Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Kicking it Old School part 2

Posts

Kicking it Old School part 2

#1

Kicking it Old School part 2

ThomD

>I got my motising machine moved in and tried a few cuts with it. It's an interesting tool, in that the chisel goes deep in softwood, and repeated cuts are not required for full dept mortises. The machine doesn't have a lot features. Apparently my Grandfather's had all the modern positioning slides one finds on industrial mortisers.

I think I will learn a little about hand work from the machine since the best process is different from what I do with hand tools.

Sorry the picture isn't better. maybe when I get it stripped and painted.


img

Re: Kicking it Old School part 2

#2

Moses Yoder

Re: Kicking it Old School part 2

Moses Yoder

>I probably would make sure all the moving parts are oiled or greased and then leave it like it is; it's a beauty.

Re: Kicking it Old School part 2

#3

Re: Kicking it Old School part 2

Marv....... Northern California Lake Co.

>Hi Thom,

Love those old cast iron machines and tools. I've see some really nice restorations done on old machinery, like John Deere tractors for example. When the parts are disassembled and painted the restorations turn out beautiful. The best restorations is when the paint colors are the same or closest to the original.

Love to see pictures when you are done.

Marv

Re: Kicking it Old School part 2

#4

Naaaaa...

Scott Burr in Ben Lomond, CA

>I say paint it purple! Much nicer than John Deere green. 8^)

Re: Kicking it Old School part 2

#5

Re: Naaaaa...

ThomD

>Thanks all, I will grease, i's just plain bearings so it will need something.

Whether original or not the head of the machine has some gold pinstriping on raised parts of the metal. And there are some raised letters on the base that would comand a similar treatment. I'm not a serious restorer, but I will try to get it working and spruced up a little.

Re: Kicking it Old School part 2

#6

Foot Chopping Mortises

Stephen Shepherd in the State of Deseret

>Now unlike hand chopped mortises, it is a good idea to predrill when using the Foot powered machine. The machine holds the chisel just right every stomp, all you need to do is move the stuff and the mortise enlarges.

You will need to use a piece of scrap under the work to get a clean exit hole, or allow a little extra to plane off any tear outs. I would scribe the mortises on Both sides with a gauge and striking knife and that helps with splitting out on the off side.

Stephen

Re: Kicking it Old School part 2

#7

Re: Foot Chopping Mortises

ThomD

>I just don't think they did it that way... I'm working on starting out with light cuts, that seem to deepen despite my eforts, it ramps down and the chips come out, and then I do the 180 and before I know it, it's done. Not enough practice yet, to know for sure... And I will be gone from the shop for a month, wondering.

Re: Kicking it Old School part 2

#8

Re: Kicking it Old School - back

ThomD

>I knew I would take some serious hits from that pedal, walking aroung the shop. That's one thing about hand tools, I don't walk into them as I do the stationary ones. Still lots of ways to hurt oneself, if not while packing.