Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Who knows about rubberized wheel abrasives?

Posts

Who knows about rubberized wheel abrasives?

#1

Who knows about rubberized wheel abrasives?

Wiley Horne--So. Calif.

>rubberized abrasive wheels? Like that you use in a spinning handset.

Backstory: I broke down after 10 years and bought a new computer--the kind that writes WebKitFormBoundary all over my W/C posting attempts, but that's another story. Anyway, I'm now catching up on all the essential DVD's. Like for example, Larry Williams' and Don McConnell's.

In Larry's video on Making Side Escapement Planes, he shows some conical abrasive wheels that go into a handset and spin around. He said that even the 36g and 46g ones leave a high polish, if I understood him right. I was left with some questions. Like what's the prime mover for these wheels--do you buy a Dremel or a Foredom? What's best? What grits do the rubberized wheels come in? Do you apply fresh abrasive, or does the spent abrasive spall off? Do you renew the surface of the wheels on something, or do they self-renew by spalling?

Do the rubberized wheels take much material off? Apparently if you can take one to a moulding plane iron, they're not overly aggressive, but then Larry's got a great touch, which is apparent from watching him work.

Anyway, would appreciate whatever skinny you folks can offer about the rubberized wheels.

By the way, these two videos are gotta-haves in my opinion. The music is nice on them too. There's some wonderful picking happening on Don's video.

Thanks in advance....

Wiley

Re: Who knows about rubberized wheel abrasives?

#2

Re: Who knows about rubberized wheel abrasives?

Neal in San Jose

>I've used them in a Dremel tool to sharpen hollow chisel mortise chisels as well as a few molding planes. The ones I bought came from ebay, and are Cratex brand. I think I paid something like $10 for several lifetimes' worth in an assorment of five shapes and two colors (I assume two grits, more about that later). They don't wear out very quickly. If you Google Cratex, it will direct you to their home page - I didn't bother snooping around, but I bet you can get more info than you want there.

The ones I have are two different colors, a brick red and a green, and for the life of me, I can't tell any difference in the performance or results. They don't take much material off, and they do leave a very shiny surface. Usual caveats of shiney vs flat or sharp. In other words, you kinda need to know a little about sharpening. YMMV

Re: Who knows about rubberized wheel abrasives?

#3

Re: Who knows about rubberized wheel abrasives?

Hank Knight

>Wiley,

In a former life I was a manufacturing plant manager. Out mechanics used rubber abrasive wheels in Dremel tools all the time to take burrs off and leave a polished surface on small machine parts. My experience with them was 35 years ago. I haven't thought about them since and your post jogged my memory. IIRC, Dremel sells them as standard accessories for their machines. We used to order them by the case, but I don't recall where we bought them. I'll bet you can find them at most any place that carries Dremel tools. A also think there are probably many other sizes, shapes and grits available now days. I suggest looking for them at a jewelry supply house like Rio Grande.

My $.02.

Hank

Re: Who knows about rubberized wheel abrasives?

#4

Follow Up

Hank Knight

>Wiley,

I got home from work and looked up abraisive polishing wheels in my Rio Grande catalog (www.riogrande.com). There are many available there and I'm sure from other sources as well. Rio Grande has 5 or 6 different varieties, but all are basically an abrasive (usually silicon carbide) impregnated in a medium of some sort. The medium controls the rigidity, wear and flex of the polishing wheel. They are intended for use in a Foredom, Dremel or other such tool. They come in mounted (i.e., with an integrtated mandrel) or unmounted styles. There are mandrels sold for the unmounted ones. The mandrels are 3/32" in diameter with 1/8" screws to attach the abrasive wheel. The recommended speeds vary from 1K to 5K rpm up to 5K to 15K rpm depending on the type wheel, so the rpm output of your power supply is an important consideration in purchasing these things. They come in several basic shapes: Cylinder, Wheel, Knife Edge, , Pointed, and "Floppy Disc" and they come in 4 grits from course to very fine. Rio Grande sells several variety kits with a selection of wheels and grits with mandrels. Look inthe "Abrasives" section of their Tools and Equipment catalog.

I hate to refer you to Rio Grande because you have to set up an online access to browse their catalog. But I've had an account with them for years and, although I don't use it often, it comes in very handy for off the wall stuff like this. They are very nice people and easy to deal with, even for small orders.

I hope this helps.

Hank

Re: Who knows about rubberized wheel abrasives?

#5

Gobs of Cratex at..............

Richard Jones

>www.brownells.com

There is a big difference in the coarse and x-fine. I use the x-fine as

a finish wheel when fitting parts on 1911's, gives you a very nice polish...............

Rich (yeah, 1911 nut) in VA

Re: Who knows about rubberized wheel abrasives?

#6

In Don and Larry's class at MASW...

