Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

D's DTs

Posts

D's DTs

#1

D's DTs

MikeW

>Apologies for the cross-posting. Don't know how many of y'all get around to other forums and I'm tickled about D's DTs...

************

Hey everyone. Not fully intending to embarass my wife, but I'm too proud not to post her first attempt at hand-cutting DTs.

Armed with this:


She took over my bench on Sunday and did this:


She got herself a tad confused in the marking of the tails and rather than erase the bogus marking lines, she used the smallest Sharpie on my bench and highlighted the proper knifed lines.

Snug, hand-tight and no gaps right from the saw--thanks for the book Rob (hey, a signed copy from his visit that he gave to my wife...meep meep).

The missus will do a couple more and then start on some boxes this coming weekend.

Take care, Mike

PS, this without my help except to gather the tools Rob mentioned from their ignoble location in boxes...

Re: D's DTs

#2

what is your address

Bill Tindall, E.TN

>I'll send the front trunk panel for her to practice on. Her's are better than mine

Re: D's DTs

#3

Re: D's DTs

Dean J in MN

>Fantastic! Let D know she can swing by -- I have a few more drawers to build to finish my chests!

-Dean

Re: D's DTs

#4

Sweet!

Scott Burr in Ben Lomond, CA

>In pine no less. She did a great job!

Re: D's DTs

#6

Re: D's DTs

Marc in Luxembourg

>Mike,

The way D's first dovetails turned out, she... no, you should took good care of her and invite her to a decent candle light dinner. But that, probably you already have made.

Never have seen that and so - stunning,

Marc

Re: D's DTs

#7

Re: D's DTs

Wiley Horne--So. Calif.

>Mike,

Those are dead solid perfect, all right. I seem to recall her turnings are stunning too--I didn't dream that, did I?

Big congratulations to D!!

Wiley

Re: D's DTs

#8

She's got the knack!!

Andrew Lunn

>

Re: D's DTs

#9

Re: D's DTs

MikeW

>Hey Wiley--fancy meeting you here!

Yep, she is a turner.

This is probably the most shown vase of hers. She doesn't like me taking pictures of her stuff, so this is about the only thing I have sneaked a picture of.


Well, and then there was a popourri container or two I took pictures of.


She is going to do a few more practice DT corners then tackle some thin Bubinga for a box or two.

Then what? I think it's a Jefferson lap desk repop. Don't ya just love fearlessness?

Take care, Mike

Re: D's DTs

#10

Tell her they look great!

Stephen Shepherd in the State of Deseret

>Now teach her how to gang saw the sides and the box will be done in no time.

Stephen

Re: D's DTs

#11

Re: D's DTs

Wiley Horne--So. Calif.

>Fearlessness. Hell yes. But. There's also confidence. She just knows she can do it. Once you get that feeling down in your bones, no limits. Course having a good saw helps. She has a saw, right?

Wiley

Re: D's DTs

#12

Re: D's DTs

MikeW

>Hi Wiley--yes and no.

She used a nearly 200 year DT saw that I own. She too is on the waiting list. Pathetic, isn't it?

Here's (and another couple people's) are going to be made from a wonderful block of curly Pink Ivory I have.


This is an older picture. I have since sawed this up in anticipation of the orders. Wonderful block of wood. Nearly 4" thick and 12" x 12" or so.

Take care, Mike

Re: D's DTs

#13

Re: Tell her they look great!

MikeW

>Hey Mr. S,

Yeah, the Bubinga boxes will have the tails sawn in pairs most likely. She's watched me do that and believes that she can do it, especially in the 3/8" Bubinga.

Fearlessness combined with, as Wiley wrote, confidence, and a bit of perspiration and progress is made.

Take care, Mike

Re: D's DTs

#14

Re: D's DTs

Stuart Hough

>Very nice work!