Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Another brace.

Posts

Another brace.

#1

Another brace.

Derek Cohen (in Perth, Australia)

>I do fear that I have found another slope - bearing in mind my recent posts of Yankee braces. Here is a 6" brace I bought today for no other reason that it is beautiful. I suspect it is collectable, but that was a secondary consideration.

This is an early Miller�s Fall brace, dated April 10, 1867 (amazingly, it was in Australia!).





Here are some feature details..,





Searching for info, Sandford Moss (on Sydnassloot.com) has this to say:

Clemons B. Rose of Sunderland, Mass was awarded at least six brace patents, two of which were important ones. One, #63944 was issued on April 16, 1867 and is the basis for the "Rose" chuck found on some early Millers Falls braces. It was reissued on January 5, 1875 as #6212 (under the aegis of the Millers Falls Mfg Co).* The chuck features a pair of jaws that protrude from the mouth of the chuck as the knurled ring at the top is turned. Like the Goodell chuck (and later Fray chuck with interlocking jaws), the jaws are grooved on their outer sides, at the base, and engage threads on the inside of the knurled ring. These chucks have prominent brass ferrules below the ring, are showy, and prized by collectors. The four braces below include two of larger sweeps (both 12") and two smaller ones (6" & 8"). One of the larger braces (at the top) is marked, "Bitstock Co., Greenfield, Ms / Pat�d April 16, 1867. According to Randy Roeder�s research, the "Bitstock Co." may have been operated by Gunn and Amidon (both Millers Falls partners). Perhaps this was a guise to manufacture the Rose patent chuck before its acquisition by Millers Falls in 1869)



Any additional information on the forum? Users?

Regards from Perth

Derek

(restoring two MF eggbeaters, one an early No2 with the anti-friction gear support roller, and the other a No 5).

Re: Another brace.

#2

Re: Another brace.

Stuart Hough

>Nice catch, Derek. The "chuck" sure doesn't look like any I have seen before. How does it work?

Re: Another brace.

#3

Re: Another brace.

Derek Cohen (in Perth, Australia)

>Hi Stuart

I have not received it yet. It is in the mail (I excitedly edited the info I had to share my luck). However I anticipate that it is similar to the following mechanism (from Sandy's website).



The variation is that the locking is a sliding mechanism rather than one that screws together.

I am sure others here will chime in with the correct info.

Regards from Perth

Derek

Re: Another brace.

#4

Re: Another brace.

Stuart Hough

>Thanx for the extra photos! It still amazes me that in the age of the horse and buggy, our ancestors made such things to such a high level of precision as that, without all the high-tech gee-gaws that we seem to require to do the same thing!

Re: Another brace.

#5

Moses Yoder

Re: stupendous brace.

Moses Yoder

>Have to say I have not seen one with that type of chuck, and would trade one of my 2101's for it any time. Actually might trade 2 of them for that one ;) I'm sure Todd finds them hanging on the shrubs around the east coast and Kevin has probably gotten an orange crate full of them from the land fill but in the old tool purgatory in which I live they don't exist. Thanks for the pics- it looks like a really nice brace. I don't have a brace problem at all; all of my braces could actually be used to bore holes.

Re: Another brace.

#6

Thank you ! . . .

steve mackay

>Never seen the " chuck " broken down & feild stripped before. Pretty intricate stuff for it's day. Heck, even for today !

Re: Another brace.

#7

Congratulations on a grand brace!!

Wiley Horne -- So. Calif.

>It's a killer! 6" sweep, too. Am sure Sandy would enjoy a note on it--email copy of this post perhaps.

Wiley....wondering when and how Millers Falls tools entered Australia

Re: Another brace.

#8

Re: stupendous brace.

Todd Hughes

>I recently bought one at the PATINA tool auction and have seen a few others over the years. I paid around $18 for the PATINA one if I remember right. Was in very nice condition too. I sold it on the ebay and even though presented well and talked up good went for $57. Sort of was hoping for a better price,,,OH well.

Kind of strange but a nice Stanley Yankee brace from the 1950s would have sold for more.....Todd

Re: Another brace.

#9

Re: stupendous brace.

Derek Cohen (in Perth, Australia)

>Hi Todd

I guess that beauty is in the eye of the beholder. There was just one other bidder on this brace. Clearly it was not seen to be desirable. Actually I would go further and say that braces are not a popular item on ebay (Australia, that is). The usual fare here are UK-made, very basic ratchet braces. I have never seen Yankee or a Fray Spofford or anything else that was "interesting" (i.e. Collectable). Without a bidding war, prices remain low.

I think that braces generally lack "status" among handtools.

The Yankee braces have a glamour status in the USA. But they seem to be the only braces that garner any serious attention on eBay (USA). Could it be that they are seen to have all the bells and whistles. Older and less user-friendly (ratchetless) braces, such as the MF, only appeal to the enthusiast or the collector. What do you think?

Regards from Perth

Derek

Re: Another brace.

#10

Re: stupendous brace.

Todd Hughes

>Its been a while but I used to do very well with selling any unusual brace on the ebay, have gotten over $200 for a few with different chucks.Always nice to sell these things because when you find them in the wild you know you are going to be getting then cheap. The best one I ever sold actually had a guy give to me because I had bought some other stuff and he thought it was worthless.

... I sort of got the feeling that there was a small but very serious group of brace collectors out there willing to pay to get what they wanted. Like I said this was several years ago and maybe now they have what they need......Todd

Re: Another brace.

#11

That's a interesting one...

Scott Burr in Ben Lomond CA

>Very elegant brace I must say. The form following the function is well excuted. Guess a few of us will be looking out for them now. Like I don't have enough braces all ready...