Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

Uses of skew rabbets

Posts

Uses of skew rabbets

#1

Uses of skew rabbets

Bill Houghton, Sebastopol, CA

>With the impending offering of LV's skew rabbets, I'd like to inquire of this group about the optimum uses of skew rabbets vs. straight ones. I've got a 78, as well as shoulder planes, and am wondering how I'd fit the skews into my repertoire.

Re: Uses of skew rabbets

#2

Re: Uses of skew rabbets

steve mackay

>Got a 78 long ago and found more uses than I'd have thought for it. Scored a 289 cheap and refurbed it just for fun but then wound up useing it as much as the 78. Its the old saying . . . " I didn't miss it when I didn't have it but, since I have it . . ." A lot of those " I've got a tool for THAT ! " moments.

Re: Uses of skew rabbets

#3

Re: Uses of skew rabbets

MikeW

>Hi Bill,

Understand that I use a moving fillister, which is the wooden equivilent of the plane that LV is coming out with. Once I got one, my 78 sat unused and I eventually sold my 78. Aside from the cross-grain that it does wonderfully, the long-grain rebates simply are easier. The blade slices the wood with ease either direction of the grain.

Take care, Mike

Re: Uses of skew rabbets

#4

Re: Uses of skew rabbets

Dean J in MN

>I'll echo what MikeW said. Nicholson describes a fillister as having a skew blade "By this obliquity, the bottom of the rebate is cut smoother, particularly in a transverse direction to the fibres, or where the stuff is cross grained..."

Further, he notes that unfenced skewed rabbets are not for sinking a rabbet (as a fillister is) but rather to clean up an already sunk rabbet. This is a handy way to cut rabbets quickly, use a chisel to quickly rough out your rabbet, clean up with a skew. I do find use for non-skew rabbets for molding work, to clean up my stepped rabbets to the gauge line, as the skew rabbets like to travel toward the right and the steps are small enough that I sometimes lose control of the skew and it jumps the line. In addition, skew rabbets are "sided" whereas the straight rabbets can be used with either side up against the shoulder.

FWIW, I hated my metal fillister with a passion. It cloged like crazy. I'm very happy to have a woodie now.

-Dean

Re: Uses of skew rabbets

#5

Hi Bill...

Scott Burr in Ben Lomond, CA

>I have a few metal skew planes, and they have their place in the shop. My favorite skew is the #46 followed by the LN140's (L&R). The one thing I've found out is that skewed planes go one way. If you try to go in the opposite direction of the skew they tend to pull away from the work. It's a great marketing ploy to get you to by 2 planes, left and right.