Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Look what I found for $20!

Posts

Look what I found for $20!

#1

Look what I found for $20!

Dominic Greco in Richboro PA

>Hi everyone,

On the way to Home Depot for Wasp/Hornet/Yellowjacket spray (nasty little buggers built a nest in my loft and every time I got to get wood they dive bomb me!) I just "happened" to stop off at the local Flea Market in Lambertville NJ.

At first I thought it would be a bad day because so few vendors were there. But I persevered. I walked the entire concourse and on the way back to my car took a detour through a row I had missed on the previous pass.

Lucky for me I did! I found a Bedrock 605 in somewhat solid shape. It's got some surface rust, a chipped tote and cracked knob. It's also missing the knob hardware. All of these problems are easily fixable. I already have a replacement knob (from an pre WWII No5 parts plane). The chipped tote is easy enough to fix. So all I need to do is clean up the body and then get some brass hard ware for the knob (actually I only need the brass nut. So if you have one and want to sell it, drop me a line!)



Oh, I forgot the best part. I got it for $20!

From the same vendor I also picked up a 60 1/2 for $5 that is only missing the lever to open and close the mouth (which I already have!). I also got a scraper blade for a #12 for $1.



Not bad, eh?

see ya around,

Dominic

Re: Look what I found for $20!

#2

Re: Look what I found for $20!

Todd O. Cronkhite Maine Native, Presently Away

>Dang Dom, not bad at all! Looks like it might have a wee bit of pitting on the sides, but nothing to fret about. Makes sure to show us some pics of it once it's all cleaned and making shavings.

YOU SUCK!!!!!!!!!!!

T.O.

Re: Look what I found for $20!

#3

Hi Todd

Dominic Greco in Richboro PA

>Todd,

Thanks!

Actually the sides look worse in the photo. But it's nothing that a little light lapping on my super scary sharp system won't remedy.

You wrote:

"YOU SUCK!!!!!!!!!!!"

Ahh, music to my ears! :>)

Later,

Dominic

Re: Look what I found for $20!

#4

Not to beat Todd's horse, but

Bruce, a MN Galoot

>YOU SUCK!

Great snag!

BTW, just finished making my version of your steady rest. Works great!

Bruce

Re: Look what I found for $20!

#5

Re: Look what I found for $20!

Kevin French, Antrim, NH

>So Dominic no close up of the Scraper, That might turn this purchase into a Gloat, hard to tell with that first pic.

Re: Look what I found for $20!

#6

Re: Look what I found for $20!

Dominic Greco in Richboro PA

>Not much to show on the scraper blade. It's bowed (along it's length. Which won't effect it that much when used in the #12) and looks like it might have been made from an old saw blade. For some reason I've been lucky and have been finding several of these #12 scraper blades in my last rust hunting forays.

Re: Look what I found for $20!

#7

Jack Guzman from Maine

Re: Look what I found for $20!

Jack Guzman from Maine

>Geez Dom,

Next thing you're gonna be showin' us the #1 you found for $1.I live in a very fruitful old tool area but haven't even seen a piece of broken rust with part of the word bedrock on it.(Not counting the beat up 605 in the antique store with a $250 price tag on it).I keep looking though,you never know. Nice find.---Jack

Re: Look what I found for $20!

#8

Hi Bruce!

Dominic Greco in Richboro PA

>Bruce,

Thanks!!

Glad to hear you made the steady rest. That was one of the most useful accessories I ever made for my lathe (next to the ballast box and trestle legs)

Later,

Dominic

Re: Look what I found for $20!

#9

Re: Look what I found for $20!

Dominic Greco in Richboro PA

>Jack,

Thanks! A find like this comes along once in a blue moon. You just have to be in the right place at the right time. It'll probably be a LONG time before I post a gloat like this again.

If I ever came across a No. 1 for a dollar I'd gloat here for a day and then sell that bad boy on Ebay faster than you could say "Paypal". Have you seen what they're going for these days? It's almost obscene! I'd use the proceeds to buy a LN No1 and a couple of other LV & LN planes I've been wanting!

See ya around,

Dominic

Re: Look what I found for $20!

#10

Jack Guzman from Maine

..so would I

Jack Guzman from Maine

>

Re: Look what I found for $20!

