Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Why you want saw teeth at the end of the blade

Posts

Why you want saw teeth at the end of the blade

#1

Why you want saw teeth at the end of the blade

Scott Burr in Ben Lomond, CA

>So you can saw things like this. Pretty much impossible to do with a saw that is toothless at the front of the blade.


img

Re: Why you want saw teeth at the end of the blade

#2

Ha Ha!

Bill Tindall, E.TN

>What are all those X marks?!? You don't forget which side of the line to saw........ ever?

(PS, you should see my pieces. After doing it once (oops, well maybe twice) there is no limit to the marks I make

Re: Why you want saw teeth at the end of the blade

#3

Re: Why you want saw teeth at the end of the blade

Dean J in MN

>Huh, I cut the half blind from the lip toward the center of the drawer, reverse of how you are cutting in the pic. You could get away with no teeth on the tip of the saw that way.

-Dean

Re: Why you want saw teeth at the end of the blade

#4

Re: Why you want saw teeth at the end of the blade

Paul Kierstead

>Well, ya know, it ok to own more then one saw. How many more? Well, uh ..

Re: Why you want saw teeth at the end of the blade

#5

Just what I was going to say

Bill Houghton, Sebastopol, CA

>spent a whole 50 cents on a late model Disston that I hardly need - think I'm up to 20 saws or so, which I know makes me a beginner.

Re: Why you want saw teeth at the end of the blade

#6

Re: Why you want saw teeth at the end of the blade

Marv....... Northern California Lake Co.

>Scott,

That saw looks a bit dull....

Doesn't everyone have more than one saw?

Marv

Re: Why you want saw teeth at the end of the blade

#7

Yep, I've cut enough

Scott Burr in Ben Lomond, CA

>Martian DT to have learned my lesson now.

Re: Why you want saw teeth at the end of the blade

#8

Yes, you could Dean...

Scott Burr in Ben Lomond, CA

>I find by doing them this way I can get a deeper cut with out over cutting into the drawer front. By the time I'm dome cutting this way the saw is almost vertical and there is very little to remove with a chisel or the tapping of the kinda dull scraper method.

Re: Why you want saw teeth at the end of the blade

#9

Yes it is...

Scott Burr in Ben Lomond, CA

>A bit dull Marv. Now that I'm done with the drawers, it's going to be taking a little time off and go a bit north of me for some R&R (rest and rehab). 8^)

Re: Why you want saw teeth at the end of the blade

#10

Re: Yes, you could Dean...

Dean J in MN

>Ah - I see.

I just overcut into the drawer fronts.

-Dean