Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Handtool cabinet : Almost complete!

Posts

Handtool cabinet : Almost complete!

#1

Handtool cabinet : Almost complete!

Dominic Greco in Richboro PA

>Hello Everyone,

As you can see, I've made some progress on my tool cabinet project. Before I left for vacation I gave it several coats of wipe on poly. I sanded with steel wool between coats. I finished up with a coat of paste wax. Over the past week I managed to install the brass lock and strike plates, re-work the shelves so that they incorporate a strip of hickory along the back (to prevent sagging), install the french cleats, hang the cabinet (with the help of my neighbor because this darn thing is HEAVY!!), and install some indoor/outdoor carpet to project the planes.

After cutting up and installing the carpet, I moved some of my handplanes into their new home tonight. I still need to install the cleats for my large hand planes in the plane till area (to the left, behind the door). I also need to make hangers for my chisels and other tools that will be hung on the doors.

Photobucket

Here's a shot of the cabinet with me in the foreground. This'll give you an idea of it's size.

Photobucket

Here's a shot with the doors opened.

Photobucket

Here's a shot with the plane till door opened. The jury is still out on this door. I may end up removing it completely. That's not a problem since it pivots about a 1/4 dia pin. To remove it is a simple matter of lifting it out.

Photobucket

Here is a photos of some occupied plane cubbies. Third plane in from the left is my new Veritas Side Rabbit plane (Drive By Gloat!).

Photobucket

And here is a shot with the doors closed. The blue painter's tape was put there to protect the door from the light fixture. I just forgot to remove it! :>)

The prep for hanging the cabinet took the longest. I had to move everything out of that corner of the shop. Along with that I needed to move several of the light fixtures so that they would not interfere with the doors opening and closing. But what you see is not my shop's final configuration. Very soon I will be moving my shop around. My work bench will be located along an adjacent wall. In addition, the cabinet will be hung about 4" lower lower on the wall once I move the bench.I found that the current height makes getting to stuff on the top shelf problematic.

That's about it for now. Once I start installing the hangers for the various tools, I'll post more pics.

See ya around,

My Avatar


Dominic

Re: Handtool cabinet : Almost complete!

#2

Great job, Dominic, that's really nice looking.

Pam Niedermayer, Austin, TX

>

Re: Handtool cabinet : Almost complete!

#3

Re: Handtool cabinet : Almost complete!

wilbur

>Really nice work, Dominic, and the backward dovetails makes a nice design element. :@)

The cabinet is much bigger than I thought it would be based on your work-in-progress shots.

Re: Handtool cabinet : Almost complete!

#4

Re: Handtool cabinet : Almost complete!

Stephen Shepherd in the State of Deseret

>Dom,

Nice cabinet and like Wilbur said it is a lot bigger than I thought. But it looks like you are already running out of space for planes. You might be able to add small shelves and double up the block planes in their slots, just a thought.

I am still looking for the best way to store and have easy access to my chisels in my tool cabinet. How are you going to store yours?

Stephen

Re: Handtool cabinet : Almost complete!

#5

Re: Handtool cabinet : Almost complete!

Dominic Greco in Richboro PA

>Stephen,

Thanks for the compliments! To be truthful, I have about 6 planes I'll be selling stored in that cabinet. So that will free up some room.

As far as chisels go, I'm thinking about just a simple rack that they would slide into. Maybe a 1 1/2" wide x 12" long piece of wood with a circular cut out. Of course, I'd have a small ledge for the sharp edge to sit on.

See ya around,

Dominic

Re: Handtool cabinet : Almost complete!

#6

Re: Handtool cabinet : Almost complete!

Dominic Greco in Richboro PA

>Hi Wilbur,

Thanks for the compliments!

Yeah, I was told that by a number of people. Especially when my friend Gordon visited and commented on how much bigger it was than the pictures conveyed. So I figured I'd include a shot with my next to it to give people an idea on it's size.

Later,

Dominic

Re: Handtool cabinet : Almost complete!

#7

Thanks!

Dominic Greco in Richboro PA

>

Re: Handtool cabinet : Almost complete!

#8

Re: Handtool cabinet : Almost complete!

Hank Knight

>Hi Dom,

I agree completely with everyone else; that's a really nice tool cabinet. I like the fact that the depth of the main cabinet lets you store your long bench planes two deep on each shelf. I really like your materials selection and the wood nice grain, and your "design element" really sets off the drawers. I've been tinkering with tool cabinet designs for a long time. I hang lots of miscellaneous tools on the wall behind my bench and I can't seem to come up with a design that accommodates all of them. Your cabinet is an inspiration. Very nice work!

