Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Help with Bedrock 606 Adjuster nut

Posts

Help with Bedrock 606 Adjuster nut

#1

Help with Bedrock 606 Adjuster nut

Dominic Greco in Richboro PA

>Hi everyone,

I finally received my flat topped Bedrock 606 I won off of an Ebay auction only to find that the adjuster nut is frozen solid. It looks like it was rusted in place. Before I try and talk to the seller about this, I wanted to hear some options. Here's a photo:

As you can see, someone attempted to free this once before. All I did was hit it with a brass brush and give it some penetrating oil before taking this photo.

I'd like to know if there is a sure fire way to get this threaded stud unstuck from the adjuster nut.

OR the alternative would be to just get a comparable adjuster nut and stud from one of the many fine folks here.

Any help here?

See ya around,

Dominic


img

Re: Help with Bedrock 606 Adjuster nut

#2

Jim DeLaney, Austintown, Ohio

Re: Help with Bedrock 606 Adjuster nut

Jim DeLaney, Austintown, Ohio

>Lemme look around a bit. I may have a compatible set among the 'spares.' Left hand threads, right?

Jim D.

Re: Help with Bedrock 606 Adjuster nut

#3

Re: Help with Bedrock 606 Adjuster nut

Dominic Greco in Richboro PA

>Thanks Jim. I'm looking at the threaded stud right now and it looks like you would need to turn to the left to tighten and right to loosen.

Dominic

Re: Help with Bedrock 606 Adjuster nut

#4

Re: Help with Bedrock 606 Adjuster nut

Bob Demers

>Dominic

I only have a 602 in my Bedrock arsenal, and never really check that, but I do believed that the rod and adjuster nuts should be standard Stanley's fare, meaning any other regular Stanley Bailey of similar vintage could become a donor? I say similar vintage, but I dont recall that thread rod changing much if any, among the various types.

Its probably rusted solid, and your best bet is probably to try something like electrolysis.

As far as the seller is concerned, he should have definitively mention that fact in his listing, kind of hard to miss!

If he did, then as long as you got a got deal, fine

If not, I would go back to him and let him know my 'displeasure' :-)

In the end, as long as thats the only serious flaw, you should be able to return that puppy to service without too much fuss.

I love my little 602, and yes, I use it!

Bob, glad to see the Penguins bounce back. Now we have a hockey game! Go Sidney!

Re: Help with Bedrock 606 Adjuster nut

#5

Re: Help with Bedrock 606 Adjuster nut

Tom MacGregor

>I have a gallon container full of WD-40 that I use to submerge parts for a week or so to loosen them up. The old-timers (as if I'm not turning into one...) around here do the same thing with kerosene. I also use it to dunk parts coming out of the electrolysis bucket after a quick pat dry to draw all the moisture from the nooks & crannies. You can keep reusing it for a long time if your container has a tight lid.

Re: Help with Bedrock 606 Adjuster nut

#6

Re: Help with Bedrock 606 Adjuster nut

Todd Hughes

>Somthing like this is normaly easy to fix by just heating it up HOT with a propane torch. Doesn't hurt to spray it with a good penetrating oil first. WD40 while better then nothing is not a good penetrating oil get somthing like Blaster. Helps after you heat it up as it cools some to spray the oil into it again.

The hardest part you will be have is holding the shaft while you try to turn the nut. A leather padded vice jaws might do it and will be easier then maybe using the plane itself.

This identical part is the one used in common Stanley bailey planes so probably makes more sense just get a nice one off a junk plane to use as this one looks kind of funky already anyway....Todd

Re: Help with Bedrock 606 Adjuster nut

#7

Re: Help with Bedrock 606 Adjuster nut

paul womack

>The hardest part you will be have is holding the shaft while you try to turn the nut. A leather padded vice jaws might do it

I've used aluminium (and/or copper) jaw liners for this, with good results.

BugBear

Re: Help with Bedrock 606 Adjuster nut

#8

Re: Help with Bedrock 606 Adjuster nut

paul womack

>Further, to grip a round object (e.g. brass adjuster nut) for turning, with minimal damage, tighten a jubilee clip (hose clip) around it.

Then use whatever gripping tools you like; the projecting screw assembly of the clip makes turning the resulting composite easy.

The uniform pressure does little damage, and the grip is AWESOME.

BugBear

Re: Help with Bedrock 606 Adjuster nut

#9

Re: Help with Bedrock 606 Adjuster nut

Marv....... Northern California Lake Co.

