Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Thickness of compass plane sole

Posts

Thickness of compass plane sole

#1

Thickness of compass plane sole

Bill Houghton, Sebastopol, CA

>John in New Mexico asked the thickness of a Stanley compass plane sole in a thread below (link to his question, below). I just measured the sole of my new-to-me Stanley, and the answer is "roughly 0.45", which is remarkably close, within a couple of thousandths, to a late model Disston saw I recently acquired for all of 50 cents."

So, if you were willing to deal with the linkages and all, you could make your own compass plane. Or, of course, you could haunt eBay.

Re: Thickness of compass plane sole

#3

0.45"?

Denis Ch�nard, Orl�ans, Ont.

>What is it made of to remain flexible? :-)

DC

Re: Thickness of compass plane sole

#4

Um, that would be the spaghetti plane

Bill Houghton, Sebastopol, CA

>but only the Al Dente signature model.

I'll eventually learn these decimal point things: 0.045".

The 0.45" Disston saw I bought is one of two examples an experimental saw, the other of which was later sold to Lee Valley; it's expected to influence a future April 1st tool.

Re: Thickness of compass plane sole

#5

Thanks Bill!

John in NM

>Now I just have to deal with my procrastination and all the stuff I haven't finished on the home building front ;)

I was thinking of making the kind of rounded caps out of rosewood and the sides out of some 3/16 brass plate. Kind of a crazy infill compass plane!

I betcha you meant 0.045" though ;)