Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Another "why did they stop making this?" tool

Posts

Another "why did they stop making this?" tool

#1

Another "why did they stop making this?" tool

Bill Houghton, Sebastopol, CA

>John Jesseph was recently kind enough to sell me a Kelly Tool Works cigar shave, part of tool simplification on his part. It solves precisely the problem I've had with my metal shaves (and that I'm not sure is easily solved with wood shaves, though that comment will probably start off a long thread...): shaving tight inside corners. This little critter will make clean end grain cuts on pine in a 1/2" radius corner. I was concerned that it would be hard to use - round-soled shaves are said to be hard to use, something I wouldn't know because my Kunz shave is so funky I've never been able to start using it - but it didn't take long to learn how to get a good cut going.

I mostly push my other metal shaves, but this one is clearly a pull shave.

Apparently, they're temporarily out of production, while Tim Kelly moves his shop, so I'm sure glad John was willing to part with his.

It's a little hard to store - you can't retract the blade - I think I'll find some large ID rubber hose and slit it to make a cover.

When I get past shop work in thirty or forty years (optimism at work there - I turn 60 this year), I hope I'm still coherent enough to write up notes so my kids/grandkids don't throw out tools, not knowing what they do...

Re: Another "why did they stop making this?" tool

#2

Sharpening cigar shaves

Bill Houghton, Sebastopol, CA

>Joel Moskowitz was kind enough to send me replacement sharpening instructions - I'm wondering if anyone else has any clever tricks for sharpening these little blades.

Re: Another "why did they stop making this?" tool

#3

Nice Bill, Do you have any...

Scott Burr in Ben Lomond, CA

>Tips on sharpening the blade? I've always struggled with mine old MF.

Re: Another "why did they stop making this?" tool

#4

Oops! Should have read this post first.

Scott Burr in Ben Lomond, CA

>

Re: Another "why did they stop making this?" tool

#5

Re: Another "why did they stop making this?" tool

Ron Knapp

>I'm not sure it's the same one you are looking at but Woodjoy tools sells a brass circular spokeshave that I own and it has proved to be a very useful one.

http://shop.woodjoytools.com/product.sc?productId=17&categoryId=6

http://shop.woodjoytools.com/images/1163341063402532833818.jpeg

Re: Another "why did they stop making this?" tool

#6

Kinda, but not Ron...

Scott Burr in Ben Lomond, CA

>The MF and clones we're talking about have a curved blade. Like a section of pipe with a sharpened edge. Your post is a very elegant approach to the matter that would alieve a lot of sharping whose.

Thanks for sharing your links!!!!

Re: Another "why did they stop making this?" tool

#7

A similar design

Bill Houghton, Sebastopol, CA

>As Scott says, the Millers Falls and Kelly Tool Works takeoff on it have a blade like a section of pipe. Although, on the Kelly design at least (never held a Millers Falls), the pipe is then ground off flat on its outer diameter before the cutting edge, resulting in a shape similar to the cutting iron of the Woodjoy shave to which you linked. The Woodjoy gives the impression of a Millers Falls shave designed by someone who had a stock of wood-bodied shave cutting irons to use up - not at all a bad design in itself, just a little different from the Millers Falls.

At any rate, I've been impressed by my limited use of it. Not the shave for everyday use, but just the ticket for tight inside curves.