Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

yet more trunk questions

Posts

yet more trunk questions

#1

yet more trunk questions

Bill Tindall, E.TN

>Consulting my limited library I find that what I am going to make is called a "domed trunk" . They seem to be something from the early 18th century. There are pictures of some examples in Pain, The Heritage of Upper Canadian Furniture, however none of the pictures shows detail of the joinery for the curved lid.

Should someone encounter one of these where a picture could be taken I would be most grateful to have a picture showing detail of a front corner showing how the dome, lid sides and trunk sides come together.

Lacking guidance from an original I am going to assume the sides of the lid are dovetailed like the trunk body. How the dome attaches to the lid sides is unclear. I could go rustic and nail it on with attractive-headed nails.

Re: yet more trunk questions

#2

A few questions for you...

James Watriss

>Is this something that's going to be made to move around, like a traveling trunk, or is this more for furniture, like a chest?

Is this going to be solid wood with a nice finish, or are you going to sheathe it in something like leather?

Is it going to be domed front to back, or are you going to go whole hog, and dome it front to back and side to side?

I looked briefly for more descriptions of your project, but aside from the bit about how the lid seats on the bottom, I didn't find much.

Re: yet more trunk questions

#3

answers

Bill Tindall, E.TN

>It will in fact be a toy chest about 28" long and about 18" high and deep, just now sketching our proportions. I am getting wood sorted as we speak. Well actually not exactly as we speak as I am inside cooling off from the recored heat we are having. I am thinking solid oak board for main dovetailed body and I have some nice close grain rift cut to make the coopered domed top. Finish will be clear and something durable.

The lid will curve front to back only, with a 1 7/8" rise over 18" of trunk depth. I learned how to make the dome at SAPFM meeting last year with Will Neptune, but how how to incorporate the dome into a lid remains to be determined.

There are two decisions that I am unsure of. One I have already mentioned, do I need some sort of aligning feature for lid to main body. I liked the idea of Warren as a solution.

The second is how to construct the domed lid. I have in mind something akin to a "house" where the lid would have sides about 2" high front and back and a "gable" end matching the curve of the dome. I am considering dovetailing the front and back to the gabled ends. The domed "roof" would then sit on this assembly to make the lid which would be hinged as usual onto the trunk body. I am flummoxed as to how to attach the domed "roof" and what sort of joinery where the "roof meets the sides of the lid. .


img

Re: yet more trunk questions

#4

Re: That should work...

Glenn Madsen, SF Bay Area

>I'm assuming you saw how Nahm did his a few seasons back? In a rabbet in the end caps?

Since this is a toy chest, you will want to make certain there are ventilation holes for when the lil rascals hide in there. Right? They can be subtle, but need to be effective.

(Grandfather to 4.8 grandchildren...)

Re: yet more trunk questions

#5

Re: yet more trunk questions

Stephen Shepherd in the State of Deseret

>Bill,

This is a Hudson's Bay Fur Company Cassette from the early nineteenth century in the Museum of the Fur Trad in Chadron Nebraska. It has a three piece lid and the wood on the two outside pieces are oriented to 'warp' or straighten out to fit the curve. The top is nailed on.

Stephen


img

Re: yet more trunk questions

#6

Spot on....

Bill Tindall, E.TN

>as my English friend would say. Now I even have a colorful name for the chest. I was thinking I would do a coppered dome but now I am wondering if the gentle curve of the top could be accommodated just like in your picture. I for sure can try it.

I was not familiar with the museum. I have driven by there numerous times with out stopping.I found the trapper museum (Fort William) at Thunder Bay fascinating and don't miss a chance to visit it.

Do you recall its approximate size? What wood it was made from?

Re: yet more trunk questions

#7

Re: Spot on.... *LINK*

Stephen Shepherd in the State of Deseret

>Bill,

It is a great museum if you ever get a chance stop by. Here is a link to an article on my web site about the Cassette. It has got the measurements of the originals.

Stephen


Hudson's Bay Company Cassette

Re: yet more trunk questions

#8

Like a table top

Alex Yeilding

>Assuimng your coopered top is solid, with no ship laps or other methods of accommodating movement, attaching it to the body of the top looks very much like attaching a solid table top to the rails of its base. Thinking on those lines, I would firmly glue the front of the top to the front panel (end-grain to end-grain, inline) and attach the sides with any of the devices that would allow side-to-side wood movement as in the end of a table top -- metal clips in slots, wooden blocks with tongues going into slots, figure-eight washers (not sure of the name of these), etc. The back attachments would be like you use on the sides of a table, allowing "in and out" movement of the top.

With all the movment of the top occurring at the back edge, you would hope to anticipantemovement that would not open a gop during the dry season, but won't cause the top to stick out too far in the back in the wet season.