Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Rob Lee's belated April Fool's Tool...

Posts

Rob Lee's belated April Fool's Tool...

#1

Rob Lee's belated April Fool's Tool...

Alan DuBoff

>Yes, the pocket-poker-nater...

I got my loosing tool back from the WC Toolmaking contest, and lo and behold, inside the box was a belated April Fool's Tool as a consolation prize.

It has several good uses possibly...

You can use it as a key holder, in which case it actually punctures the inside of your jeans pocket (polyester for you true nerds;-) Possibly loose something more valuable than the pocket-poker-nater, since the keys will hold it in but all your money will fall out...

Worse, it will poke your privates, it seems about as safe as having a sharp chisel in your pocket...*gd&r*

You can *ALMOST* use it to open a cold beverage, but unfortunately, they didn't incorporate that into the design very well, and it would be difficult to use as an opener safely. I'm still keeping an open mind on this one (pun?), it could be useful at some point when a real opener is not available...kinda like how a galoot uses a wrench for a hammer, well, I've *NEVER* done it, but have heard that some galoots have...:-/

I'm sure it works great for measuring lumber, but I most often do that by eye, unless I use a ruler of some type.

So, I do appreciate the gesture, but seriously, is this a belated April Fool's Tool? :-)

I just know that several years down the road, this thing will show up when someone in the family pulls it from the back of the drawer, and blurts out, "WTF is this?", I know that I'm still saying it when I pick it up...hehehe

OTOH, nothing more fitting than sending a loosing tool, with a loosing tool...back to the maker...*LOL*


img

Re: Rob Lee's belated April Fool's Tool...

#2

Sorry Alan... *LINK*

Rob Lee

>... we had one, but I made the designer take off the bottle cap opener... :)

Had to stay somewhat faithful to the historical designs, as I didn't want the 1940's version of Adam coming after us.....

Cheers -

Rob


Other concepts....

Re: Rob Lee's belated April Fool's Tool...

#3

ROTFLMAO......sorry...*smirk*

Marv....... Northern California Lake Co.

>

Re: Rob Lee's belated April Fool's Tool...

#4

And I'm sorry also Rob!

Alan DuBoff

>Rob,

It was obvious by your email you sent that you didn't think this was funny, and I'd like to post this response public in addition to my email response I sent you.

I have been nothing but a supporting customer of LV, you offer great tools, good value, and exceptional service.

Over the years I have noticed other novelty items that you offer, and I have never bought any of them, although I have looked at some of them and considered some occasionally, I have never actually bought one.

I don't know how much money I have spent with LV, it doesn't even matter, what matters to me is that I am a customer and have bought and used your tools in my working, and even when I had a bad QR nut on the vise, you sent me another one at no charge (I would have paid) even 2 years after the purchase. This was a very honorable thing for a vendor to do.

I normally don't like to call something useless, especially something that such thought had been put into.

I will offer my pocket-poker-nater up to some deserving sole who finds it useful, because quite honestly it will find it's way into the bottom of some drawer only to be pulled out several years later with an odd comment wondering what it is.

I would have found a single piece of graph paper more useful, it would have helped me to perfect my lousy tool design.:-)

In fact, I use LV graph paper to design much of my stuff, and find it very useful.

I pondered that if I could forge this, I could make it into a bottle opener, but alas, this plated steel is toxic in the forge and I don't like to risk the consequences of trying to forge such a piece.

Sorry if I offended Rob, my humor is not for everyone, and next time I'll accept such a generous offering in a more professional manor.

If someone wants this, I'll pay postage on it, just email me your addy, and it's yours. I might toss in something else that is useful to you. Not that this pocket-poker-nater won't be useful, and I certainly don't want to sound ungrateful, just trying to be honest.:-)

Re: Rob Lee's belated April Fool's Tool...

#5

He he he...

Scott Burr in Ben Lomond CA

>The LV pocket castrator for the males in the group and the pocket piercer for the ladies.

Scott runnin' for cover...

Re: Rob Lee's belated April Fool's Tool...

#6

On the contrary,

Wiley Horne -- So. Calif.

>Rob's was very funny. Just a bit subtle. Accepting gifts is an art.

Wiley

Re: Rob Lee's belated April Fool's Tool...

#7

As I said in my email...

Rob Lee

>... I take no issue with what you've said... it's just the context in which you did so was a tad upsetting to some of our staff who worked really hard on that contest.... and I was letting you know that you could a been a bit more tactful.

