First, I agree with everything about...
Ted Owen, Pittsburgh
>not doing anything to harm the value of a true collectible. But it sounds that you're like me and bought the planes to use them. So here's what I do.
Clean all woooden and metal parts in Murphy's Oil Soap and warm water. I plunge even the plane body into the bucket of water. Use a soft brush where needed, soft toothbrush for tight quarters, but you may get by just washing with an old dishrag. The dishrag is all I do on the metal parts, but they get cleaner in the next step, so you don't have to get them perfect at this stage.
Dry immediately and thoroughly!! Use a hair dryer if you have to, but get everything dry within 60 seconds.
Then I take the parts to a Beall buffing setup, popular with woodturners, which I use on a Shopsmith. Except for the wedge, Beall buff the wooden parts with Tripoli, then White Diamond, then Wax. The wedge should remain unfinished where it friction fits into the plane body, though I do buff the top just for looks.
Buff the metal parts on a burgundy ScotchBrite wheel. Don't do this on any Nickel plated parts, but they're usually not present on older wooden hand planes anyway. Then perform the same Beall 3-steps with a different set of buffing wheels--dirty metal makes the buffing wheels dirty quickly, but they still work. Then shape, sharpen, hone the blades as necessary and finger-tip apply a touch of Carmelia Oil.
Reassemble and enjoy using. When I use the old wooden hand planes, I always think of the former users and hope they would be pleased.
Best, Ted