Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

Can you post some pictures of your OWTs please.

Posts

Can you post some pictures of your OWTs please.

#1

Can you post some pictures of your OWTs please.

Derek Cohen (in Perth, Australia)

>I am looking for pictures of shopmade Old Woman's Tooth (wooden) router planes (Yeah I realise the name is politically incorrect!). Would you post your pics here - or pics of the ones that you like.

Many thanks.

Regards from Perth

Derek (planning to make one this weekend)

Re: Can you post some pictures of your OWTs please.

#2

Re: Can you post some pictures of your OWTs please

MikeW

>Hey Derek, howzit?

Here's the eBay photo of one I bought a couple years ago. Blade clamp is crap and haven't gotten around to changing it. I can take a better photo or two for you if needed this weekend.


The shape was what caught my eye. Kind of think the bugger is cute. Blade clamp, as can be seen, holds the cutter at an angle, though far less than in this photo after I tweaked it. Still works on wider grooves, though. I plan on making a better clamping system and swap in my LV blades one of these days.

Take care, Mike

Re: Can you post some pictures of your OWTs please.

#3

Re: Can you post some pictures of your OWTs please

Alex Yeilding

>It ain't pretty, but it does the job. Blade holder is eye-bolt that pulls the "iron" (Allen wrench) against the "bed".


img

Re: Can you post some pictures of your OWTs please.

#4

There is one on eBay... *LINK*

David Miller from Iowa

>On the right hand side of the picture in this lot. Bargain too - only $56 per tool, including the auger bits.


Overpriced eBay lot

Re: Can you post some pictures of your OWTs please.

#5

There was an article in Pop Wood

Denis Ch�nard, Orl�ans, Ont.

>... a while ago, on how to make one, it looked like the ECE model (that's still made AFAIK).

DC

Re: Can you post some pictures of your OWTs please.

#6

Re: Can you post some pictures of your OWTs please *LINK*

Pedder Broockmann

>Hi Derek,

look there's a nice small one from Alex with german describtion. 4 pics, so more than 4k words :o)

Kind regards Pedder


German Forum

Re: Can you post some pictures of your OWTs please.

#7

Oh I don't know...

Scott Burr in Ben Lomond, CA

>Looks nice to me!

Re: Can you post some pictures of your OWTs please.

#8

Re: Can you post some pictures of your OWTs please

Derek Cohen (in Perth, Australia)

>Hi Pedder

Thanks for that link. That is very similar to the design I have in mind. It helps greatly.

Regards from Perth

Derek

Re: Can you post some pictures of your OWTs please.

#9

Old Hag

Stephen Shepherd in the State of Deseret

>This is one of two old English Old Woman's Tooth planes I have. This one is toothless (no blade).

Stephen


img

Re: Can you post some pictures of your OWTs please.

#10

Another OWT

Stephen Shepherd in the State of Deseret

>This has a small blade but it does have nice handles. I use this one on occasion.

Stephen


img

Re: Can you post some pictures of your OWTs please.

#11

My Hor-la-toot

Stephen Shepherd in the State of Deseret

>This is my Old Woman's Tooth, I do use this plane, but I have router planes that I use more often. The blade is from a broken solid steel chisel blade, the part withouth the socket.

Stephen


img

Re: Can you post some pictures of your OWTs please.

#12

Scott, nice to see your name on a post

Bill Houghton, Sebastopol, CA

>I hope this means that Ben Lomond is safe from the fire. It sounded pretty bad in this morning's paper.

Re: Can you post some pictures of your OWTs please.

#13

Looks a lot like the ECE

Denis Ch�nard, Orl�ans, Ont.

>

Re: Can you post some pictures of your OWTs please.

#14

I've been around... Kinda... *LINK*

Scott Burr in Ben Lomond, CA

>Thanks for you concern!


Two days ago...