stuff. I didn't think the skills required to tune one properly were so hard to master. For me, I go with premium planes when there's a feature I can find in the oldies but goodies... high angle frogs, bevel up planes, rabbet block planes, and the like.

I dunno though... Workable old #3 and 4 planes are still pretty affordable on the used market these days. And the old rosewood handles just feel different somehow. I wonder if there's a market for restoring and rehabbing these things, much like the Wiktor Kuc hand drills. Throw in an aftermarket blade and a good cap iron, and a good sharpening...