Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Dent in furniture

Posts

Dent in furniture

#1

Dent in furniture

John Hoffman

>Hi guys,

A guy at work bought an 18th century chest of drawers and when he got it home he noticed a dent in the side. The dent is approx 8 inches long and the width of the tip of a ball point pen.

Anyway, I was thinking that putting a damp cloth on the scratch and then a hot iron over the cloth might force the wood to absord moisture and recover?

Anyone have ideas on this please?

Thanks

John

Re: Dent in furniture

#2

That or a...

Scott Burr in Ben Lomond, CA

>Soldering iron. If it's the size of a ball point in width, I'd try the soldering iron method. Less chance of damage than using a steam iron.

I'd try a little spot at first to see that no damage to the finish is being done.

Or just leave it alone and call it patina...

Re: Dent in furniture

#3

Jim in Burlington Ont.

Give it back

Jim in Burlington On

>A little line in a piece from the 1700's is nothing to be worried about. Once you add water to old finishes they lift and or become cloudy then you have a big mess on your hands.

Re: Dent in furniture

#4

Re: Dent in furniture

Bill Tindall, E.TN

>Best to not mess with valuable antique pieces without seeking professional help. I would think the steam would destroy the finish in the area. And messing with the finish could lessen value of piece substantially.