Ted Owen, Pittsburgh

>Larry uses a Foredom-type tool rather than Dremel. It's the Grizzly model, much less expensive than Foredom--MUCH less expensive. One reason to go with that bigger unit is so you can use wheels with 1/4" shank rather than 1/8", which I don't think the Dremel will accept. He runs them in a Foredom 44T handpiece, which fits the Grizzly just fine. I bought my handpiece from Foredom, but he said jeweler's supplies outfits sell them cheaper. The Foredom handpiece costs more from Foredom than the Grizzly spinny-thingie itself.

First do the grinding, getting close to a fluid-and-scribed mark that comes from your plane body. Then Larry begins the honing process with a cylindrical carborundum wheel, available at MSC or Enco, but also available for less $ at any auto parts store. This wheel is about 1-1/2" diameter and perhaps 1" high. Try to get to the scribed line as exactly as you can. Then comes the rubberized cone wheels, available at MSC, etc., and about 2" long, maybe a little less. Can get them singly or in sets. My set of 24 had two wheels missing, and MSC offered to replace the set or refund shipping. I took the shipping credit, because a set of 24 in various shapes will last 20 lifetimes, I'm guessing, plus I was too lazy to go through effort of sending the set back and waiting for replacement.

But that's not where Larry stops, you still go to the oil stones. He lubricates with WD-40 rather than oil. Says it's easier to clean up and cooler that way. IIRC, he uses only two stones--I forget the first one, probably medium, but the second is a black Arkansas. Both stones are trued on a diamond stone before EVERY use. Feel free to borrow his black Arkansas stone anytime and be rough with it if you don't value your life at all. : )

If I think of anything else, I'll let you know.

Best, Ted

Re: Who knows about rubberized wheel abrasives?

#7

Great Touch???

Larry Williams

>Whiley,

Great touch? If I can do this stuff, anyone can. When you see my hands shake in that DVD it's not because I was nervous. I've struggled with tremors in my hands for quite a while now. At the time that DVD was shot I was shaving with both hands on an electric razor and both elbows on the wall in an often fruitless effort to try to stay in control. I'm in my second week of using a medication for that now and it's working great, I'm no longer afraid of my hands when holding a chisel near my face.

I suggest a flex shaft grinder, like a Foredom, that takes 1/4" shank points. Grizzly sells one for around $50 that's not bad but it only takes 1/8" shank points. Hand pieces are sometimes interchangeable like on the Foredom grinders. The 1/4" shank hand piece from a Foredom will fig the Grizzly grinder but will run about the same price as the Grizzly grinder. That's the set up I used in the DVD -- a Grizzly grinder with a Foredom hand piece. For rubberized points I like MSC's house brand (labeled made in USA in their catalog). I think they run about $6 each and I find the hardness makes more difference than the grit. Get the softer ones. They might be labeled medium but they're the softest ones offered. Make sure and get some kind of diamond file to keep them dressed.

Re: Who knows about rubberized wheel abrasives?

#8

Yeah, great touch! I was

Wiley Horne--So. Calif.

>looking at the results. As soon as you had the tool in contact with the work, no problems. Thanks a lot for all the details. Everything is in the details, no matter the subject.

Wiley

Re: Who knows about rubberized wheel abrasives?

#9

Re: Larry's near miss.

ThomD

>Lee Valley used to sell them as replacement wheels for grinders. Cooler cutting, and finer finishing in the ones offered.

Funny about Larry's video. After it came out I saw this machine quite an expensive grinder originally in the tens of K, and it was for sale on ebay for under 1K, maybe 500. It was like a machinist's version of a spindle sander, came with all these accessory spindles with diamond or some effective abrassive. I saw it several times on ebay as the price fell. It was in Larry's general area. It was completely perfect for grinding hollows. I almost brought it to his attention, but then, people have their own ways of doing stuff...

Re: Who knows about rubberized wheel abrasives?

#10

WebKitFormBoundary tangent

wilbur

>Hi Wiley,

FYI, the WebKitFormBoundary bug is due to the WebBBS software that WoodCentral runs on not interacting with Safari well. There's a newer version that supposedly corrects this bug.

It's easy to get around, though. I always use "Preview" to check my posts before posting them. If the WebKitFormBoundary gibberish shows up, I just hit the "Back" button, and hit preview again. The gibberish will go away after 1-3 rounds of going back and previewing.

Sometimes I also get a message about my post needing to be approved by the moderator instead of being posted. Going back and trying to post the message again usually gets it through.

I have nothing useful to say about wheel abrasives.

Re: Who knows about rubberized wheel abrasives?

#11

Re: Gobs of Cratex at..............

Joe Rogers, Northern Virginia

>Well... I guess there are 2 of us in No. VA then:-)

JR

Re: Who knows about rubberized wheel abrasives?

#12

Re: Larry's near miss.

Larry Williams

>With a pending move, Larry isn't real interested in anything heavy. Now maybe if you can locate a levitation machine.....