Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Leak... *LINK*

Posts

Leak... *LINK*

#1

Leak... *LINK*

Rob Lee

>... since I posted it elsewhere...

... as promised in another thread...

Haven't set pricing yet - but it looks really good... :biggrin: (must be a mistake!)...

(no - Louis Garneau didn't help with the design either!)

Note that these are all pre-prod castings....

Cheers -

Rob


Side view

Re: Leak... *LINK*

#2

2nd shot...  *LINK*

Rob Lee

>


Front View

Re: Leak... *LINK*

#3

What is it? A bike helmet for Transformers? :-)

Denis Ch�nard, Orl�ans, Ont.

>How were the holidays?

DC

Sheesh... Three weeks... I'll never be able to take any for that long :-D

Re: Leak... *LINK*

#4

Re: or a stanley 79 from Pixar?

mike hamilton

>I like it a bunch!

Mike

Re: Leak... *LINK*

#5

Re: What is it? A bike helmet for Transformers? :-

Rob Lee

>Hi Denis -

Holidays were great... 'cept for the Diesel at $5.10 a gallon part...

Went to NC, KY, TN, AL, and NY.... and drove through a few other states...

Cheers -

Rob

Re: Leak... *LINK*

#6

Looks to me to be an adaption...

Scott Burr in Ben Lomond, CA

>Of a Preston or Record 2506(S) side rabate plane.

Re: Leak... *LINK*

#7

Side rebate a la Preston

Pam Niedermayer, Austin, TX

>I like this design a lot, Rob, very cool looking, love the rotating handle. Hope it's a lot less costly than the Prestons still out there I paid more than $225 for one a few years ago, kind of shocked me that I did that, turned around and sold it right away.

Pam

Re: Leak... *LINK*

#9

Re: or a Sargent 81

paul womack

>I'd always assumed the Sargent was a copy; I *know* the Record was a copy of the Preston. I don't know where the Sargent fits in the succession.

BugBear

Re: Leak... *LINK*

#10

Re: Side rebate a la Preston

Rob Lee

>Hi Pam -

Thanks for the kind comments - our designers have done a great job with this one.

Not exactly sure of the pricing yet, as we've only run 4 or 5, but it sure looks like it'll come in around $130 or so... thants only a tank or two of gas... :)

Cheers -

Rob

Re: Leak... *LINK*

#11

Re: or a Sargent 81 *LINK*

Bob Demers

>Well, the Sargent 81 is from William E Sparks July 1914 patent for a design of double cutters. It was manufactures 1913-1943.

E Preston started in 1825 until being sold to Record in 1932

I got a scan of a 1901 Edward Preston catalog, and the side rabbet plane does not show up in it. But I believed it does in the 1909 catalog (?)

Im guessing Preston came first, maybe not with the 2506 but with the general form of that tool

Joel posted a good history of the metal side rabbet planes in his permanent exhibits museum on his web site.

Bob


Preston side rabbet

Re: Leak... *LINK*

#12

Re: Side rebate a la Preston

Bob Demers

>Indeed Rob, its truly a great looking design, and one that would also work great im sure. Cant wait for it, I have long lusted the LN 98 99 pairs, but prefer this one by a mile.

Bob, whoes cost would be just about 2 tanks of gaz :-)

Re: Leak... *LINK*

#13

Sargent 81 patent *LINK*

Bob Demers

>That Sargent sure look a lot like the Record 2506 which was itself a simplified version of the Preston 1369 with no adjuster.

Reading the US patent claim, it almost sound like Spark came up with the general design idea, but its clear the Preston 1369 precedes it, and it was itself patented. Mind you, altought the Preston design retains the cross blades design, but with a funky adjuster, this Sargent and the subsequent Record 2506, both exhibit a cleaner more practical form.

Im sure the LV designers are more familiar with the numerous patents and forms of this class of tools than I am, i'd love to hear from them

Bob, who never cease to be amazed by LV tool's design


Sargent 81 patent

Re: Leak... *LINK*

#14

TN?

Tony - Memphis

>What part of TN did you visit? If I had known and you made it to our end of the state, I'd have offered a good BBQ meal at one of our local "joints." Hope you enjoyed your visit. NC is a great place to visit too (I'm a Tarheel by birth).

Tony

Re: Leak... *LINK*

#15

Re: TN?

Rob Lee

>Hi Tony -

Spent 3 days in Sevierville, and another 3 in Nashville... then drove the Natchez Trace Pkwy down to Red Bay Alabama. Then straight up to Louisville KY.

Memphis is next time!

Cheers -

Rob

Re: Leak... *LINK*

#16

should have stopped.....

Bill Tindall, E.TN

>I live just up the road from Sevierville, a place I would have warned you to avoid except on cold rainy days in February when there aren't traffic jams of tourists. You probably passed within 1/4 mile of Fred Stanley, a famous proponent of your bevel up planes. But then that stop would have been a postman's holiday.

Re: Leak... *LINK*

#17

Some teasing here...

Bill Houghton, Sebastopol, CA

>OK, it looks like you've got the knob from the shoulder plane, and what appear to be set screws flanking the screw that holds the front piece on. Surely you found somewhere to put a wavy washer?

As always, LV rethinks the tool rather than just copying old designs. I've got Stanley 98/99s, which will probably satisfy my need for this tool type for life, but, if I didn't, I suspect this would go on my want list.

Re: Leak... *LINK*

#18

Re: Side rebate a la Preston

Pam Niedermayer, Austin, TX

>Sounds like a good price; although $130 worth of gas would last us 3 or 4 months. :) Look forward to it.

Thanks,

Pam

PS Good to hear you like traveling by RV and that you had a good road trip. If you'd waited a couple of months you may have had the roads all to yourselves.

Re: Leak... *LINK*

#19

Re: Leak...

Joe Rogers, Northern Virginia

>I like it!

JR

Re: Leak... *LINK*

#20

$5.10 a gallon???

Denis Ch�nard, Orl�ans, Ont.

>Imperial or US? Aye Caramba...

Can't wait to get my hands on that little plane... When are they for sale?

Take care,

DC

Re: Leak... *LINK*

#21

Re: TN?

Tony - Memphis

>That's a beautiful part of the state (Lonnie Bird's school is up there). There is a pretty decent mini-brewery up there close the stretch of outlet malls,as I recall! Nashville is a nice city too. We've done a lot of weekend trips up there. A couple of years ago, the Williamsburg Exhibit of Southern Furniture was at Cheekwood (House/Museum/Gardens) in Nashville. That was a rare treat for this part of the country. The Frist Center has a lot of nice pieces of TN furniture. The trace is really nice. We've been threatening to drive it, but haven't gotten around to it. Glad you had a nice trip.

Come to think of it, while you were "in them parts," you should have stopped and talked to the Lodge cast iron folks and put together a sand shading kit using their small frying pans!

Tony

Re: Leak... *LINK*

#22

Re: Some teasing here...

Rob Lee

>Hi Bill -

Astute comments... there's at least one wavy washer.... ;)

Cheers -

Rob

Re: Leak... *LINK*

#23

Re: should have stopped.....

Rob Lee

>Hi Bill -

Won't be our last time in area... mind you, I could've done without the cicadas at their peak...

Was on the other side of the park, and went through Biltmore as well...

Cheers -

Rob

Re: Leak... *LINK*

#24

Wavy washer location...

Bob Demers

>If you look closely at the 'frontal' picture, its under the cutter adj clamp holder screw

Bob :-)

Re: Leak... *LINK*

#25

Oh, and where are the rare earth magnets?

Bill Houghton, Sebastopol, CA

>