Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Liquid hide glue - slow to dry - cross post

Posts

Liquid hide glue - slow to dry - cross post

#1

Liquid hide glue - slow to dry - cross post

Joe in a Cleveland suburb

>I posted this over in the regular message board and Mr. Tindall suggest I post my question here. Sorry for the cross post.

--------------------------------------------------------------

Hi.

I am making a small Shaker table for my daughter. It's basically the one that was in the (I think) first issue of PWW's Woodworking magazine. I'm using walnut.

Yesterday I glued up the top. I used some liquid hide glue I've had for some time now. I put a drop between my fingers and pulled it apart a couple times. It seemed to be okay - got strings between my fingers and it was pretty sticky. I recalled reading that tip someplace to test if the glue was still good.

I did the glue up yesterday morning. In the evening I went to scrape off the excess with a dull razor blade before it got too hard. It was softer than I thought it should be.

This morning I checked it and it still seems a bit soft. It's not hard. I can indent it with my finger nail.

Is this normal? It's is a bit humid/rainy here. Does this affect hide glue's drying ability? Should I wait a day or two before I remove the clamps? Did I just make some more firewood?

Thanks.

Joe

Re: Liquid hide glue - slow to dry - cross post

#2

Re: Liquid hide glue - slow to dry - cross post

Charles

>You're using the bottled stuff and it apparently has expired. The expiration date of the glue is printed on the bottle although it can be a little hard to decipher. These glues will fail if used past their expiration dates.

The glue will not achieve any appreciable strength and the part should be taken apart and reglued with fresh glue. You might consider this being a good time to go with a hot glue set up. The dried hide glue lasts indefinitely. You can mix up and heat only what you need on glue-up day.

Re: Liquid hide glue - slow to dry - cross post

#3

Re: Liquid hide glue - slow to dry - cross post

Joe in a Cleveland suburb

>Charles,

Does it sound to you then like it will never totally dry?

I suppose I can just rip this glue up right down the centers of the glue lines and re-glue.

Live and learn.

Thanks.

Re: Liquid hide glue - slow to dry - cross post

#4

Jim DeLaney, Austintown, Ohio

Re: Liquid hide glue - slow to dry - cross post

Jim DeLaney, Austintown, Ohio

>Joe,

Now that it's had another day to dry, it ought to be okay. Try stressing the joint a bit. I'm betting it's cured and will be stronger than the wood itself by now.

I've found that the squeeze-out from the liquid hide glue - I mostly use Old Brown Glue now, but have used Titebond in the past - stays sorta 'jelly-like' for quite a while, but the stuff in the joint is cured hard.

Jim D.

Re: Liquid hide glue - slow to dry - cross post

#5

Give it a couple of days if it is humid,

Stephen Shepherd in the State of Deseret

>if it passes the finger test it should be ok. I hardly ever have that problem but we hardly ever have humidity out here it is 10% as we speak.

Just be patient.

Stephen

Re: Liquid hide glue - slow to dry - cross post

#6

Re: Liquid hide glue - slow to dry - cross post

Charles

>It will never cure to strength. You need to start completely over or risk almost certain glue failure. Been there....

Re: Liquid hide glue - slow to dry - cross post

#7

Re: Liquid hide glue - slow to dry - cross post

Charles

>If you've been able to determine the expiration date on the glue, and the glue is outside that date, then there's no reason to wait for anything. It is NO GOOD after the expiration date. Period.