Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

Need your help

Posts

Need your help

#1

Steven Antonucci

Need your help

steve antonucci

>I typically hang out with the turners, but I was helping my mother in law clear out my father-in-laws stuff. 8 hours of moving stuff and it doesn't even look like I was there!

First, is a 602B Stanley plane. I sharpened it and cleaned off all of the crud, and it cuts pretty nicely.

More to follow...


img

Re: Need your help

#2

Steven Antonucci

Unknown Plane

steve antonucci

>Another Stanley, unknown type... I think it is missing a knob on the front?

Sharpened the iton, cuts pretty nicely...


img

Re: Need your help

#3

Steven Antonucci

Whatzit saw?

steve antonucci

>No idea what you'd do with this...


img

Re: Need your help

#4

Steven Antonucci

Marking Gauge and small vise

steve antonucci

>Know what they are, but not suw what the little vise would have been used for?


img

Re: Need your help

#5

Re: Marking Gauge and small vise

Bill Houghton, Sebastopol, CA

>The marking gauge looks from the picture like a Stanley 64-1/2 (at least that's what my similar one is). It became my favorite gauge after I scored it at a garage sale - the oval head is very comfortable to grip, and the point can easily be adjusted for wear or replaced by loosening the screw in the beam, which allows the slot in which the point is captured. Make sure there's a brass "foot" under the screw in the head that tightens the bar in place. If not, get a little piece of brass sheet stock - thickish, that will fit in the space excavated for the foot - and make yourself one. Stanley no longer sells replacements (or at least doesn't list them in their parts catalog).

I have the variation of this gauge that has a regular rounded rectangular head, and have been thinking that, with a little coping saw work to make a cross-wise slot where the pin fits, I could make a cutting gauge very easily. That idea is about #97 on my round tuit list - or maybe #197, never sure how long the list is.

The vise is one of millions - I've got two, I think - that were sold as portable vises. I've never quite understood the market for these. My son was quite excited years ago, when he was about eight and a local lumberyard was shutting down, to find one on the clearance table. I suspect that was one market: children who were interested in making things but either too short to use the parental bench or not permitted to do so. I imagine another was the weekend warrior whose work was too small to require a real vise, and who perhaps couldn't have a permanent setup. Reading through old Popular Mechanics magazines and "Shopnotes," I find a large number of references to modelmaking practices in certain periods - which implies to me that there were a lot of people living in apartments and other places where they couldn't make furniture or didn't need to remodel/maintain the house, so expressed their desire to build by making models. These vises would not have sufficed for a serious modelmaker, but could have been enough for a beginner.

I doubt that professionals carried them in the toolbox much; they seem too small and lightweight to me. There might well have been a market for a portable vise for small metal bits - the old mortise locksets have to be disassembled to reverse the "hand" for installing in a door, and I've had a few occasions when I had to file bits to improve performance. But some of the larger portable vises, like the 3" one I inherited from my uncle, would have been more suited for such purposes.

Re: Need your help

#6

Looks more like a fishing tool to me

Bill Houghton, Sebastopol, CA

>though my experience with fishing is almost 50 years old by now (experience with catching a few years older, which may explain why I gave it up).

Re: Need your help

#7

Re: Unknown Plane *LINK*

Bill Houghton, Sebastopol, CA

>Stanley made dozens - more than dozens - of different block planes, mixing and matching different adjustment mechanisms, body lengths, blade widths, knob styles, fixed or adjustable mouths, etc., etc. Your resource is, of course, Patrick Leach's Blood and Gore, linked below.

I think someone - St. James Bay? - sells replacement knobs.

People get negative about the fixed-mouth planes, but they do have the virtue of simplicity and less weight. Keep the iron sharp, and this could be a very good utility plane. And besides, you've already invested the sweat, as you would, like a good son-in-law, even if there weren't tools involved - right?

The 602 is a major coup; maybe, as you dig deeper into the piles, you'll find more delights. I really enjoy using things from my family history. There's an extra fizz in doing so.


Blood and Gore

Re: Need your help

#8

Steven Antonucci

I'm a turner... knobs are no probs...!

steve antonucci

>I'll have a knob on it in no time at all...

Round numbers- what's the 602B worth? I don't want to sell it, but my MIL would get a kick out of knowing that I kept one of her husband's treasures...

