Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

Veritas Pullshave User? *LINK*

Posts

Veritas Pullshave User? *LINK*

#1

Veritas Pullshave User? *LINK*

Larry Gelder

>Anyone actually use the Veritas Pullshave? I'm making Windsor seat now and was wondering how good they really work. I'm currently using a scorp and cheap little brass spoon carving gouge.


Spoon Carving Gouge

Re: Veritas Pullshave User? *LINK*

#2

Re: Veritas Pullshave User?

David Miller from Iowa

>I got one of these when they first came out - can't remember, maybe 12 years ago?

It works great, with the usual caveat that you need to work on the cutter when it arrives and spend a while getting the depth of cut correct.

I actually got better results pushing it away (maybe the mechanics of my shaving horse?). Sort of awkward "pulling it away" - putting the spoon under the heel of my fist and pushing, but it did work better. I often thought, but never acted, on making the same thing with the blade reversed so one could lean into it and push.

David

Re: Veritas Pullshave User? *LINK*

#3

Re: Veritas Pullshave User?

Kevin Adams

>Larry--

The Veritas Pullshave is a very good tool and I'm quite sure you will like it better than the small brass shave you have been using. The blade is thicker and comes well prepared with a super flat back and only minor polishing needed (or not for that matter). The really neat thing about it is you can set it for an aggressive cut like a scorp and then tighten it up for smoothing cuts like a travisher. I find the blade to be much easier to sharpen than a scorp, too.

How about some photos of those Windsors?

Have fun!

Kevin

Re: Veritas Pullshave User? *LINK*

#4

The handle hardware is available!

Chuck Nickerson

>You can use it to remake the handles for pushing. I have the hardware but have not yet done the handle remake.

Re: Veritas Pullshave User? *LINK*

#5

I didn't like it much

Paul M.

>The San Diego Fine Woodworking Association puts on a show at the San Diego County Fair every year. We have a chair making booth to demo hand tool joinery for the fair attendees. They have several tools available for members to use when carving out the recess in chair seats.

One of these options is a LV Pullshave, and I gave that a try to see how that works compared to the travisher I usually use. I found it rather akward to use. I prefer using the travisher to remove the inshave marks over using this pullshave. I just feel I have more control using the wrist "flick" method with a travisher than the two handed pull you need to use with a pullshave.

If you have access to both an Inshave and Travisher, then the Inshave will take off material much faster than this pullshave, and the Travisher should produce a smoother surface than the pullshave, due to it's low-angle blade. So the pullshave seems like a tool between an inshave and a travisher, and I'm not certain there needs to be a tool between these two.

I'm just a casual once-a-year chair seat maker, so please take this simply as my non-expert opinion. ;-)

Re: Veritas Pullshave User? *LINK*

#6

Re: Veritas Pullshave User?

Larry Gelder

>I'll post some pics, maybe tomorrow. The whole chair is osage orange, for now. I've only got the seat nearly finished. Will be working on it Friday. The legs will be a snap, since I'm draw knifing them to an octagonal shape. The style is rustic windsor from Langsner's book.

Re: Veritas Pullshave User? *LINK*

#7

Re: Veritas Pullshave User?

Kevin Adams

>Larry, would love to see photos. What was the osage orange like to work, especially the seat carving? What inshave do you use now? I actually use my pullshave when I saddle hardwood seats as the blade is much easier to sharpen/hone than the inshave.

Thanks.

Kevin

Re: Veritas Pullshave User? *LINK*

#8

Re: Veritas Pullshave User?

Larry Gelder

>The wood is fairly green, so it's been easy to work with an adze, inshave, and travisher to shaping/saddle the seat. I drilled the holes through the seat and turned tenons on the legs yesterday. Hopefully today, I'm tapering the legs, then shaving them into octagons.

I'll try to get a few pics up later.

Re: Veritas Pullshave User? *LINK*

#9

Inshave

Larry Gelder

>My inshave is from Germany, which I bought from a guy at a MWTC gathering. I had to change the handle angles to avoid tearing up my knuckles. The bevel is on the outside, so it's easy to sharpen.

Re: Veritas Pullshave User? *LINK*

#10

Re: Veritas Pullshave User?

Larry Gelder

>Here's the seat blank


img

Re: Veritas Pullshave User? *LINK*

#11

Re: Veritas Pullshave User?

Kevin Adams

>Looking good, Larry! John Brown would be proud. Is the seat blank still on the green side or has it dried out? Just wondering how the legs will fit after everything dries, but I imagine it would just get tighter not looser. I would worry about splitting and warping though. Are the spindles going to be osage orange, too? That will be one special chair and I'd love to see more photos as you get it legged up.

Thanks.

Kevin

Re: Veritas Pullshave User? *LINK*

#12

More Info

Larry Gelder

>The seat is green (wet), and very yellow in color. I did octagonal-ize the tapered legs yesterday. Lots of tearout, which means I'll need to hit the facets with a scraper. I bought a Stanley #80 at an auction a while back, but haven't tuned it up yet. I have a light bulb kiln for drying ladderback rungs, so me thinks the osage legs will rest in the kiln til they're bone dry. Meanwhile, I'll tune up the #80 and scrape the legs after they're dry.

At this point, all they parts will be osage orange. The only part subject to change is the crest.

By the way, this tree became available to me and my WW buddies fro a severe spring storm. The storm knocked over an Oak tree, that crashed into and hung up in the Osage. The city tree cutter had to drop the osage to get to the Oak from overhanging the road. My buddies and I harvested the Osage before the City had a chance to cut it into manageable handling lengths. One of my buddies owns a rip-saw mill that slabs up to 14-in diameter logs. The Osage was about 10-12 inches in diameter. We slabbed enough osage for 2 chairs and a setee.

I'm mostly a Friday/Saturday WW, so my next workday is this coming Friday.