Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Hide Glue Mixing?

Posts

Hide Glue Mixing?

#1

Hide Glue Mixing?

David Wheeler

>What percent of salt or urea to dry weight of hide glue do you use to make it liquid? I've seen as much as 5TBS urea to 16TBS glue suggested in FAQ's which is over 30%. For some reason I thought the ratio was 8% or so.

My 60 to 65 degree shop is killing open time on glue ups; so I'm looking to extend that. The gram strength is 251 which doesn't help; but I've got a quantity of it.

Re: Hide Glue Mixing?

#2

Re: Hide Glue Mixing?

Stephen Shepherd in the State of Deseret

>David,

The quantity of anti gelling agents vary depending on the person making the mix. I have heard as low as 2% to as high as 30%. I think the latter may be excessive. It also depends on the gram strength of the hot hide glue that is being made into liquid hide glue. If you are going to experiment I would stay under 10%. Experiment with small batches to see what proportions work best for your conditions.

Stephen

Re: Hide Glue Mixing?

#3

Re: Hide Glue Mixing?

David Wheeler

>Thanks. One more question... is there any downside to using salt as opposed to urea? I've seen that it takes 40% less to get the same result.

Re: Hide Glue Mixing?

#4

Re: Hide Glue Mixing?

Stephen Shepherd in the State of Deseret

>Make sure the salt does not contain iodine, use a sea or rock salt.

I have some much more specific recipes for making liquid hide glue by using acid.

Stephen

Re: Hide Glue Mixing?

#5

urea quality, sources?

john jesseph

>Hi all; what are you using for urea? 46-0-0 fertilizer? I see dye stores sell urea for use in tye dying, maybe that might work. I am just concerned about impurities... Thanks!!