>To better grip the threaded screw, you might try using a drill chuck. You will have three jaws gripping instead of only two in a vise.

If you have some aluminum tubing with an I.D. that will fit the thread, cut a short piece and then cut a slit length wise and slip it on the thread to clamp onto. It doesn't have to be tubing, but anything aluminum is best for protecting threads in that kind of situation.

Now clamp the drill chuck in a vise and heat the brass a little and then do as Todd said and use leather and a pair of channel-locs to turn the brass. At first just wiggle it back and forth until you losen it a bit. It might losen up without heat once you have devised a good clamping and gripping method.

Don'tcha just love eBay?

Marv

Re: Help with Bedrock 606 Adjuster nut

#10

Nice!

Dominic Greco in Richboro PA

>BugBear,

Thanks very much for the tips!

The hose clamp idea is PERFECT! I'm smacking myself in the head now saying "Why didn't I think of that!".

You just gotta' love a day when you learn something new.

See ya around,

Dominic

Re: Help with Bedrock 606 Adjuster nut

#11

Only a 602...

Scott Burr in Ben Lomond, CA

>Hey Bob you get a big 'ol YOU SUCK!

Only bedrock in your arse-anal you mean...8^)

Re: Help with Bedrock 606 Adjuster nut

#12

Talk to the seller...

Scott Burr in Ben Lomond, CA

>Get some of you money back, follow the advice you received here and Bob will buy you a clod one!

Re: Help with Bedrock 606 Adjuster nut

#13

Re: Only a 602...

Bob Demers

>LOL

Scott, If you only knew how I acquired it, then you would really think I suck! :-)

That little plane was given to me by an old friend, one of my mentor when I was a younger serviceman. The funny thing is, I didnt really wanted it, he wanted to give it to me because to him it was part of a few 'old pieces of junk' he had no use for, but knowing my interest in acquiring old tools (it was all I could afford at the time) he offered it to me along with a few more tools. Now among the other offering were a few interesting tools, like 4 fold boxwood rules, a 4 ft zig-zag rule, chisels etc, but that little plane did not interested me because it look pretty sad without its rear tote and I thought its just one more smooth plane, I didnt need another one.

Anyway, he insisted I take it, or it would just end up in the dump, so I did, not wanting to offend him.

A while later, I decided to clean it up and have another look. Thats when I realized that it was definitively of a better construction standard, and that the Bedrock 602 name was revealed to me under all that grime and rust. Curious I look it up, and discovered that lo and behold, it was a special plane indeed. A rarer one at that :-)

Once I discovered its potential value, I was a bit embarassed that he gave it to me, so I went back to explain to him its potential value, and that I didnt feel right he gave it to me outright. He just smiled and told me that he was glad I took it!

Years later, I got a replacement rosewood tote off Ebay, sharpen the blade, and have been enjoying it ever since.

Despite its diminutive size, it truly is a great plane to have in your arse-anal or whatever that spell :-)

So I guess, yah, I may kinda suck he he

Bob, the lucky one

Bob

Re: Help with Bedrock 606 Adjuster nut

#14

Only a 602...Before

Bob Demers

>Hey Scott

just to tease you...:-D

Here are the before and after pics of my little pride and joy

Bob, rubbing it in LOL


img

Re: Help with Bedrock 606 Adjuster nut

#15

Only a 602...After

Bob Demers

>And back into Yeoman service, thanks to an Ebay dealer making and selling repro totes. I try a few unsuccesful time to get an original tote off Ebay but got beat everytime, darn!

They dont come up very often neither.

Bob, revelling in his morning coffee :-)


img

Re: Help with Bedrock 606 Adjuster nut

#16

Yesire Bob...

Scott Burr in Ben Lomond, CA

>You do know how to rub it in, well! 8^)

Nice story though. I like how it came into service to you.

Enjoy!

Re: Help with Bedrock 606 Adjuster nut

#17

NIce

Bill Houghton, Sebastopol, CA

>and nice that you didn't over-restore it - leaving the irregular patches of paint on the side of the frog makes it look more like a tool to me.

Re: Help with Bedrock 606 Adjuster nut

#18

Re: Talk to the seller...

Dominic Greco in Richboro PA

>Scott,

You wrote:

Get some of you money back,...

Just last night I sent a politely phrased email to the seller. I fully expected to get a "Caveat Emptor" email back. But I was pleasantly surprised with a similarly polite email telling me to expect a refund of the portion I paid. Now THAT ladies and gentlemen is a seller I will gladly buy from again! :>)

Alls well that ends well.

See ya around,

Dominic