It's sometimes easy to forget that there are people working behind the scenes who care about what other people think of their efforts - and they read these boards too...

Didn't really think it warranted public discussion, which is why I sent you a private email - no worries on my end!

Cheers -

Rob

Re: Rob Lee's belated April Fool's Tool...

#8

Maybe TLN would trade some tattoos???

Alan DuBoff

>Since I have your staff's eyes/ears, I have to tell the folks at LV that I may have underestimated the true value in the pokernater. It could be useful for those times when you need to get something out of a hole, and don't want to stick your finger down there...that's a useful thing that I would normally use a screwdriver for, so it could save me from getting something on a screwdriver that doesn't want to come off easily...*g*

So, to be fair, I decided to go to LV's site and just do a search on measuring, to see how much this nice little gadget sells for...$8.95. To be honest, I bet you don't sell many of them. *VBSEG* Maybe that's why you decided to toss one in my box? :-/

Then I decided to look at some of the other items in the 3 pages of tools, and there are actually some valuable tools, and the plastic calipers popped up, those look kinda interesting. I would not have thought of that...but those could actually be useful (and do most everything the pokernater is capable of, sans holding keys.

Aside from holding keys, the plastic calibrators will do more because they will measure inside/outside, and can do it in both imperial and metric, as well as measuring larger than a 2" stock. Even a better price...than the pokernater, could have saved Rob some dough, doncha know???? *wink*

Those cabinetmaker's tapes for $3.90 look like a pretty good all around value also. Those could have saved Rob a boat load, less than half the price and it would offer more to the recipient.

I wonder if TLN would trade some of these temporary tatoos for the pokernater? Maybe I'll ask him...hehehe All in fun...*wink*


img

Re: Rob Lee's belated April Fool's Tool...

#9

Re: On the contrary,

Marv....... Northern California Lake Co.

>Perhaps it's just me, but I see humor on all sides of this issue...but then I wasn't one who entered anything in the contest.

For such a prize, I wish now that I had.

Question, did the contestants pay shipping both ways?

Marv

Re: Rob Lee's belated April Fool's Tool...

#10

Re: No, return shipping was free

Dave Mount

>Aside from the tool itself, total cost to the entrant was $10 USD plus shipping to Lee Valley.

The organizers paid for return shipping, plus provided the previously discussed thickness gauge plus a year subscription to *both* Popular Woodworking and Fine Tool Journal. That doesn't include unpacking the tools, transporting the US shipments across the border to Ottawa, repacking the tools (and they were well packed), transporting the judges to Ottawa, keeping the office open over the weekend, and many other background costs I'm sure were incurred.

In my estimation, a pretty good return for the entrants, even for those of us that didn't win a prize. I gladly placed my thickness gauge in the drawer with my other, similar tools like bevel gauge, drill bit gauge, dial calipers, etc. I'm certainly not complaining.

Best,

Dave

Re: Rob Lee's belated April Fool's Tool...

#11

Re: The first law of holes. . .

Dave Mount

>. . .when you're in one, quit digging.

Re: Rob Lee's belated April Fool's Tool...

#12

How did you figure that out?

Alan DuBoff

>Dave wrote:

"The organizers paid for return shipping, plus provided the previously discussed thickness gauge plus a year subscription to *both* Popular Woodworking and Fine Tool Journal."

Curious how you knew?

I'm looking at my letter, and Ellis hopes I enjoy the complimentary magazine subscriptions, but it doesn't tell me what they are. It also mentioned, "and Lee Valley thickness gauge".

It was more than honorable for LV to host the contest, and certainly to pay shipping back, I hope I don't appear to be totally ungrateful. Just giving my feedback on this thickness gage.

Seriously though, how did you know what actual magazine subscriptions were given away? First I've heard, as my letter with my tool didn't actually say...*wink* (aren't I the rebel rouser?;-)

Re: Rob Lee's belated April Fool's Tool...

#13

Deletion

Wiley Horne -- So. Calif.

>Hello Everyone,

I have deleted Alan Duboff's reply to Rob Lee because of its calculated disrespect to another forum member.

Wiley....as Moderator

Re: Rob Lee's belated April Fool's Tool...

#14

Ellis Walentine

Check out the contest page

Ellis Walentine

>We did mention the free subscriptions in the contest instructions. Maybe we didn't make it clear enough.

