Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

Never seen one of these before

Posts

Never seen one of these before

#1

Never seen one of these before

Stephen Shepherd in the State of Deseret

>A friend of mine picked up this bit yesterday at a local swap meet. He was describing it to me and I couldn't believe his description. However when I saw the bit, his description was right.

It is marked FORSTNER and Conn. Valley and numbers looking like a date 15(?).32 and some other writting we could not make out. It is also marked 6 (6/16th) and is 3/8"

It does not have a center spur and looks like it never did.

Stephen


img

Re: Never seen one of these before

#2

Business end

Stephen Shepherd in the State of Deseret

>Here is the working end, no center spur, it has minor nicks but is in excellent condition.

Stephen


img

Re: Never seen one of these before

#3

Re: Business end

Hank Knight

>Stephen, I have one of those and mine doesn't have a spur either. I've often wondered it it was supposed to have one. Apparently not. Mine doesn't have the spiral shaft, just the forstner cutting head on a straight shaft. It works well in a brace.

Hank

Re: Never seen one of these before

#4

Re: Business end

Todd O. Cronkhite Maine Native, Presently Away

>I just never ceases to amaze me the variety of things that keep popping up in the old tool world! I also, as Hank said have some of the fostner bits that are where made for the brace, but none like this, nor have I ever seen one before.

So Stephen, how hard have you tried to acquire this little gem for your collection? ;~)

T.O.

Re: Never seen one of these before

#5

Re: Never seen one of these before

Brent Smith

>That bit was made by CONVALCO. They make Forstners without a center point.

Re: Never seen one of these before

#6

Yes

Stephen Shepherd in the State of Deseret

>Brent,

Thanks, I looked at it again an I can see the name now that you put all the letters together. It may say and Co. on the end, difficult to tell as the stamping is so small.

Stephen

Re: Never seen one of these before

#7

Re: Yes

Brent Smith

>THey still make bits today. They're sold by Morris tools http://www.morriswoodtool.com/Forstner-Bits-Multi-Spur-Boring-Bits.htm#Forstner%20Boring%20Bit,%20Style%2055