Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Ryoba Advice

Posts

Ryoba Advice

#1

Ryoba Advice

Mark Kuzee

>Hey all,

I love my western saws but I find myself looking at Ryobas lately.

I have a few dozukis' but I would like to purchase a new Ryoba to try out.

This saw will be used on basically softwods/hardwoods (no exotics or plywood). I am a hobbiest and not a big user. I am looking for a good quality entry level saw. Price range $30-$60.

What length should I be looking for? I am leaning towards a long one for some reason. I have seen them in several lengths and tooth counts.

Any dealer/manufacture that stands out?

Thanks

Mark "sawnuts" Kuzee

Re: Ryoba Advice

#2

Re: Ryoba Advice

James Watriss

>I think for a good entry level saw, my fave is the fine or ultra fine Takumi saw from Woodcraft. They have other saws, which are nice enough, but that was the one that really kept me happy for a long time. Fine enough to to good dovetails, but sharp and fast enough for (relatively) quick rough cuts.

One thing I'll say.. it did take a little getting used to the progressive pitch of the rip teeth on Ryobas, but now that I'm used to it, I have a hard time getting used to the fine pitches on a lot of hte current western style dovetail saws. The one that made me the happiest is the progressive pitch from L-N... go figure, it cuts the most like the progressive teeth on the ryobas I'm used to.

Re: Ryoba Advice

#3

Re: Ryoba Advice

wilbur

>What length you are looking for depends on what sort of cuts you are planning to make with the saw. A 240 mm ryoba is good for most cuts in 4/4-8/4 stock. A 210 mm ryoba would be good for 1/2"-1" stock. Heavier cuts are best done with a 270 mm or larger saw. Unfortunately, most woodworking stores only seem to carry ryobas in the 240 mm size, which would be like only stocking a tenon saw if you were selling western saws.

A really nice entry level ryoba is the Gyokucho #611, available at the Japan Woodworker for $35.65. I have this saw, and use it a lot. The teeth on this saw are optimized for hardwoods, although it will cut softwoods very nicely as well.