Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Plane Making with Larry Williams

Posts

Plane Making with Larry Williams

#1

Plane Making with Larry Williams

Doug Reynolds in Seattle

>I have just returned from seven days a bliss in beautiful Indianapolis and the Marc Adams School of Woodworking. The class was making a pair of number 8 hollow and round molding planes which create a one inch diameter circle or, half inch radius curve. Larry Williams and Don McConnel of Clark and Williams Planemakers were the instructors. These are two very nice guys once you get past that gawd awful southern accent (just a little Yankee humor, no offense intended). We started Monday with a history of planes and their uses then went straight to work with two plane blanks of beech and two pieces of steel that became our planes and blades. At the end of the week we had a pair of fully finished (one coat of finish at least) working planes which we used over the weekend to make various moldings from poplar. The classes pretty much followed Larry and Don's videos with lots of demonstrations and personal assistance to ensure everyone's success.

The class looks forward to next year's Plane Making II class where we will make rabbet planes and snipes bill planes and, maybe a coffin smoother. Be sure to let Marc Adams know of your interest in attending these classes so we can get them on the schedule.

I would highly recommend taking classes with Larry and Don. Somehow a nice little 1 5/8" smoother found its way into my luggage for the flight home to Seattle. To quote Sgt Klink, "I know nothing!".

Re: Plane Making with Larry Williams

#2

Sounds like a great time Doug...

Scott Burr in Ben Lomond, CA

>Nice little summer vacation eh. How's about pic or two of your planes and the stowaway smoother?

Re: Plane Making with Larry Williams

#3

Re: Plane Making with Larry Williams

John Jesseph

>Thanks for the post! I just sent an email to Marc to encourage him to do that. Sounds like you had a good time--

Re: Plane Making with Larry Williams

#4

Re: Plane Making with Larry Williams

"RJ" Whelan

>Doug ... sounds like you had a great time.

I had the pleasure of working with Larry when be built a smoother for me about 8-9 year ago.

BTW: Klink was a colonel - Schultz was the sergeant

rj

Re: Plane Making with Larry Williams

#5

Doug, I didn't know you were there...

Ted Owen, Pittsburgh

>I was there for the weekend class and learned just what I was hoping--how to use the various shapes and how to sharpen. Larry and Don were terrific, and I highly recommend their classes.

Didn't know there was another use for a snipes bill besides making a quirk. Delighted to learn what a useful little bugger it is.

Next time maybe we should start a class by all introducing ourselves. : )

Best, Ted

Re: Plane Making with Larry Williams

#6

Re: Doug, I didn't know you were there...

Ace Karner

>Please expand on uses for snipes bill planes.

Re: Plane Making with Larry Williams

#7

Re: Doug, I didn't know you were there...

Ted Owen, Pittsburgh

>The big one is to start a rabbet quickly, much more quickly than setting up a batten board, and cleaner than just starting with moving filister--

With a marking gauge, score a line for the rabbet. Gently run a snipes bill down the score line; don't let the snipes bill leave the score line. Then make a second and third snipes bill pass with more normal force. Start the rabbet plane in the quirk made by the snipes bill, perhaps leaning the first stroke into the strike line.

Also cleans up a lot of other places where quirks or fillets meet the adjoining surfaces.

Best, Ted

Re: Plane Making with Larry Williams

#8

Re: Doug, I didn't know you were there...

Doug Reynolds in Seattle

>I was in the first row, second bench from the left. Tall, good looking fellow with a devilish Kirk Douglas cleft chin (really the fat, bald guy with the big grey moustache and glasses. Sorry, I forgot my Woodcentral gear at home.

Re: Plane Making with Larry Williams

#9

the snipes bills

Larry Williams

>Thanks Doug and Ted! Don and I had a great time too.

To expand some on what Ted has written, Don has deciphered part of a well-known 18th Century text. It explains an early technique of making cornice moldings that's direct, quick, easy and accurate while eliminating all the set-up usually associated with hollows and rounds. A DVD about making cornice moldings using this technique will be released soon.

The molding he shows is worked on the spring or where he can work plumb and level. While still in the square the secondary wood is glued on and the layout is done with the gage lines struck.




The back and top (plumb and level surfaces) are planed or cut to size. He uses the snipes bill planes to enter the rabbets that define the molding and guide the hollows and rounds.


Then finishes up all the necessary rabbets with straight rabbet planes.


Once the necessary rabbets are cut the majority of the work is done. Working with hollows and rounds is simply adding the final touches. This is the profile Don makes in the DVD:


This technique redefines gage lines. Rather than being guides to start close to then work to, they become the first and defining cut. I'm not sure what I'd have gone through to make a similar molding before Don figured out that early set of directions but it would have been an ordeal. Now it seems incredibly easy and such a common sense approach. The technique also explains a lot of old inventories and the way snipes bills are described in early texts. If only I'd have understood this approach 30 years ago. There are so many things I could have done.

I never cease to be amazed by the things Don finds hiding in plain sight.

Re: Plane Making with Larry Williams

#10

Re: Doug, I didn't know you were there...