Cheers,

Ellis

Re: Rob Lee's belated April Fool's Tool...

#15

Don't want to stir this up more

Bill Houghton, Sebastopol, CA

>but I might find this a convenient tool - don't know until I try it. I appreciate all the energy that Rob, his crew, and the other participants who made this contest fun, and I think the lumber thickness gauge was a courtesy tool, and appreciate the courtesy offered, even if I never use the tool much. It's unreasonable to expect Rob to give us all, say, a plow plane (even the large one). I found it quite a deal, overall - would have been worth it even if all I did it for was the magazine subscriptions - wound up being fun for free, not easy these days.

My thrill on opening the package was finding out that my pitiful little tool is now part of Lee Valley's inventory system! even if it was just to keep track of it during the contest.

Re: Rob Lee's belated April Fool's Tool...

#16

I own one..

Norman Pirollo (Ottawa, Ont.)

>I bought a LV Thickness Gauge. I find it a cool tool,

and have used it a few times already when shopping for lumber.

I can run it along the edge of boards to check for any bow in a board that isn't immediately obvious, much like a depth gauge..

Norman

Re: Rob Lee's belated April Fool's Tool...

#17

I will check it out...

Alan DuBoff

>Ellis,

I had looked before and didn't see anything, but will go look. I really enjoyed the contest and all the tools looked very nice, LV was most gracious with shipping and all that...

I guess others just don't see the irony of the measuring tool, it just makes me laugh...the subscriptions are certainly much appreciated. The letter wasn't very clear to me, which is what I got back with my tool, and I don't want it to appear as I'm complaining...

Ok, let me crawl back into my irony space...this thread might be best left to rest/die...:-/

Re: Rob Lee's belated April Fool's Tool...

#18

Ah, a dirt digger, I hadn't through of that!*lol*

Alan DuBoff

>

Re: Rob Lee's belated April Fool's Tool...

#19

Moses Yoder

Re: badge of honor

Moses Yoder

>That tool is a badge of honor, and I would wear it as such. Perhaps not with the same pride as a purple heart, but still it is evidence that you participated in the first ever WoodCentral tool contest. I bet a bunch of those will get thrown out by our children, and the generation after that will be paying thousands of dollars to get one for their Lee Valley tool collection. After all, it looks to be more useful than a Stanley #1 plane.

Re: Rob Lee's belated April Fool's Tool...

#20

wear it with honor

Adam Cherubini

>I think you're on to something Moses. How about we get Rob to make one for width, not just thickness. I would buy that and wear it on a gold chain around my neck like flav o flav.

Yo yo. Adam's in the house!

Can I get it in gold Rob?

Keepin' it real for my homies. Peace out.

Adam

Re: Rob Lee's belated April Fool's Tool...

#21

I have the greatest badge of honor already...

Alan DuBoff

>Moses,

Not a bad way to look at it, but I figure I have about the best badge of honor I could get out of the contest, I have my tool that I actually finished! *wink*

It's not perfect, and duly noted by the judges that the finish overall could use a bit more. I actually felt their comments were spot on.

The tool I made means enough to me, that I'm going to give it to my son, but not until I make a few things for him with it first. He's been wanting a new bed, so maybe that will be the first thing I use it on...my son is 17 years old, means the world to me (both my kids mean the world to me;-), enough that I would give my entry to my own son.

And just to show my appreciation for the contest, I'm going to be ordering a Boggs shave from Clarence, have never dealt with him before, but all the judges and folks that did manage the contest did a top notch job. I will give any business I can to them. Rob gets plenty of my business already, now I'll share some with Clarence too! The time he put into the contest is certainly appreciated by me. *wink*

Re: Rob Lee's belated April Fool's Tool...

#22

Amen to that Moses

Derek Cohen (in Perth, Australia)

>Hi Moses

That is exactly as I see it. I do not understand what the fuss is all about. The gauge is a little momento of a time when we got together and tested our skills in tool making, and shared this with each other.

I enjoyed the challenge in building the tool. The knowledge that it would be scrutinized by my peers kept the forum alongside me as I worked on it. The gauge will serve to remind me of that time.

My only complaint about the gauge is that it is so dang shiny that I have to wear sunglasses to read the numbers on it! :)

Also, are Canadian inches the same size as Australian inches? And ours are marked the other way around. :)

Regards from Perth

Derek