Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

handle for gouge

Posts

handle for gouge

#1

Jack Guzman from Maine

handle for gouge

Jack Guzman from Maine

>I recently acquired a buck bros incannel gouge.The chisel has a long blade so I'm guessing it was designed as a patternmakers tool for paring.It has a bolstered tang.The edge is a wide(3/4")shallow sweep.I think a long straight handle will be best but I have no idea on shape. I've never had one of these. I need ideas on handle design.I have a lathe but I'm thinking this tool doesn't necessarily need a round handle. Maybe tapered four sided with bevelled edges? Any ideas will be greatly appreciated.---Jack

Re: handle for gouge

#2

Re: handle for gouge

Stephen Shepherd in the State of Deseret

>Here are a few choices. Almost all of my chisel and gouge handles are tapered square with the corners removed. I seldom use ferrules.

Stephen


img

Re: handle for gouge

#3

Jack Guzman from Maine

Re: handle for gouge

Jack Guzman from Maine

>I won't be needing a ferrule on this one,it'll never be struck. Thanks---Jack

Re: handle for gouge

#4

Some handles

Paul in NJ

>Jack,

Here is a picture of some of my mixed maker gouges. On the left are the out-cannel gouges. The top one is my handle, all the rest are originals. The third from the top and the bottom one are Buck chisels. The in-cannel gouges on the right all have new handles. I patterned them after an Ibbotson (Sheffield) gouge handle I kind of fancied. I've never seen that pattern on any other chisel or gouge.

Paul Dzioba


img

Re: handle for gouge

#5

Jack Guzman from Maine

Re: Some handles

Jack Guzman from Maine

>Nice handles.I saw a picture in a Buck bros ad that showed an incannel gouge like mine with a handle exactly like the third one down in your picture.Thanks for the picture.---jack

Re: handle for gouge

#6

Re: handle for gouge

Andrew Lunn

>Hi Jack,

I don't have any pictures to share, but I tend to like handles that have a slight waist to them. It gives my hand holding the gouge a more secure and natural purchase, without having to close my hand around the handle quite as tightly. Not a big deal, really, but for a tool like a gouge that you might manipulate hundreds of times in the course of a project, it adds up over time and increases the comfort and pleasure of the work. Good luck!