Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Domed trunk, progress and questions

Posts

Domed trunk, progress and questions

#1

Domed trunk, progress and questions

Bill Tindall, E.TN

>I got the domed lid fit to its frame today and the secret compartments and till were done last week. Lid fitting was tedious but not as much as "bull nosing" the edges. I could plane the long grain edge with the molding plane shown. The end grain was done with the low angle spoke shave. I tried scraping the profile and found that oak end grain can not be scraped. With the hard and soft parts, scraping yielded a wash board. Remaining is to smooth the outside, turn the bun feet and install hinge.

What kind of hinge should I use? I was thinking a brass piano hinge from LV?

Also what kind of handle should I install for opening the lid? Something neat, but what?


img

Re: Domed trunk, progress and questions

#2

Looking good Bill!

Scott Burr in Ben Lomond, CA

>Nice edge treatment on the lid. I think I'd use the locking chest hinges for it (like on a toy chest). That way it won't slam shut. As far as a handle goes, I think that will depend on the finish for the trunk. Leather and brass would be kinda cool.

Re: Domed trunk, progress and questions

#3

Re: Domed trunk, progress and questions

Wiley Horne--So. Calif

>&Category

Bill,

That is really beautiful, and a piece that will last forever. Some hardware choices:

1. Hinges

2. Latch?

3. Latch chains or rods (to hold the open lid in position)

4. Lift handles?

5. Corner protectors or mouldings?

Some links to hardware:

http://www.vandykes.com/product/02010764/

http://www.whitechapel-ltd.com/Merchant2/merchant.mvc?Screen=CTGY_Code=wc_Code=02BOXhandle

http://www.londonderry-brasses.com/Pg500.html

It's really grand, Bill. I think some antiquey lift handles are in order, but don't recall if you are patterning after an historic example which would dictate the look..

Wiley

Re: Domed trunk, progress and questions

#4

Re: Domed trunk, progress and questions

John Stegall

>Maybe for a handle, something out of Krenov's repertoire. In one of his books he showed a silver chest that always caught my fancy with the handles...but it was flat and not curved.

John

Re: Domed trunk, progress and questions

#5

That top is so beautiful. Well done, Bill.

Pam Niedermayer, Austin, TX

>