#11

Re: Look what I found for $20!

Adam Cherubini

>Hey neighbor,

I don't think the bedrock mechanism really offers much to a fore plane. Essentially, it offers some throat size adjustability on the fly and a stiffer/lower bed for the blade. Neither are mission critical for a jack plane.

So congratulations on the find, but I recommend selling that plane on ebay. You may be able to get $100 for it. You'll easily find a pre WWII sweat heart era #5 if you really need one, and you''ll have enough left over to take your sweetie out to dinner. That should ensure a willing rust hunting partner.

Adam

P.S. the bedrocks to have are the 604 and I could make a case for a 608 or 607. The 605 and 606 are both basically roughing planes better left to collectors or musical instrument makers or other folks who need small jointers.

Re: Look what I found for $20!

#12

Sorry to disagree, but...

Alan DuBoff

>Adam,

I respect your opinion, but Dom found a 605 for $20, it's a great plane and will clean up nicely. Why go through the trouble of selling it, to buy another one slightly cheaper that is not a Bedrock?

I would say it's a fine tool, he should clean it up and use it as he has been planning.

Even if there is no advantage to having a Bedrock, when you find one for $20, that's like pennies from heaven, IMO.

Re: Look what I found for $20!

#13

Depends on the individual

David Cockey

>"The 605 and 606 are both basically roughing planes"

Not necessarially. It depends on:

1) Scale of projects

2) Methods of work

3) Personal preferences

What is true for one individual may not be for another.

Re: Look what I found for $20!

#14

Hi Adam

Dominic Greco in Richboro PA

>Adam,

Thank you for responding. Let me first say that I really enjoy reading your articles in PWW. They are well thought out and very informative.

You wrote:

"I don't think the bedrock mechanism really offers much to a fore plane. Essentially, it offers some throat size adjustability on the fly and a stiffer/lower bed for the blade. Neither are mission critical for a jack plane.

So congratulations on the find, but I recommend selling that plane on ebay. You may be able to get $100 for it. You'll easily find a pre WWII sweat heart era #5 if you really need one..."

I'm relatively new to hand planes and therefore not as seasoned as some. And while I respect your advice and thank you for the input I think I'm going to hold onto this tool and put it to use.

BTW, I do have a pre-WWII Bailey No5 that was my first "real" plane. But I still prefer to use my current 605C rather than the Bailey. Both planes were tuned up the saw way and I even swapped blades back and forth to even the odds. I founds I just prefer to use the 605C for some reason!

You wrote:

"P.S. the bedrocks to have are the 604 and I could make a case for a 608 or 607. The 605 and 606 are both basically roughing planes better left to collectors or musical instrument makers or other folks who need small jointers."

I do have a 604, 607 and I just took delivery of a 608 today (Stealth Gloat: I got that for $118!). The 604 is really my all around favorite plane. :>)

Thanks again for the response. I look forward to reading your next article.

See ya around,

Dominic

Re: Look what I found for $20!

#15

Man! Some guys have all the luck!

Stuart Hough

>A 604,605,607,and a 608! GEEZ! Leave some for the rest of us!

Re: Look what I found for $20!

#16

It just happened

Dominic Greco in Richboro PA

>Stuart,

It's not like I just got all these. Over the past couple years I've been trying to upgrade some of my planes to Bedrocks. It's only recently that I managed to score the $20 605 and the 608 I mentioned.

Oh,..did I mention that the 608 came with a SW iron? :>)

Dominic

Re: Look what I found for $20!

#17

Re: Look what I found for $20!

ThomD

>I was reading the Bull of the Woods reprints that LV sell. I think metal shapers are cool, but by 1940s they are the subject of derisive jokes about how so and so chose the wrong career in running them. It further explained to me the self-doubt woodworkers must have felt being stuck in a dying trade, and reaching out for whatever crap technology that came along that might make them seem modern. A semi-modern example being perhaps the Miller Falls planes designed to look contemporary. Or contemporary power tools with laser beams, though I don't doubt those have some uses.

Takes nothing away from an excellent find though.

Re: Look what I found for $20!

#18

SCORE!

Scott Burr in Ben Lomond CA

>I think you've got enough "you suck" already. 8^)

Do you still neeed the brass nut? I have one if you need it.

Let me know...