gone fishin *LINK*
scott grandstaff
>Hamler fishy with Grandstaff carved fawn's foot handle.
http://users.snowcrest.net/kitty/sgrandstaff/images/hometools/fishy2.jpg
yours Scott
fishy
Knowledge You Can Build On — Est. 1998
gone fishin *LINK*
scott grandstaff
>Hamler fishy with Grandstaff carved fawn's foot handle.
http://users.snowcrest.net/kitty/sgrandstaff/images/hometools/fishy2.jpg
yours Scott
fishy
Nice looking handle...
Scott Burr in Ben Lomond CA
>I'm guessing you won't be pounding any 12 penny nails with it. ;^)
Whoa, you gotta 'splain some thins...
Alan DuBoff
>Scott,
Good to see your name around here...but what's with the drive-by?
1) did you make that fishy head?
2) What's with that frickin' drive-by with the chariot plane? Did you make that plane? If so, could you explain?
Hope all is well up in Happy Camp...
The thing looks kinda fishy to me....
Marv....... Northern California Lake Co.
>
Re: Whoa, you gotta 'splain some thins...
scott grandstaff
>Hey Alan
Oh yeah, I made the head..... not!!
Those are Paul Hamler castings of course The head and the slipper plane both.
I carved the rosewood fawns foot handle for it. A little odd of a job I tell you. I made what I thought was going to look nice (not my first carved handle in this life, must say) But it was too big!
Cut it down, down, down some more and finally got to the proportion I was after in the first place.
I'm not used to that! I guess it was a scale. :-)
Now what, a guy can't toss a drive by ever once on a while?? hee hee
yours, Scott
Re: gone fishin
Wiley Horne -- So. Calif.
>Scott,
There's sure a lot to look at in that photo! The little brass fish hammer is a grand effort by Paul Hamler. I had the pleasure of chatting with him recently in regard to a scraper plane insert he's fixing to come out with (it's extremely effective), and he said his next venture was going to be a Pennsylvania-Kentucky rifle (repro. of Davy Crockett's!). The guy is incredible.
Your fawn foot handle makes me want to go copy it right now! Is that a traditional design, or your own, or .....? It looks like the grip--the fawn's actual foot--is offset a little right, as if for a right-handed person, or am I imagining that?
Uhhhh. The plane. What about the plane? I confess I'm ignorant about these killer collectibles, so for folks like me the plane needs an introduction, if you don't mind.
Thank you very much for posting the photo!
Wiley
Should have read yr. reply to Alan re the plane
Wiley Horne -- So. Calif.
>
Re: gone fishin *LINK*
scott grandstaff
>Thanks Wiley
Oh, I'm just an old handle carver. Pretty hopeless really.
Saws, planes, hammers, chisels, whatever.
Tried to get Asa interested in printing an article outlining handle sizes and their relation to ordinary glove size in humans, cause I like a handle that actually fits when I can get it. And did considerable research with prepared patterns and all. Saws and plane totes especially. I do them in sizes.
But wattaya gonna do?
Here is a size 8-9 tote from last month instead of the meager size 6 it came with.
http://users.snowcrest.net/kitty/sgrandstaff/images/hometools/forescrub3.jpg
And here's another curved hammer handle on a 12oz Craftsman trim hammer. (the link?)
I have a webpage but it's woefully behind.
http://www.snowcrest.net/kitty/sgrandstaff/
yours Scott
not sure how this post is going to work. Hope it's not against protocol.
curved hammo handle
Re: gone fishin *LINK*
scott grandstaff
>Oh Yeah
Wiktor put the forescrub story (the recent tote in question) up just yesterday, doh!
You'd think I would remember since overnight!
Oh, I might be hopeless.
yours again Scott
forescrub
Re: gone fishin
Wiley Horne -- So. Calif.
>Scott,
That's a great looking handle. The way the grain tracks, the overall curve, and the foot (grip).
By the way--WELCOME!! I'm used to seeing your posts on OLDTOOLS, so will comment on the rules here since you asked. There is never a problem linking to your website in response to a question, like when I asked about handles.
Wiley
Is Paul Hamler in Oregon by chance?
Alan DuBoff
>Scott,
A guy I know that does a lot of work on musical instruments, has a set of 5 small violin maker's planes that he got from a guy in Oregon. He said the guy doesn't make them anymore though...
The small planes are some of the most wonderful little tools, and they feel so comfortable in the hand from the way they were cast.
They must be from the same guy I suspect. The owner told me that he bought them after the maker quit making them, as he felt the people buying them were not using them, but collecting them...and that is not what he had wanted.
Here's a pic, you can barely see them, but they have round wooden knobs on them and soft indentations for your fingers on the side of the plane, very nice design. Beautiful tools...you might know if this was the same guy...Please ignore all the other stuff, the pic was from a local metalworkers meeting, just so happens this guy does a lot of tool work for instrument makers so brought these along to show us the great craftsmanship. He bought them about 5-10 years ago.
Nice fore plane
Wiley Horne -- So. Calif.
>Scott,
Just wanted to say that I admire the handle you made, and the fore plane itself is beautiful. I much agree with your point about doing preliminary stock preparation with a longish plane. As described in Moxon. It strikes me that fore planes are under-discussed on these forums, and seem to be somewhat out of favor. I don't know why, other than the overall bias toward thin shavings rather than thick shavings. Thanks for the post.
Wiley
Re: Is Paul Hamler in Oregon by chance?
scott grandstaff
>Hi Alan
Nope, I suspect you are talking about Chris Larman.
About a decade or so ago? Chris was making brilliant finger planes.
Load up a bunch of spare tools and take a show table at the PNTC's next Best of the West show. Just take my word for it. heh heh
yours, Scott
It was about a decade ago... *LINK*
Alan DuBoff
>Seem the guy who owns the finger/violin planes did in fact buy them around a decade ago. He does a lot of musical instrument work. He has quite a few things he mills and/or fabricates for musical instrument repair people.
His website is really helpful for metal workers. I'll link to it for you, in case you haven't seen it. I know you do some metalwork with your toolmaking and such, although you probably wouldn't call it toolmaking, I would...:-) Frank has been pretty helpful, he hangs out at a local metalworker's group I attend over at the Tech Shop. They meet this Tues. at the Tech Shop actually. He often gives demos.
FRETS.COM Machining