Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Looking for some ideas on.............

Posts

Looking for some ideas on.............

#1

Looking for some ideas on.............

Richard Jones

>file and rasp storage. In the past, I've used both vertical and horizontal storage, and of the two, the vertical allows me to better see which tool is where.

I'd love to see what YOU do.........

Thanks.

Rich

Re: Looking for some ideas on.............

#2

Jack Guzman from Maine

Re: Looking for some ideas on.............

Jack Guzman from Maine

>I keep my rasps in a shallow drawer with a non slip liner so they don't bump against each other. I don't trust hanging them by handles because my shop experiences drastic humidity changes and they could fall out.---Jack

Re: Looking for some ideas on.............

#3

Re: Looking for some ideas on.............

ThomD

>I made up horizontal Japanese chisel racks that I use for a wide variety of tools. Actually most of the chisels are in fitted racks. The Japanese racks consist of rows of 1/4" dowels sticking out and anything of medium weight can be laid across a few pegs. The only problems arise if I overcrowd the pegs.

Re: Looking for some ideas on.............

#4

Re: Looking for some ideas on............. *LINK*

Wiley Horne -- So. Calif.

>Richard,

Rasps...I have them vertically in a closed box, behind the bench where I can reach them. There is a photo in the attached link--look at the far right of the photo, midscreen--there are some rasp handles sticking out of a box. The box has slots to receive the rasp blade, with dividers between slots.

Files....Flat drawer, with dividers. One of the best things you can do for yourself, IMO, is build yourself a sharpening station, where the base of the sharpening station has as many flat drawers (2" to 4" total height) as you can cram in there. You can't have too many.


Box 'o rasps is far right in photo--midscreen

Re: Looking for some ideas on.............

#5

Man that is pretty

Wayne Carson "TX"

>My LOML would love my working area (shop)to look like that, (heck I would like my shop to look like that). How can you find anything without sawdust on top of it.

Really a nice setup

Wayne

Re: Looking for some ideas on.............

#6

I store mine...

Scott Burr in Ben Lomond CA

>Flat in a drawer this thin wooden dividers seperating them. But, I'll always looking for better ways...

Re: Looking for some ideas on.............

#7

Waaaayyy too clean...

Marv....... Northern California Lake Co.

>Wiley,

Wow..if my shop was that clean, I wouldn't be able to find a damn thing!

Very nice!

Marv

Re: Looking for some ideas on.............

#8

Hey Wiley

Dan Donaldson

>Remind you to never let you see my shop ;-)

Re: Looking for some ideas on.............

#9

Moses Yoder

Re: Looking for some ideas on.............

Moses Yoder

>I have a removable file / rasp handle that clamps onto the rasps when I need it, so when I built a rack for those tools I put them in slots cut into two uprights. I'm not saying this is the best way to store them, but it is an idea. I am thinking I will make individual handles for each tool and then build a rack to store them upright with the handle attached. Of course if the door was wide enough I think I would still store them horizontally with the handle attached.


img

Re: Looking for some ideas on.............

#10

You're right, Marv, course

Wiley Horne -- So. Calif.

>it has only looked like that once in its life, about 7 saws ago. In fact, I dropped a brass screw from the vise into the shavings a coupla years ago. Saw where it entered the pile. Down on hands and knees, sorting through a knee-deep pile. Still ended up having to write Lee Valley to send me another one. Which they did--two in fact--they figured it'd happen again.

Wiley

Re: Looking for some ideas on.............

#11

Thanks............

Richard Jones

>for all the ideas. The drawers sound good, need a good reason to practice the dovetails anyway...........

Gorgeous shop, BTW, very nice..........

Rich

Re: Looking for some ideas on.............

#12

Re: Looking for some ideas on.............

Stuart Hough

>Nice setup Wiley! that gave me a bunh o'Ideas!

Re: Looking for some ideas on.............

#13

Ellis Walentine

Second that. Nice shot, Wiley.

Ellis Walentine

>

Re: Looking for some ideas on.............

#14

Now you just did it Wiley...

Denis Ch�nard, Orl�ans, Ont.

>I have to buy a new keyboard, this one is covered with drool! :-)

DC