Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Manual for Stanley No46 Combo Plane?

Posts

Manual for Stanley No46 Combo Plane?

#1

Manual for Stanley No46 Combo Plane?

Dominic Greco in Richboro PA

>Hi everyone,

Does anyone know of a site where I can download a PDF of the manual for a Stanley No46 Combination (Skew Dado) Plane?

I got one from Ebay and it's missing some parts. I need an illustrated parts break down so I can determine exactly which parts are missing. I was lucky enough to find one for the No45. Bit don't know where I got it from.

My next step after determining what parts are missing (and if they are required) will be tracking them down.

See ya around,

Dominic

Re: Manual for Stanley No46 Combo Plane?

#2

Check ALF's site first *LINK*

Wiley Horne -- So. Calif.

>Hi Dominic,

You will likely need to figure out what type you have, to begin with. Then go from there.

Take a look at Alice Frampton's magnum opus on combination planes (see link below). She has some type studies referenced which should help, if you haven't already seen them.

Wiley


ALF on combination planes

Re: Manual for Stanley No46 Combo Plane?

#3

Re: Check ALF's site first

Dominic Greco in Richboro PA

>Thanks Wiley! That is a great site and a fantastic resource for anyone who loves their combo planes! I just looked through the site and plan to read more while during lunch tomorrow.

See ya around,

Dominic

Re: Manual for Stanley No46 Combo Plane?

#4

Re: Check ALF's site first *LINK*

Bob Demers

>Hi Dominic

There is'nt much instructions avail on the 46, but here is a link to a copy of it.

Bob, watching a darn good hockey game. Go Pittsburgh!


No 46 instructions

Re: Manual for Stanley No46 Combo Plane?

#5

So Dom got a real groover...

Scott Burr in Ben Lomond, CA

>Not much to one of these. It's nice to see you finally got a real plane!

8^)

You're going to love it. Let us know what it missing we probably have what your looking for...

Re: Manual for Stanley No46 Combo Plane?

#6

Here's what I'm missing

Dominic Greco in Richboro PA

>Scott,

I've been told that I missing the slitter and the fence for the plane. And well,....obviously the blades. :>)

I'm pretty sure I could get by without the slitter. But the fence is real important. Anyone got one they want to sell?

Hmmmm,.....I wonder if a fence from a No45 would fit it?

Later,

Dominic

Re: Manual for Stanley No46 Combo Plane?

#7

Thanks Bob

Dominic Greco in Richboro PA

>Bob,

Thanks for the link! I've been reading through that site. It contains a nice amount of info.

Later,

Dominic

Re: Manual for Stanley No46 Combo Plane?

#8

Nope

David Miller from Iowa

>A 45 fence will not fit a 46. Also, some VERY early 46s had a slightly different distance between the rods. These are uncommon so you probably have the standard 46 rod span. I might have something in the junk box, I'll check.

David

Re: Manual for Stanley No46 Combo Plane?

#9

Re: Here's what I'm missing

Derek Cohen (in Perth, Australia)

>Dom

I seem to recall that the #46 only came supplied with a fence from the Type 8 onward. I had a Type 6 (I think) and added a fence from a later model (courtesy of eBay). It was not a great success as the fit was not great. I subsequently sold it and bought a later model (Type 10) that came supplied with fence.

Regards from Perth

Derek

Re: Manual for Stanley No46 Combo Plane?

#10

Missing depth stop as well

Dominic Greco in Richboro PA

>Jim Reed also just gave me a heads up that I'm missing the depth stop as well.

Sure wish I had known I was missign all these pieces before I won it on Ebay! :>) Oh well, I can always consider it a "kit" plane.

See ya around,

Dominic

Re: Manual for Stanley No46 Combo Plane?

#11

Source for 46 parts *LINK*

Don in Northern Arizona

>Dom,

St, James Bay Tool Co. in Mesa, AZ makes a lot of replacement items for a 46. I believe Jim Reed also makes blades. I have the St. James Bay blades. They also make the 3/4" blade that Stanley forgot to include. Here is a link to SJBTC's replacement parts page.

Don

P.S. I will email your regarding a fence I have.


St. James Bay stanley parts page

Re: Manual for Stanley No46 Combo Plane?

#12

Hey Dom...

Scott Burr in Ben Lomond, CA

>I have a fence and probably a depth stop as well. Ping me off line, we'll talk.

Re: Manual for Stanley No46 Combo Plane?

#13

Thanks Don!

Dominic Greco in Richboro PA

>