Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

Small Router Plane ID, & I found a brace (or 2)!

Posts

Small Router Plane ID, & I found a brace (or 2)!

#1

Small Router Plane ID, & I found a brace (or 2)!

Dominic Greco in Richboro PA

>Hi gang,

Today (6/29/08) I met Raney (from WoodNet, but also a regular here) at the Golden Nugget flea market in Lambertville NJ. besides getting the chance to finally meet up with him, Raney was kind enough to bring me a Stanley ratcheting Brace (No 945).

After meeting up we walked around and browsed some of the tables. While there I found ANOTHER ratcheting brace (I paid $5). I have no idea who made it. Maybe after I clean it up I'll be able to tell. (In the photo it's the dirty rusty one on the left)

Photobucket

Just before Raney arrived I was browsing the tables and happened across this gent who had boxes of mixed tools for sale. In one of the boxes I found this small router plane for $4.

Photobucket

Photobucket

Photobucket

It doesn't seem to have any markings. But I can't tell until I clean off the rust. What struck me as funny was the green oxidation that was present. Green is usually a sign of bronze/brass oxidation (copper oxide to be more specific). So I'm thinking this plane is brass or bronze.

The two small bolts rusted in place look like they were used in lieu of handles. I'm thinking of turning some small handles (perhaps out of ebony, bubinga or coccobolo). But I need to be careful of the size. If I make them too big they'll get in the way.

Anybody have a clue if this is from a know manufacturer? Did Stanley, Millers Falls, or Sargent make a bronze small router plane? If not, then I guess it might be a shop built one. Either way I'm going to clean it up and use it. I've been looking for one of these for a while now.

See ya around,

Dominic

Re: Small Router Plane ID, & I found a brace (or 2)!

#2

No idea of maker of router plane

Bill Houghton, Sebastopol, CA

>Cute little critter, though. I suspect the bolts held the original handles. Soak them liberally in your favorite skunk juice to loosen them, and consider re-using them if they're not dead when you're finished removing them.

The shape of the clamping bolt implies that the tool used cutters similar to the Stanley 71 shape - time to learn how to grind hex (allen) L-wrenches, methinks.

Re: Small Router Plane ID, & I found a brace (or 2)!

#3

Re: Small Router Plane ID, & I found a brace (or 2

paul womack

>How big is the router - there's no scale-item in the photo?

BugBear

Re: Small Router Plane ID, & I found a brace (or 2)!

#4

Re: Small Router Plane ID, & I found a brace (or 2

Bob Demers on vacation

>The brace chuck looks like Millers falls to me, you should see some markings on the chuck and on the brace metal frame.

As for the router, it look like a craftsman made (not Sears, but made by someone, probably a pattern maker) look like somewhat a copy of a Stanley, but they never made brass one as far as I know.

It also look a tad thick. The metal studs once hold wooden knobs. look at Stanley, Millers falss or Sargent and turned yourself some knobs in your favorite wood that you happen to have on hands.

It also look like it will accept standard Stanley router irons. LV sold them until recently and may still have some stock on hands, and I think their new router plane, or the LN one have irons that may match it? If not you can always use HEX key and grind them as suggested.

Enjoy it

Bob, enjoying the industrial fog in Hamilton. Hack hack...