Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

bi-weekly gloat

Posts

bi-weekly gloat

#1

bi-weekly gloat

cooper suter

>Hit a local auction today, my first in months, maybe a year.

Pattern shop.

I could make it a longer story, there is some background, but it's late, I'll cut to the list;

-four bench top metal benders

-a couple of lots made up of miscellaneous (clamps, large engineers squares, whitney punch, wrenches, etc.)

- a 16' ladder

-a lot of miscellaneous foundry tools including a couple gallon crucible and tongs

-a lot w/70 plus wood clamps, mostly 2' to 4' bar clamps and those big rapid adjust patternmakers c-clamps

-a crescent 36" bandsaw

-a Northfield 16"jointer

-a Northfield tablesaw

- a lot of 22 benches w/wood working vises

How much?

Well, before the buyers premium and taxes each bench cost me about as much as a gallon of diesel.

Everthing, w/premium and taxes included, was just slightly more than a tenth of the cost of a new Northfield jointer. You do the math.

Looking back, I should have bought more, it was one of those auctions.

Prices were erratic, but generally CHEAP!

Re: bi-weekly gloat

#2

Jeez, Coop

Bill Houghton, Sebastopol, CA

>Did you carry the Northfield gear out to the truck yourself like Todd carries his auction anvils?

I've been wishing for several years now that Northfield was an Oakland company (east of San Francisco, for those who don't know Bay Area geography), so I'd be able to find them around here and there.

Re: bi-weekly gloat

#3

bi-weekly ?!? Oh Coop....

Scott Burr in Ben Lomond, CA

>A Crescent 32" BS...


img

Re: bi-weekly gloat

#4

you beat me to it...

Victor Parisian

>

Re: bi-weekly gloat

#5

Nice haul.

Victor Parisian

>So are you selling benches now?

Victor

Re: bi-weekly gloat

#6

Re: bi-weekly gloat

Andy Lincoln,in Dearborn,MI

>Coop,

Should I stop in Toledo on my way back into Michigan on Friday to

pick up some new benches or wait and come down with a trailer and export some into MI?BTW how much does a 16" jointer weigh?

Andy

Re: bi-weekly gloat

#7

Ok...Ok

Joe Rogers, Northern Virginia

>I just want to know where you are storing the benches. TWENTY TWO ?

Re: bi-weekly gloat

#8

Re: bi-weekly ?!? Oh Coop....

cooper suter

>Well...., actually it's a 36" BS, so I guess I'm sucking on an extra 4",..... of girth that is.

Re: bi-weekly gloat

#9

Re: Nice haul.

cooper suter

>No, my intention is to set up all the benches for single operations.

One will have a scrub plane on it.

The next will have a jack.

The next will have a jointer.

The next will have a smoother.

One for shooting.

Add in all the above w/different grinds, cambers, mouth openings.

I'm hoping to set up seperately for iron vs. wood bodied planes, krenov styles, oriental style, horned Europeans style, etc.

One for cross cutting.

One for ripping.

A bench for chopping mortises.

A bench for plowing.

A bench for rabbetts.

A bench for dadoes.

A bench for brace drilling.

A bench for eggbeater drilling.

A bench for push drilling.

A bench for sharpening.

A couple for glue-ups.

Procede to some clamping and finishing benches.

A couple to pile stuff on.

Maybe one for small engine repair.

One for the kids.

Etc.

I'm just taking the rational others around here have used, (that owning all those piles of multiple planes, saws, chisels, drills, etc. is actually a plan for maximum efficiency), to it's maximum conclusion ;).

Really, I'm planning to set aside a few, and peddle off as many as possible as fast as possible, probably best to move that discussion to the classifieds though.

Keep in mind, these aren't pretty "coffee table book" type benches, these are used benches from a working shop.

Good basic benches for use; approx. 6' x 3', sheet metal legs (but heavier than current commercial legs I see), laminated front working surface (maybe 18"? deep), drop down tool tray in back, board back w/chisel/tool rack, 8" to 10" face vises at front left corner, drawer. There is a wide range of condition and empoyee customization present.

Probably circa 30's ( I talked w/a guy at the auction who'd apprenticed at this shop in the 50's, and the benches were already there then).

Coop

Re: bi-weekly gloat

#10

Re: bi-weekly gloat

cooper suter

>I'd wait,.... but not to long ;).

The jointer and the table saw both spec at 2000 lbs. on the Northfield site, having moved them before, I believe it.

The auctioneer is requiring a million dollar liability certificate to bring rigging machinery on site.

There are rigging contractors on site, but they want $100 per machine to bring them out of the building.

I'm probably going to have to get creative w/pinch bars and dollies.

There is a guy around who bought a lot of stuff including a fork truck. He unstacked some benches for me for a 12-pack (they were double and triple stacked), I might try him w/a case o'beer for the machinery.

Coop

Re: bi-weekly gloat

#11

Re: Ok...Ok

cooper suter

>Uh...actually more, the auctioneer wasn't real exact w/his count, and a few have drifted out of the corners, I'm over 25 and counting now.

They're going into a warehouse I rent, and into an extra booth at the antique mall I'm in.

I was going to post on the classifieds once I get a dozen priced and in the mall.

My cost per unit has crept up though, I've been throwing cash and donuts to the auctioneers runners who've helped me load ;).

Coop

Re: bi-weekly gloat

#12

Not carrying it far enough, Coop

Bill Houghton, Sebastopol, CA

>If you're serious about pushing this duplicate tool business to its logical end, Coop, you need separate buildings for each bench, each with lighting optimized for the process.

Re: bi-weekly gloat

#13

Re: Not carrying it far enough, Coop

KenI

>hmm... One craftsman per building per bench, skilled in each task... Opps. I think I went too far...

Ken