Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Grinder position

Posts

Grinder position

#1

Grinder position

Phil Joines Krum, Tx

>One thing I've learned from grinding turning tools and small tool bits is to position the grinder way higher than the commercial stands allow. The centerline of mine are just below my shoulder height when I'm standing strait. That way I can see what's going on without bending over and have better control.

Re: Grinder position

#2

I totally agree.

Don in Northern Arizona

>Phil,

I am building a rolling cabinet for my grinder that will put the wheel center line at about chest high. I experimented and found that that is a comfortable height for me. Turning requires a lot of grinding and bending over one of those pedestal stands for any extended time is painful.

Don

Re: Grinder position

#3

an alternative position

Bill Tindall, E.TN

>When I am nibbling microns at a time off the edge of a chisel while keeping it cool, straight and the bevel seated on the curve of the wheel I need to be in a comfortable and relaxed position. For me that is not standing. I grab a stool for my grinding sessions which puts me at about the height you suggest.

And did any mention good lighting.........

Re: Grinder position

#4

Re: an alternative position

Nicknaylo

>I was storing my hand cranked grinder on the windowsill in the shop, about shoulder height and one day decided to just put a quick edge on a turning tool without taking it down. Works great at that height, I can see the bevel easily and it pretty much stays up there on the sill now