Ted Owen, Pittsburgh

>Oh, so that was really you. I was too embarrassed to say hello to who I thought was Kirk Douglas.

I had my WoodCentral t-shirt on the first day. But I thought at the opening of the first class, we'd go around the room and introduce ourselves. Sorry I missed you.

Anyway, great class, huh?

Best, Ted

Re: Plane Making with Larry Williams

#11

See? I told you guys Larry and Don were great!!

Ted Owen, Pittsburgh

>

Re: Plane Making with Larry Williams

#12

Question for you, Larry

Ted Owen, Pittsburgh

>Where did you get your radius gauge set? The sets I see at MSC and elsewhere are in 1/64ths" and go up to around 1/2".

Best, Ted

Re: Plane Making with Larry Williams

#13

Re: the snipes bills

Victor Parisian

>Now that looks like some real good fun. Nice curlies. Nuk-nuk-nuk

victor in H&HH

Re: Plane Making with Larry Williams

#14

Re: the snipes bills

Dean J in MN

>Larry/Don --

Is the an interpretation of Sheraton's description of the method of gaging and working Cornices? I puzzled over the "...and, entering in by a snipes-bill, work down to ..."

(Pages 131-132 in the Dover reprint for anyone with the text)

Now it makes sense! Thanks Don!

-Dean

Re: Plane Making with Larry Williams

#15

McConnell is terrific

roninkokomo

>Don used to come over to the Hoosier Galoots gatherings in my shop. A wealth of information which he eagerly shares in a very humble way. Really a great guy and an excellent craftsman and teacher.

Re: Plane Making with Larry Williams

#16

Re: the snipes bills

MikeW

>Cool Don and Larry!

I never have used the snipe bills for this. Never would have occurred to me.

I look forward the the DVD. This is a much needed instruction in a hitherto ignored topic.

Take care, Mike

Re: Plane Making with Larry Williams

#17

WOW!

Scott Burr in Ben Lomond, CA

>Thanks for posting this Larry, very informative. Now you've done it, I need 2 more planes...

Re: Plane Making with Larry Williams

#18

Re: the snipes bills

Don McConnell

>Thought I'd take a few moments during a late lunch, after Bill, Larry and I have been wrestling some air dried beech from one location to another. The "glamor" side of plane making :-).

First, Ted, I want to apologize for not having people introduce themselves at the beginning of the class on making mouldings using H&R's, etc. Had intended to, but it slipped my mind in the heat of the moment. Will try not to make that mistake again.

And, Dean, yes, the information was hiding in Sheraton's section entitled "Of the method of gaging and working Cornices." It was only after the fact that I realized the title, itself, was an amazing clue - knowing to strike the critical gage lines at the opportune time is one of the keys to the entire thing. In addition, as Larry already mentioned, rediscovering this information also helped explain other early prominent mentions of snipe's bill planes.

I also want to point out that the "aha" moment came about only because Larry was willing to engage in a running discussion of possible readings of that text. Even at that, it might have remained an interesting, if off-the-wall, idea had we not had an appropriate pair of snipe's bill planes at hand. When Larry successfully tried the idea out (on the first attempt), we were both stunned by the ramifications and almost immediately began wondering how things might have been different had we known this 30 years ago.

One further point. The use of a snipe's bill plane to enter a gage line can prove useful in sticking virtually any kind of moulding. In other words, even in much simpler mouldings, the defining rabbets can be begun this same way - doing away with the use of a moving fillister plane, plough plane, or rabbet plane (with a batten or using your fingers as a fence) to begin the rabbet. A few strokes with the snipe's bill plane establishes the shoulder of the rabbet, which then can guide the rabbet plane in continuing to sink the rabbet.

Ron, I have fond memories of the get-togethers in Kokomo. A number of people generously helped me along my own path, and I'm always more than glad to attempt to give back while I still can. Besides, I learn a lot in the process. :-)

Don McConnell

Eureka Spring, AR

Re: Plane Making with Larry Williams

#19

Re: Question for you, Larry

Larry Williams

>Ted,

I have some radius gauges. They're pretty much what you describe but we didn't have them there. What we had were circle templates for drafting. I think I bought them at one of the office supply or art supply places. I'm not sure, it's been quite a while since I bought any.

Re: Plane Making with Larry Williams

#20

Thanks, Larry

Ted Owen, Pittsburgh

>Yes, they were on your video. Thanks.

Best, Ted

Re: Plane Making with Larry Williams

#21

Re: the snipes bills

Ace Karner

>Don, I have learned so much from your DVD on Traditional Molding Techniques, that I did in fact recently finish a wedding present on which I struck all the moldings with H&R's.

I look forward to your next one on cornice moldings and hope to see it advertised soon.

Re: Plane Making with Larry Williams

#22

Re: the snipes bills

Wiley Horne--So. Calif.

>Larry and Don,

Just want to add my congratulations to all the others, for this truly magnificent piece of research that Don McConnell has accomplished! Please let us know when there a release date on the new video has been set.

Thank you,

Wiley