Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

ID of Japanese saw?

Posts

ID of Japanese saw?

#1

ID of Japanese saw?

Dave Mount

>I received a Japanese saw from the widow of a friend and woodworker that passed away. She believed it was a saw of note, but I don't have great confidence that she is parsing how much her husband liked it as opposed to its absolute quality. I know little about the fine points of Japanese saws, so I thought I'd see if anyone here could tell anything from the writings on the blade. Unfortunately, I'm so illiterate when it comes to Japanese language I'm not even sure which orientation to show the characters, so I guess I'll post it in more than one. Sorry I couldn't get any better focus than this.

Any info on the saw would be appreciated.

Best,

Dave


img

Re: ID of Japanese saw?

#2

Re: Rotated 180 degrees 

Dave Mount

>


img

Re: ID of Japanese saw?

#3

Re: entire saw

Dave Mount

>

Re: ID of Japanese saw?

#4

Re: entire saw 

Dave Mount

>


img

Re: ID of Japanese saw?

#5

Re: ID of Japanese saw?

Tony - Memphis

>A good buddy of mine is Japanese. I sent the pic to him to see if he can read it.

Re: ID of Japanese saw?

#6

Reply...

Tony - Memphis

>Here is what he said...

The upper 4 letters means "Trade Mark".

The lower vertical 4 letters is the name of a company or a person, Kikuba Monsaku. For a Japanese, family names are first if it is a name of a person. It looks like a fake name for a company.

Not sure what he means about the fake name thing...

Tony

Re: ID of Japanese saw?

#7

Re: Reply...

Pam Niedermayer, Austin, TX

>Monsaku could mean "work of Mon." Mon is probably a pseudonym, a professional trade name.

Pam

Re: ID of Japanese saw?

#8

Re: Thanks Tony, Pam

Dave Mount

>Thanks for your responses. I tried Googling all kinds of combinations of those words and dozuki, saw, etc. and couldn't dig anything up that made sense. Oh well, worth a try. Cuts nicely, regardless.

I learned to cut dovetails with a western saw, which probably explains why I don't (yet anyway) find it very appealing for dovetailing. However, I have taken to it for parting turnings -- easy to cut close to finished work and with the pull stroke and fine kerf, it is easy to make delicate cuts.

Best,

Dave

Re: ID of Japanese saw?

#9

Re: Thanks Tony, Pam

Wiley Horne--So. Calif.

>Hi Dave,

To be fair to the saw, it looks to be a crosscut dozuki. If so, it wouldn't be worth shucks for dovetailing anyway. How does it do on tenon shoulders?

Wiley

Re: ID of Japanese saw?

#10

Re: Thanks Tony, Pam

ThomD

>Nice chair.

"I learned to cut dovetails with a western saw, which probably explains why I don't (yet anyway) find it very appealing for dovetailing."

You do need a decent saw, I have both styles and mostly use my western dovetail saw because it cuts faster (also I got into the habit of saving my very best japanese saws for the finest work since they are fragile and harder to sharpen). Though there isn't much to it either way. I guess also the period where I really polished my skills was when the first good western saws came on offer, so it was something new to play with after 20 years with the pull saws. During seminars I would demo both saw types, and normally something hidious like a hack saw.

I have yet to see an article or video with a Japanese chraftsman cutting dovetails. According to "Tansu" they used the joint, and a few examples are shown. There may be much more work hiden under the iron straping they often used.

It all works one just has to practice the cuts.

One place where I prefer the wider cutting dovetail saw is in half blind joints where I got into the habit of using the spliting out technique Frid demonstrated. Works great in the medium hardwoods we get around here. Takes a strout blade in a fatter kerf to start the splits.