Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

I have a new website! *LINK*

Posts

I have a new website! *LINK*

#1

I have a new website! *LINK*

Derek Cohen (in Perth, Australia)

>Boys and girls

I have a new website. I really didn't think I could do this - and I was right! With a lot of help from a local specialist, basically teaching me what to do, I have completed a fair wack of its design and re-editing my articles, which have now been uploaded. There are still some links to go in, for example you will need to backspace out of articles.

Some of the files are large as I wanted to keep each article as a single page. The file images are small (40 Kb) and should load quite quickly, but they may need to be reduced even more (to 20 Kb).

There is still missing stuff, such as contact details, etc, but otherwise it is functional. Note that links to the old address (on wkfinetools) no longer work.

The new address is: www.inthewoodshop.com

There are already a couple of new articles, and a few more on the way. I hope you enjoy the site and use it as a reference. All feedback is welcomed to improve matters.

Regards from Perth

Derek


http://www.inthewoodshop.com/

Re: I have a new website! *LINK*

#2

Re: I have a new website!

richard jones

>Derek,

Great info, easy to maneuver as well. Lots of goodies for me to peruse, as I have a 3/8" Buck Brothers mortise chisel that is in need of a handle. Love the oval look as well as the practicality.

Good stuff, for sure, thanks.

Have a great day.

rich in va

Re: I have a new website! *LINK*

#3

AND its good look'n ! Congrats !

steve mackay

>

Re: I have a new website! *LINK*

#4

Dale Lenz

Re: Looking good, Derek!

Dale Lenz

>Read your very well written page on shooting boards, something I've been doing for a few years now. Will read a second time later, mainly on the planes you like to use. I use the LN low angle bevel up for shooting 3.25 x 3.25" miters, take two passes. Have book-marked you site for future reading. Thanks again, for posting, looking forward to more great learning. Dale

Re: I have a new website! *LINK*

#5

Looks nice, long overdue! ;-)

Alan DuBoff

>

Re: I have a new website! *LINK*

#6

Excellent! I bookmarked your website.

wilbur

>

Re: I have a new website! *LINK*

#7

Jack Guzman from Maine

Looks good

Jack Guzman from Maine

>Nice job. I also particularly liked your page on shooting boards.I'm still using a halfhearted attempt at one of those. I haven't found a design I like yet. Thanks for adding another valuable resource.---jack

Re: I have a new website! *LINK*

#8

Cool! It looks nice...

Scott Burr in Ben Lomond CA

>I'll have to stroll around it when I get a chance. I need to catch up on the 51-52 rebuild.