Hank

Re: Handtool cabinet : Almost complete!

#9

Re: Handtool cabinet : Almost complete!

Victor Parisian

>Nice job Dom. I've been watching your progress on this thinking that I'll be doing one of these soon. That smile on your face tells a lot. It made me smile right back.

Enjoy.

victor

Re: Handtool cabinet : Almost complete!

#10

Thanks Victor!

Dominic Greco in Richboro PA

>

Re: Handtool cabinet : Almost complete!

#11

Re: Handtool cabinet : Almost complete!

Dominic Greco in Richboro PA

>

Hank,

Thanks for the compliments!

You wrote:

"I like the fact that the depth of the main cabinet lets you store your long bench planes two deep on each shelf. "

Actually, I can store (most but the widest) planes THREE deep on each shelf. :>) When I was designing it, that was a key feature I wanted to include.

See ya around,

Dominic

Re: Handtool cabinet : Almost complete!

#12

Re: Handtool cabinet : Almost complete!

Hank Knight

>Dom,

Thanks for the great idea. That's going to help with some of my storage issues. I just have to measure to see if my space can handle a deep cabinet.

Hank

Re: Handtool cabinet : Almost complete!

#13

Re: Handtool cabinet : Almost complete!

Wiley Horne--So. Calif

>That's a great accomplishment, Dominic! Best thing about it is how well the drawers worked out. Also, all the repair/restoration work that you put into those planes becomes extremely impressive when you put them all together. Am sure you're feeling very virtuous--and you should!--having completed all this work.

Wiley

Re: Handtool cabinet : Almost complete!

#14

Re: Handtool cabinet : Almost complete!

Jim Shaver - Oakville, Ont

>Well done my friend,

That is a tight and well thought out project, nicely finished too!

Take care,

Jim

Re: Handtool cabinet : Almost complete!

#15

Re: Handtool cabinet : Almost complete!

Dominic in Buck's County PA

>Thanks Jim!

Re: Handtool cabinet : Almost complete!

#16

Thanks Wiley!

Dominic in Buck's County PA

>

Re: Handtool cabinet : Almost complete!

#17

Yea Dom!

Scott Burr in Ben Lomond, CA

>Looking very nice! What's going to happen to the inside the doors?

Looks like there's no spot for a 46...?!?

Please keep us posted as it filled!

Re: Handtool cabinet : Almost complete!

#18

Hi Scott!

Dominic in Buck's County PA

>Scott,

You wrote:

"What's going to happen to the inside the doors? Looks like there's no spot for a 46...?!?"

Don't worry buddy! I'm saving room at the top for the No46 as soon as it gets cleaned up. As far as the doors go, I'll be filling them up with tools as the days progress.

See ya around

Dominic

Re: Handtool cabinet : Almost complete!

#19

Beautiful Job, Dom!

Eddie Pacheco: San Jose, Ca,

>Man, that turned out nice. I have to say that the miscue with the drawer dovetails worked in your favor. They make a nice, perfectly aligned accent feature to the overall interior of the cabinet. Everything looks "dialed in" on it.

Re: Handtool cabinet : Almost complete!

#20

Re: Beautiful Job, Dom!

Dominic in Buck's County PA

>Thanks Eddie! I'm pretty happy with it as well (as you can tell from the cake eating grin on my face in photo #1!).

I really did mean for the dovetails to show up on the front. I wanted to carry over the design element of the dovetail splines in the carcass, the dovetailed door frames, and finally the drawers. What I didn't realize was that this would make them "backwords"! But I learned something from this project, and the IMHO drawers came out looking pretty cool.

See ya around,

Dominic

Re: Handtool cabinet : Almost complete!

#21

Ohhhhhh Yaaaaaaaaa!

Scott Burr in Ben Lomond, CA

>

Re: Handtool cabinet : Almost complete!

#22

My theory

wilbur

>Just thought I'd share my theory about the size of Dominic's tool cabinet.

The reason it's so big is that once he loads it up with planes, the combined mass will generate its own gravitational field, eventually pulling some poor little Stanley Bailey #1 into orbit around it, which will finally complete Dominic's collection.

Pretty clever of him, I think. :@)

Re: Handtool cabinet : Almost complete!

#23

Re: Handtool cabinet : Almost complete!

Charles

>Damn well done. Solid woodworking.