Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

new Lee Valley lapping plate

Posts

new Lee Valley lapping plate

#1

new Lee Valley lapping plate

Bruce Mack

>See what's new on their site. I've been waiting for this but thought it might be intended for honing with diamond paste. Apparently not. I guess the channels would interfere with that function, and suspect the unchanneled bottom is not smooth/flat enough for that use. Any thoughts from other readers, or even Mr. Lee?

Re: new Lee Valley lapping plate

#2

Re: new Lee Valley lapping plate

MikeW

>Hi Bruce,

I'm use to lapping with the SiC powders as that is what my Shapton cast iron lapping/flattening plate uses. It too has the reliefs. It works very well as I suspect this one from LV would.

Take care, Mike

Re: new Lee Valley lapping plate

#3

Re: new Lee Valley lapping plate

Bruce Mack

>Thanks, Mike. I guess I'll buy it. If I don't use it much, it still is a piece of work

Re: new Lee Valley lapping plate

#4

Re: new Lee Valley lapping plate

ThomD

>That's about 10x times what I paid for the original LV lapping plate that was just a flat plate of iron. That's a pretty attractive new tool though. With the original it was quite thin and I had to make a base for it that I hoped wouldn't shift in use. I may retire the old tool as a diamonf lapping plate.

Woodworking clubs might consider getting together and buying a surface grinder as they can be found for 500 bucks.