Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Stanley 12 1/2 Veneer Scraper

Posts

Stanley 12 1/2 Veneer Scraper

#1

Stanley 12 1/2 Veneer Scraper

Termite

>Hey guys,

I recently purchased this tool on e-bay and would like to know the history and how to use this tool.

I searched the forum without any luck so if this has been asked I do apologize.

The blade is convex which I suppose it is supposed to be. Does it still have a use today?

D. Campbell

Re: Stanley 12 1/2 Veneer Scraper

#2

Re: Stanley 12 1/2 Veneer Scraper

David Miller form Iowa

>These work great for general scraping. I�ve never done any veneering, but use these scrapers often. If you search the archive for scrapers you will probably find a lot of information on how to get the cutters just right � a little care on the cutter and you will never go back to sandpaper on hardwood. Welcome to the slippery slope!

Re: Stanley 12 1/2 Veneer Scraper

#3

Re: Stanley 12 1/2 Veneer Scraper

Termite

>I am hoping to get a little history on this type of scraper...What is the point of the Rosewood bottom vs the iron bottom of the No. 12.

I am guessing that the convex blade is similar to when you use a card scraper and you are bending the blade.

This scraper also has an angle adjustment.

D. Campbell

Re: Stanley 12 1/2 Veneer Scraper

#4

Re: Stanley 12 1/2 Veneer Scraper

Termite

>Hey guys,

I found what what I needed on Patrick's Blood&Gore.

A good explanation there.

Regards,

D. Campbell

Re: Stanley 12 1/2 Veneer Scraper

#5

Re: Stanley 12 1/2 Veneer Scraper *LINK*

Bob Demers

>Well I see you found the Patrick B&G site

http://www.supertool.com/StanleyBG/stan3.htm

Bookmark that site, that should always be your first reference when wanting to known anything on Stanley planes.

Here's some instruction that you would find in Tauton press, Working With Handplanes: The New Best Of Fine Woodworking

The link is a google's book search extract

Bob, who came out of the wood today, it was time for my annual requal on map reading and compass navigation, lots of fun. You would'nt believe how dense the forest is around here, you cannot see very far!!


Veener plane's instructions