Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

Craftsman eggbeater drill

Posts

Craftsman eggbeater drill

#1

Craftsman eggbeater drill

Bill Houghton, Sebastopol, CA

>I bought this Craftsman eggbeater at an estate sale a few months back - 50 cents or so, as I recall. It's got an interesting - and, alas, all too typical of Sears - set of design tradeoffs. You can, I hope, see in this picture that the back handle is broken. Turned from some hardwood - birch or some such - with no ferrule, it's broken in multiple spots and falls off if you hold the drill with the handle down. I'm contemplating handle choices - leaning toward one of those file handles with the hardened threads built into the ferrule to thread onto the 3/8" stub just showing in the picture.

It's a pretty drill, with nice cast iron frame, long bearing surfaces.


img

Re: Craftsman eggbeater drill

#2

But on the other hand...

Bill Houghton, Sebastopol, CA

>the patternmaker, surely under direction, made this little cast iron fillip at the back side of the gearwheel. There's no idler gear. I think Sears was making a reference to the Millers Falls equalizer bearing, but there's no contact with the gear wheel - it's just a little piece of metal hanging out there, with no function whatsoever. Granted, cost of the extra cast iron is undoubtedly less than making a handle with a ferrule would have been. Still, they put attention where it didn't need to be, and ignored a rather obvious engineering problem.

Now, maybe I'm being unfair to Sears. This may have been the econo-model, with the better model being drilled for an equalizer gear. Somehow, though, I suspect they were just foolin'.

If it wasn't such a pretty little thing, I'd be tempted to take it in to Sears to see how they'd respond to my request to honor the lifetime warranty. Wandering OT...I recently took in a 1/4" drive ratchet, purchased at the same estate sale, from which the detent ball that holds the sockets on had escaped, so the sockets fell off, something I didn't notice when paying 50 cents for it (is there a theme here? Things falling off?). The sales guy, close to my age and clearly appreciating my chutzpah, gave me a top of the line Craftsman ratchet, retail $23, in its place.


img

Re: Craftsman eggbeater drill

#3

Is it beyond gluing back together?

cooper suter

>I've been turning more and more to epoxy for these sort of repairs.

By the way, anyone have to buy a can of West Systems recently?

WOW! The cost has really gone up the last couple of years.

Coop

Re: Craftsman eggbeater drill

#4

In my opinion, WAY beyond

Bill Houghton, Sebastopol, CA

>There's cracks running all the way up the handle, wood reamed out, etc. Too bad, it's a pretty handle, but I think I'd be investing time to no good purpose.

Wobbly handles suck an astonishing amount of useful work out of an eggbeater drill.

Re: Craftsman eggbeater drill

#5

Re: But on the other hand...

Marv....... Northern California Lake Co.

>Hi Bill,

Sears didn't make the drill, it was made by Millers Falls with the Craftsman name on it. Like with Winchester, Sears has never made any of the products they sell that I am aware of.

Fifty cents at an estate sale, puts you in the catagory of Todd's buying expertise....*grin*

I would attempt to repair the handle and retain it's originality. Not all of the drills that size had ferrules on the handle. If there had been one, that end of the handle would have been turned down to fit a ferrule.

Marv

Re: Craftsman eggbeater drill

#6

Re: Is it beyond gluing back together?

Marv....... Northern California Lake Co.

>Anything that smells of crude oil is going out of sight price-wise

Marv

Re: Craftsman eggbeater drill

#7

I guess I could give it a shot

Bill Houghton, Sebastopol, CA

>though I really dislike wobbly back handles. A lot of people rave about the Millers-Falls No. 2, but my 2 examples (one bought, one from my dad) both have wobbly back handles, and it's really hard to bore effectively with them because of lost motion. They do have ferrules, but very thin, with just one pin - and the wood's basically splintered away underneath.

On the other hand, my North Bros. drills and (current fave) my Stanley 610 are firm as can be. The Stanley, particularly, is interesting because they used a very long ferrule and cross-pinned it.

Somewhere on my mental to-do list, a year or two down the line, is tearing the back handle off the purchased M-F and seeing if I can remake it to be more rigid.

Having said all that, I must confess that I'm not as particular about burning cholesterol when boring holes, which are rarely visible in the finished product, and most of the holes are surrounded by a wasteland of dead electrons.

I guess the next fun question after 18th century plywood is what the 18th century tradesworkers would have made of a Makita cordless drill - if you stipulate some way to recharge it, replace batteries, etc.