Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Gloat, Gloat, and with modesty, Gloat! See new toy

Posts

Gloat, Gloat, and with modesty, Gloat! See new toy

#1

Gloat, Gloat, and with modesty, Gloat! See new toy

Roy Anderson

>See new toy below. I've been wanting one of these Lee Valley toys for a long time and finally broke down and bought one! It's a bevel up jointer, if you don't recognize it. And, with jointer fence.

I got the low angle blade, which is supplied, but next is to get at least one high angle blade. The great thing about the bevel up system is the way you can make one plane function as multiple planes, depending on the bevel angle of the blade.


img

Re: Gloat, Gloat, and with modesty, Gloat! See new toy

#2

Re: Gloat, Gloat, and with modesty, Gloat! See new

Derek Cohen (in Perth, Australia)

>Nice plane Roy. I have heard of it ..

When you get the second blade, as you say you plan to do, get another one with a 25 degree primary bevel if you plan to add a camber to it. I know that you want a high angle, but the 25 degree is the way to go (as I have been recommending for some time now). The thing is that it is easier to hone a camber on a 25 degree PB with a high angle microbevel than on a high angle PB (sans microbevel).

Of course, if you are going to keep the bevel straight, then it does not matter.

Regards from Perth

Derek

Re: Gloat, Gloat, and with modesty, Gloat! See new toy

#3

WOW! A Swiss army plane with training wheels!

Scott Burr in Ben Lomond CA

>Ha Ha Ha, Just kidding Roy 8^).

After all what would you rather have: A big YOU SUCK or a smart a$# remark.

Congrats on the new plane, enjoy!