Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

Unusual rip saw with an unusual nicker nib

Posts

Unusual rip saw with an unusual nicker nib

#1

Unusual rip saw with an unusual nicker nib

Stephen Shepherd in the State of Deseret

>Here is a rip saw that I took a good look at today. It is in the queue for a new handle.

I have marked with soapstone where the nicking nib was originally located, it has broken off. It is 3/4" from the tip of the saw.

The blade is 27 1/2 inches long and starts out at 4 1/2 TPI and then the 5+ inches on the tip are 5 TPI. I have marked the transition on the blade.

There are no marks on the blade.

Stephen


img

Re: Unusual rip saw with an unusual nicker nib

#2

Unusual ?

Todd Hughes

>Looks like a pretty standard older saw which has the end of the blade cut back. I think many were done like this on purpose so that they would fit in portable tool boxes taken on siye by carpenters [my theory] Also common to find them with knibs broken or removed.Many rip saws came from the factory with gradurated teeth like this though this saw looks like it has been sharpened a bit. Often as the saws got sharpened they would loose the graduated teeth I think

"Knicker Nib".....don't think I ever heard a saw nib called that !....Todd