Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Update.... :)

Posts

Update.... :)

#1

Update.... :)

Rob Lee

>Hi all �

Promised earlier (somewhere!) that I�d post a few pics of the skew planes, now that they�re in production�.

So� here they are�.!

Yep, It�s a skew (askew?)�

Shot from the rear�

Fence Detail�

Some Draft Detail

Where�s the mirror??

Gotta have a brass knob or two�

Blade side

Yup � it�s square and flat�

Cheers �

Rob

Re: Update.... :)

#2

Rob, you need a better camera

Stephen Shepherd in the State of Deseret

>

Re: Update.... :)

#3

;)

Rob Lee

>

Re: Update.... :)

#4

On a different note...

Brad in Ottawa

>In case anyone is looking for the side rabbet... it's now on the website!

Brad

PS - I'm fairly certain that the link is for the US pricing not Canadian.

Re: Update.... :)

#5

Re: On a different note...

Rob Lee

>Hi Brad -

Same price in both currencies....

Cheers -

Rob

Re: Update.... :)

#6

Re: On a different note... *LINK*

MikeW

>Hi Brad,

The link below will pull up the side rebates in whatever currency is your default--assuming a link hasn't changed your default.

This is something I really wish LV would place int he cokkie and *not* override it. I.e., not use it in the url.

Take care, Mike

PS, the offender is the c=2 in the url below. It is the US currency designation.

http://www.leevalley.com/wood/page.aspx?c=2&p=60012&cat=51&ap=1

So this url is independent of one's desired currency:

http://www.leevalley.com/wood/page.aspx?&p=60012&cat=51&ap=1

I usually copy links to the broswer's address bar and remove the currency designation if the link comes from out of the US.


Linky independent of one's currency

Re: Update.... :)

#7

O.K., I see the set screws....

Neal in San Jose

>But where are the wavey washers? And the magnets?

I put in an order on Moday; if this had been on the "new goodies list", I prolly would have added one to my order!

Re: Update.... :)

#8

Re: Update.... :)

Marc in Luxembourg

>I don't see any shavings, then it isn't a plane. Voil� :-D

Marc

Re: Update.... :)

#9

I agree...

Victor Parisian

>

Re: Update.... :)

#10

Re: Update.... :)

Marv....... Northern California Lake Co.

>Rob,

Thanks for the update, but pictures that aren't so close up would be much better for the viewer. I'd like to see more of the plane in each picture.

Thanks,

Marv

Re: Update.... :)

#11

I think that may have been Rob's point

Bill Houghton, Sebastopol, CA

>clever marketer that he is, he wants us all to haunt the LV website until they finally announce them.

And when will that be, Rob?

Any news on the replacement irons for Stanley-type 51/151 spokeshaves?

Re: Update.... :)

#12

Art like fan dancing...

JimReed @tallahassee

>tease, tease, and the tension just continues to build...

Re: Update.... :)

#13

Re: I think that may have been Rob's point

Rob Lee

>Hi Bill -

They're close too....

05P3159 2-1/8" A2 SPOKESHAVE BLA $18.50

05P3179 2-1/8" O1 SPOKESHAVE BLA $17.50

Will check tomorrow when I get in...

Cheers -

Rob

Re: Update.... :)

#14

I agree Bill...

Scott Burr in Ben Lomond, CA

>Doesn't such blatant advertisement violate the forums rules?

Re: Update.... :)

#15

Re: I agree Bill...

Dan Donaldson

>It may technically, however these releases are items that many here at Woodcentral are very interested in and Lee Valley is one of the larger supporters of Woodcentral in many ways. It has long been kind of a game between Rob and the different forums about teasers to new products in the pipeline.

Re: Update.... :)

#16

As I said... *LINK*

Rob Lee

>.. posted in response to a previous request.

Rob


Picture request

Re: Update.... :)

#17

Yes!

Wiley Horne--So. Calif

>Just to clarify.....Lee Valley/Veritas is a major advertiser and supporter of WoodCentral, and Rob is an all-around good guy as we all know, and Lee Valley's customer support is in the stratosphere. And so forth.

But that's not the point. The point is what Rob said--he is answering specific requests with information. Absolutely anyone and any vendor can do this.

Wiley,,,,as Moderator

Re: Update.... :)

#18

Closing my eyes till I get verification his knicke

Paul Kierstead

>

Re: Update.... :)

#19

rs are on...

Paul Kierstead

>

Re: Update.... :)

#20

Re: Update.... :)

kees------WebKitFormBoundaryOU9H+Iht917Killo------

>a new iphone?

Re: Update.... :)

#21

What a "welcome home" present!

Dominic Greco in Richboro PA

>

What a cool surprise!! I get back from vacation with the family and find that the LV side rabbit plane is now available! Guess whose placing their order soon? :>)

See ya around,

Dominic

Re: Update.... :)

#22

In words...

Marc in Luxembourg

>Let's see:

Bubinga handle soft shape; steep angle;

knicker (no brass screw) under the depth stop adjustable by a brass knob;

fence fixed by two rods (yeah) and brass collets;

no notch in the cast iron fence at the height of the blade, the fence is lower than the sole, therefore not wide, mh, then there are two holes for a wooden batten, one shown in the last picture; ;

skewed blade has a bevel on its side too;

four set screws;

lever cap fixed by a brass knob;

depth of iron adjusted by a brass knob, no Norris adjuster, conventional notch in the blade's face;

seven brass knobs, collets or screws in all, if there aren't two joined for fixing a wooden batten. Oh, I forgot the handle screw...

Yep I want one :-) When will it come out into the shops?

BTW Rob, there is no mirror involved in those pics, they are two planes showing each another side :-)

Marc ;-)

Re: Update.... :)

#23

Re: In words...

Ace Karner

>Which can only mean that there will be a left and right hand ver.

Re: Update.... :)

#24

Yep...

Marc in Luxembourg

>Yep and you will get four set screws only when you buy both planes, because one plane just has two screws. Mon Dieu.

Though why build a left and a right hand version? Does it exist any left hand version of Stanleys or Records or so? Is there a need?

Confused,

Marc ;-)

Re: Update.... :)

#25

Order placed!

Dominic Greco in Richboro PA

>Well I bit the bullet tonight and placed my order with LV. Now the wait begins.....!

Later,

Dominic