Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

A restored Disston D-4: Before/After pics

Posts

A restored Disston D-4: Before/After pics

#1

A restored Disston D-4: Before/After pics

Dominic Greco in Richboro PA

>Hello Everyone,

Do you people remember several weeks ago there was a Disston D-4 I was asking all those questions about? To refresh your memory if'n you don't, I was wondering about the original, quality, etc. I posted some photos and was amazed to be informed that it dates from before the turn of the century! The tote was chipped and paint splattered, and the blade was dull as an old butter knife and dirty as hell. So I decided to restore it.

Here's what it looked like before I started:



I cleaned the blade with some 300 to 600 wet dry sandpaper and sent it off to Daryl Weir to be sharpened. While the blade was off and getting tuned up, I stripped the old finish off the tote and repaired the busted horn using a piece of apple wood (since the tote is apple as well). I was hoping that the new apple would age and blend in better as time goes by. But after seeing it, I'm sort of liking the contrast! :>)






The handle was given several coats of sealer with sanding in between. Over the last week I gave it several coats of lacquer. After the lacquered hardened for several days, I wet sanded the tote with Micro Mesh up to 15000 grit and then applied automotive car polish. This is the same finish I give to the turned items I make like pens, bottle stoppers and peppermills. I know it's overkill but I just couldn't stop myself!

The brass hardware was cleaned and buffed until you could see yourself. The now sharp-as-hell blade was returned to me on Saturday just in time for me to finish up the tote. Everything was assembled tonight and given a coat of Renaissance Wax.

Daryl discovered a small problem while he was jointing the blade. it appears that sometime during the last 100 years or so someone dropped something on the blade and kinked it a bit. This is enough to render it somewhat useless as a carcass saw. However, it will still work dandy at a bench hook, or miters, and for cutting shoulders of tenons.

So,..what do you think of my first saw restoration?

See ya around,

My ugly mug


Dominic

Re: A restored Disston D-4: Before/After pics

#2

Re: A restored Disston D-4: Before/After pics

Ted Owen, Pittsburgh

>Wow, that's a beauty. Nice job, Dom.

Best, Ted

Re: A restored Disston D-4: Before/After pics

#3

Re: A restored Disston D-4: Before/After pics

Stuart Hough

>Looks real nice, Dominic. Happy sawing!

Re: A restored Disston D-4: Before/After pics

#4

Re: A restored Disston D-4: Before/After pics

Alan DuBoff

>Nice job, even if it is a Disston...*gd&r*

Re: A restored Disston D-4: Before/After pics

#5

Re: A restored Disston D-4: Before/After pics

Richard Jones

>Dom,

That really looks nice. I'm also in the middle of restoring an old Disston, actually a miter box saw from a 15 1/2 Langdon miter box, 16" blade, 2 1/2" width, 13ppi. Mine is dated "between the wars", and I look forward to finishing it up and sawing with it. Also need to do some more research to pin down the date through the Millers Falls side of it. Altho' Disston supposedly changed tote material sometime during this period, this one is a nice piece of apple.

Again, nice job, hope you enjoy it.

Rich

Re: A restored Disston D-4: Before/After pics

#6

Re: A restored Disston D-4: Before/After pics

Mike Fitterling

>Nice job, Dom! Looks just like my D-4 I made that osage orange tote for, maybe a bit shorter. Sure is a lot shinier than mine now. Now you need to get a Langdon Acme mitre box to stick it in!

Cheers,

Mike

Re: A restored Disston D-4: Before/After pics

#7

How did you . . .

steve mackay

>" attatch " the new horn ? Pins ? Notch ? You're right. It IS an interesting " feature ".

Re: A restored Disston D-4: Before/After pics

#8

Easy,...Glue!

Dominic Greco in Richboro PA

>Steve,

Thanks for the compliments. I just cut the old portion away and then planed/sanded that part flat. After making sure that the grain was oriented correctly, the mating surface on the piece of apple was also similarly flattened. I then used Gorilla Glue and some clamps.The next day I shaped it using a coping saw, spoke shave, block plane, and rasp. Then it was sanded. That's pretty much it.

See yaa round,

Dominic

Re: A restored Disston D-4: Before/After pics

#9

Thanks for the compiments!

Dominic Greco in Richboro PA

>Thanks for the compliments. I appreciate them

Re: A restored Disston D-4: Before/After pics

#10

Re: Easy,...Glue!

Tony Z.

>Dominic,

I'm not quite sure where Richboro is located, but this Friday at the Radisson in Camp Hill, PA (Harrisburg suburb) is the Fine Tool Journal/Brown Tool Sale and Auction. Friday is the tool sale and Saturday is the auction. Lots of Galoots and mucho handtools.

T.Z.

Re: A restored Disston D-4: Before/After pics

#11

Thanks for the heads up

Dominic Greco in Richboro PA

>But I don't think I'll be able to make it. The In Laws are coming over. And as much as I'd love to go and oogle all the cool old tools, I don't think my loving wife would understand.

Re: A restored Disston D-4: Before/After pics

#12

Looks real nice Dom!

Scott Burr in Ben Lomond CA

>You cleaned it up well. Nice patch job on the tote too!

Did Daryl just sharpen it? How'ed it turn out?

I gonna need some saws sharpened soon, so I'm curious.

Re: A restored Disston D-4: Before/After pics

#13

Dary did a GREAT job

Dominic Greco in Richboro PA

>Scott,

Thanks for the compliments! Daryl did a great job sharpening the saw. I only used it once and I was impressed.

See ya around,

Dominic

Re: A restored Disston D-4: Before/After pics

#14

You've got to put your foot down Dom!

Jay in Tx

>... but if you pull it back up with just a nub, don't blame me! ;~)

Jay Kilpatrick, trying to figure out how I ended up with Hermit crabs after saying 'no' to the wife and kids...

Re: A restored Disston D-4: Before/After pics

#15

Very nice! Time to plum 'blue' the back.

David Barnett - SW Florida

>