Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

A little gloat for old times sake.------WebKitForm

Posts

A little gloat for old times sake.------WebKitForm

#1

A little gloat for old times sake.------WebKitForm

cooper suter------WebKitFormBoundaryimtXPF8F+KDxdj

>I'm must be having Badger Pond pangs, so for old times sake, I thought I'd throw in a gloat to mix things up.

I really don't chase stuff like I used to (lack of time, dissipation of the jones, house I've been meaning to paint for ten years, etc.), but I still get residual calls about tools, and I still get stuff.

I got a call this Saturday morning around 8:00 from a woman about her uncles tools.

Turns out a liquidator was coming to look at the entire estate at 10:00 AM, I scheduled a 9:30 AM appointment.

No, I didn't get my center wheel.

The uncle had been in his seventies, civil engineer who took up woodworking in his later years, mostly newer stuff bought new over the last 20 years.

The only old tool was a nice clean MF's #18, but there was a nice quantity of good contemperary user stuff.

So what did I get?

Stuff.

A pile of clamps; pipe, bar, c's, hold downs, etc.

A box full of smaller power tools including a Makita sharpener, a power planer, and an Elu 1/2" router.

A lot of misc. accesories, router bits, counter sinks, doweling jigs, etc.

A set of 750's.

A set of MF carving tools.

A generic but decent looking roll of German gouges (Froo ?)

The basic around the house stuff,mostly craftsman, ratchets, socket, wrenches, screwdrivers, etc.

A lot of sharpening supplies, slipstones, bench stones, a Norton Tri-stone, etc.

A couple of banana boxes of old FWW's, 70's and 80's.

A good pile of books including all of Tage Frids, a Krenov, etc.

Maybe a hundred BF of wood, walnut, cherry, oak.

Some Starrett squares.

A lion mitre trimmer.

A work bench w/a face and end vise, OK to look at, kinda heavy but still wiggly.

A Paramo #4 w/a Hock blade.

A Stanley #78 (made in England).

The previously mentioned MF #18.

A Stanley #10 1/2 (England again).

Record #073.

Clifton #410

LN #62 w/an extra blade.

Much misc., hardware, sandpaper, glue, etc. About a half dozen banana boxes full.

Had to get Jim Crammond and another friend to help w/the bench.

Jim bought an old Craftsman buffing arbor (I gave him back the hard and medium wheels that I'd already taken off it ;) ).

The other guy bought a good quality old Craftsman compressor.

I ended up giving Jim the wood cause I didn't feel like schlepping it.

How much?

More than a house payment, but likely less than this weeks trip to the MWTCA national in Erie will be. (Actually, I remember a bar bill from the Akron MWTCA that was more than these tools, but we split that three ways;) )

Knowing the good from the common and being well aware of how an estate liquidator would price (while still charging 30% commission), it was pretty easy to offer on the tools (just took some time to get through them all).

In the end, no steals, just fair money minus no commission for ALL the hand tools, I'm confident the estate got more from me than they'd have gotten from a tag sale.

Coop.

------WebKitFormBoundaryimtXPF8F+KDxdjbD

------WebKitFormBoundaryWDFJKsFPJzVzy+YA

Re: A little gloat for old times sake.------WebKitForm

#2

Where'd the "WebKit" tag come from?

Cooper Suter

>

Re: A little gloat for old times sake.------WebKitForm

#3

Giant sucking sounds coming from Toledo

Bill Houghton, Sebastopol, CA

>Coop - did you HAVE to do that to those of us who are thrilled to find a General scratch awl, one of the three remaining 1/2" drive eight-point sockets on my list, a spring clamp, and a turned out to be bent Jorgensen pipe clamp for $3? Did you have to?

Re: A little gloat for old times sake.------WebKitForm

#4

Re: A little gloat for old times sake.

Jim Crammond in Monroe, Mi

>Coop,

I made a conservative estimate on the amount of wood, 20 BF oak, 20 BF cherry and 30 BF walnut. I didn't count the cut offs or narrow pieces. And this doesn't take into account the pine, cabinet grade plywood or piece of ash. Thanks. Other than the strain of helping get the workbench out of the basement it was well worth while. I did manage to get it home with just a couple of raindrops hitting it.

I didn't have time to fool with the base on the buffing arbor.

Jim

Re: A little gloat for old times sake.------WebKitForm

#5

Do they really live up to the hype? *LINK*

cooper suter------WebKitFormBoundaryimtXPF8F+KDxdj

>I forgot there also was an ECE Primus smooth plane and a Kunz #12.

Do the Primus really live up to the hype?

I guess I could actually try it on wood myself, but that would cut into the tool buying time.

Don't feel bad Bill, I'm sure your house looks a lot better on the outside than mine.

There's only so much time, and emptying someone else's basement is generally more fun than scraping paint.

Coop


Primus at Best things

Re: A little gloat for old times sake.------WebKitForm

#6

Paragon?

cooper suter

>Was out digging through the stuff, the #4 plane I remembered as a Paramo (low grade English) is actually a "Paragon".

Paragon isn't a name I've run across before, it's your basic Bailey type.

Looks to be newer and of decent quality; good finish, frog adjuster.

Who made/sold Paragons and when?

Catalog stock?

Coop

Re: A little gloat for old times sake.------WebKitForm

#7

Re: Where'd the "WebKit" tag come from? *LINK*

wilbur

>It's a bug involving WebBBS, which is the software that powers WoodCentral, and people that use Safari as their web browser.

Here's some info for the computer geek in you.


WebKit tag bug report

Re: A little gloat for old times sake.------WebKitForm

#8

Re: Paragon?

Jim in Alberta

>Paragon was a line of baily style bench planes which Lee Valley marketed for a short period. I remember they had problems with them as shipped from the supplier and had to regrind them to square the bodies/soles. This was before they started making the Veritas line. As I recall, they were made in england but do not remember by whom. I think I still have the old catalogue with them in. I will check tonight.

Re: A little gloat for old times sake.------WebKitForm

#9

Re: Paragon?

Denis Ch�nard, Orl�ans, Ont.

>Paragon was sold by Garrett Wade and Lee Valley many years ago, if my memory serves me right. I don't remember who made them, though.

I saw one in the wild a few years ago, looked pretty decent.

DC

Re: A little gloat for old times sake.------WebKitForm

#10

WOW, what a haul...

Scott Burr in Ben Lomond, CA

>A set of 750's...

Yep Cooper, YOU SUCK!

Re: A little gloat for old times sake.------WebKitForm

#11

Re: Paragon?

Rob Lee

>Hi Cooper -

Made by Footprint, re-worked by Lee Valley, and sold by Garrett Wade, and Lee Valley. #4, #4C, #5, #5C. Garrett Wade ran a few other products (like a 405) solo under the paragon name...

Cheers -

Rob