Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

India Stones

Posts

India Stones

#1

India Stones

Doug Reynolds in Seattle

>I have some small round and square rod-shaped India stones, Norton brand perhaps, that look a lot like water stones instead of Arkansas. What should they be lubricated with when profiling molding plane blades or, used dry?

Re: India Stones

#2

Re: India Stones

Bill Houghton, Sebastopol, CA

>When I got an India stone some years back, if I recall correctly, the literature said to lube with oil; which is what I've done, and it's worked fine.

Re: India Stones

#3

Re: India Stones

Richard Jones

>I've always used mineral oil with mine, has worked fine for years. The only India stone that I still use is one that is the initial prep stone for doing 1911 triggers/sears/etc. Everything else is now water..............

Mineral oil also seems to clean up a lot easier than oil.

Rich

Re: India Stones

#4

Re: India Stones

Patrick Gibbons, Houston, TX

>India stones are impregnated with oil, Norton's own process I believe, and that's what one should stick with. Oil and water don't mix.

Re: India Stones

#5

Re: India Stones

Richard Jones

>I don't believe my India stone was impregnated with anything and it's had mineral oil on it for almost 11 years and umpteen 1911 trigger jobs.

Oil and water don't mix. Huh? I don't believe I said they did, did I?

Rich (now I'm really confused) in VA

Re: India Stones

#6

OT - oil and water

Bill Houghton, Sebastopol, CA

>Actually, they do. My dad had a 1947 Studebaker pickup at his gas station with a cracked block that was the dump-run truck. As a result of the cracked block, it had a revolutionary combined lubrication/cooling system. We'd just fill the bed with stuff and, once a month or so, check the oil and water, and fill whichever was low - which was kind of silly, since it was all one fluid, oil emulsified in water. Then we'd spend half an hour getting it running and head to the dump.

Wish I still had that. Beautiful truck. By now, it might need a new motor, though.

Re: India Stones

#7

converting India Stones to use water

Bob Demers

>You can convert an oil stone to use water as a lubricant (to flush away the swarf) by first cleaning it real good.

Run it through the dishwasher with some detergent, it will come out really clean and will now accept water readily....Only thing, is...you may want to try that when SWMBO is not around or ask her first :-) DAMHIKT

But why do that? (beside catching hell that is :-) because water is less messy than oil and work just fine.

The lubricant (oil or water) job is to help flush away swarf to prevent the stone from clogging.

It work, but no, I won't do it again :-)

Bob, who has been known to experiment around the kitchen

Re: India Stones

#8

Re: converting India Stones to use water

Richard Jones

>Ok, got it now. I don't use water with the India stone, just mineral oil. My comment was meant to convey that the India stone is the only stone I use now that isn't a water stone (OK, a few ceramics...). I understand that you can use water on them, but I've never had too much luck doing that. I do use water on the white and black ceramics.

Rich

Re: India Stones

#9

'72 Saab

John in New Mexico

>I had in HS had the same problem. First time I changed the oil I thought the previous owner had just never done it. Second time I figured out that something was "wrong"! Bad head gasket fortunately!

Oil coming out of the drain hole looked like a chocolate commercial.

Re: India Stones

#10

Re: '72 Saab

mike hamilton

>At least you didn't drain the transmission and add 4 quarts to the engine - a common occurance by the unitiated to the world of SAAB. My 72 was a v-4 95 and I wish I still had it (though my 9-3 would be jealous).

Regards,

Mike Hamilton(SAABs since '72)

Re: India Stones

#11

Re: '72 Saab

Joe Rogers, Northern Virginia

>My 62 had to have outboard oil added to the gas tank. Two stroke and all...waterpump was grafted onto the back of the generator. Strange beast that I couldn't kill.

JR

Re: India Stones

#12

Great cars

Bill Houghton, Sebastopol, CA

>We had one of about that era, too, and, yes, I wish I still had it. I remember when I finally figured out that it wasn't an awkward car to drive at all, if you drove it flat out at all times.