Steven

Re: Need your help

#9

Dang Steve!

Scott Burr in Ben Lomond, CA

>A 602! That's a gloat if'in I've every seen one. That's a high dollar, very sought after plane.

Scott, handing out another YOU SUCK! today.

Re: Need your help

#10

Steven Antonucci

Which end do I drill the hole in?

steve antonucci

>I want to hang it on my pegboard. Or maybe I'll paint snowmen on it?

I thought it worked too well to be a junker...

Thanks

Steve

Re: Need your help

#11

Re: Need your help *LINK*

Wiley Horne-- So. Calif.

>Steve,

Attached is a link to Bob Kaune's study of Bedrock types. Does yours have a straight keyhole shaped piercing for the lever cap screw? Looks like it to me. If so, yours would be a Type 9 (1931-32). If it is a kidney-shaped piercing, it's a Type 10 I think (1933-41). Anyway, you can figure it out for yourself using the type study.

Wiley


Bedrock Type Study

Re: Need your help

#12

DON'T DRILL IT

Kevin French, Antrim, NH------WebKitFormBoundary3x

>Steve attach a 24" MAGNETIC BAR to your pegboard.

I've got a #4 and a #5 on one, just keep them in the center.

Re: Need your help

#13

Steven Antonucci

You guys are so easy...

steve antonucci

>Didn't you feel me pulling your leg?

I won't drill it. Promise. But I think it would look cool with snowmen or bunnies painted on it...

Steve

Re: Need your help

#14

Re: Whatzit saw?------WebKitFormBoundaryq+RbcZ5iRA

Rick W------WebKitFormBoundaryLAS+gJXDtwvtBHB2----

>If that saw is a Stanley, it's a Bead Saw, used for installing weatherstripping. Walters' book values it at $25-$75.

Rick W

------WebKitFormBoundaryq+RbcZ5iRArAqWj8

Re: Need your help

#15

Re: You guys are so easy... But not CHEAP

Kevin French, Antrim, NH------WebKitFormBoundary3x

>Steve I've seen WAY too many plane/tools in the dump with unwanted holes, initials engraved on every piece of the tool, and any number of other mutilations of tools, some being correctable,some not.

But if you want to paint my vote is for a Fall scene. Photobucket

Re: Need your help

#16

Great GOOGLY MOOGLY!!

Dominic in Buck's County PA

>A 602!? Holy CRAP!!

Steve! Holy CRAP!! I mean,.....Holy CRAP!!

That is a FANTASTIC find! You should see what those babies are fetching on Ebay!

Want to trade for some curly cherry burl? :>) (Yeah,....right.....)

See ya around,

Dominic

Re: Need your help

#17

:^)....

Scott Burr in Ben Lomond, CA

>I know your smarter than that... Send it to me I'll be happy to place that hole in the right spot. I might a few years but, I'll get it done.

Re: Need your help

#18

Beavers are in order here!

Scott Burr in Ben Lomond, CA

>Maybe a woodchuck too!

Re: Need your help

#19

eBay to the rescue!

Bill Houghton, Sebastopol, CA

>When I typed in "Stanley 602" in completed listings, I got two: $345 and $460. The "4" in each price is kinda square, but the others are mostly round.

Re: Need your help

#20

Nah. Paint it chartreuse

Bill Houghton, Sebastopol, CA

>Then you can enter the plane-off contest coming up, against Derek Cohen's orange block plane, Cooper Suter's yellow No. 605, and my gold-painted No. 62.

Re: Need your help

#21

Steven Antonucci

Must be my lucky day...

steve antonucci

>I don't know much about planes, except how to use them. I knew it looked like a pretty good plane, and when I sharpened the iron and got rid of all of the crud, it cut pretty nicely.

Now imagine if I fussed with it...?

Steve

P.S. How much cherry burl you got? (Just kidding, it was my father in laws, and I plan on keeping it...)

Re: Need your help

#22

Re: Must be my lucky day...

Dominic in Buck's County PA

>Steve,

You wrote:

"...Just kidding, it was my father in laws, and I plan on keeping it.."

I hear ya' man! Family "hierloom" tools like that are priceless.

Use it in good health!

later,

Dominic

Re: Need your help

#23

Steven Antonucci

Thanks for all of your help!

steve antonucci

>