Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

Finishing

Posts

Finishing

#1

Finishing

John Hoffman

>Hi guys,

Two quick ones on finishing.

1. How do I get wax off a piece so I can apply a varnish?

2. On another piece I used a crotch white oak board. I used oil then a wiping varnish. It has developed some minor checks. Can or should I attempt to fill these and if so what should I use?

Thanks

John

Re: Finishing

#2

Re: Finishing

ThomD

>Wax remover? They used to sell it in a nice big Texaco can at the supermarket, back in the days when folks waxed and buffed their floors every week. I imagine there is something similar in the paint department. I think some people throw caution to the wind and use gasoline. Though I wouldn't myself.

Another option is to go to your x-country ski store and buy some wax remover and cloths there. That stuff just eats wax, and seems a lot less nasty than the industrial products.

Re: Finishing

#3

Hi John,

Scott Burr in Ben Lomond, CA

>To remove wax, I use thinner, lacquer of paint will work fine.

As far a filling checks, you can sand the varnish lightly against the grain to fill the checks, then wipe the excess off with the grain.

May take a few passes to completely fill.

Good luck!