Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

What to do with #3

Posts

What to do with #3

#1

What to do with #3

Dan Donaldson

>I have a #3 Stanley/Bailey handplane that is a type 14 as far as I can tell from the B&G type study. The wood is good (still part of the decal on the tote), it has about 1 1/4 inches left on a sweetheart iron and the rest of the parts are in good shape and clean. The problem is that someone filed out the mouth far enough that there is not enough travel in the frog to close it down. It has a mouth of close to 1/8th with the frog all the way forward. Wondering what to do with it. Sharpen it up and see what it does? Turn it into a scrub plane? Try to find another body? Or find someone that has a body and needs the rest of the parts. I don't have any money invested in it, so that is not a consideration. Just looking at options.

Thoughts?

Re: What to do with #3

#2

Anyone tried to . . .

steve mackay

>make a #3 rabbet plane yet ? Its been done with, about, every other size. As long as its been fooled with already. Might be another first with bragg'n rights !

Re: What to do with #3

#3

Re: What to do with #3

James Clark

>This is probably one of those stupid questions but I have to ask anyways,

Have you tried to loosen the screws that holds the blade adjuster to the plane body its self and see if you can slide the blade forward.

More than likly you already have.But I had to ask just out of curiosity,

Sincerely,

Jim

Re: What to do with #3

#4

Coupla thoughts

Neal in San Jose

>Well, maybe the same thought twice. How about a thicker blade? I know Ron Hock will make custom blades - his standard issue (along with Lee Valley and Lie Nelson) is a thicker-than-stock 3/32, which may not close up the mouth enough. You might ask him for a cost for a 1/8 or even 5/32 blade. Chatter would certainly be a thing of the past! You might also look around for a blade from an Ohio Tool #03. They have thick, tapered blades, which would accomplish the same thing. I think I have both an Ohio and a Stanley #3, so if I remember when I get home tonight, I'll try swapping the blades and see if that is a realistic solution.

The other thought is to back the blade up with a spacer to move it forward. Kind of like a chip breaker on the "wrong" side. I've done essentially the same thing with a couple of spokeshaves using aluminum can material for the shim.

Re: What to do with #3

#5

Roughing or Loaner Plane

David Miller from Iowa

>I have a couple planes like that which I use for prep work. Since I use a lot of recycled and air dried (outdoors) wood, there is always paint and dirt on the wood and I just grab the "roughing" plane and take it down to bare wood. Funny that I tend to use these couple planes more than any single other plane I have.

Here is another take - since my neighbors all know I have a bunch of planes, I get 2-4 requests per year to borrow one. I also keep a couple "marginal" planes on hand - decently sharp but certainly expendable, and loan them out without hestation. You never know what they will be used for or when you will get them back, but I always have a net gain from this policy as I occasionally get the "since you were nice enough to loan me that plane here is a chest full of tools my uncle had in the back of his barn" thing.

Pay it forward....

David

Re: What to do with #3

#6

Re: What to do with #3

Todd Hughes

>Break it up and sell the parts on the ebay...you will make enough to buy a real nice No. 3 and have some left over. The wood is probably worth as much as a complete plane....

....Why waste time and trouble on a damaged plane when you can easly get a nice one? .....Todd